Annealing of aluminum implanted 4H-SiC: Comparison of furnace and lamp annealing

被引：4
|
作者：
Rambach, M
Bauer, AJ
Frey, L
Friedrichs, P
Ryssel, H
机构：
[1] Univ Erlangen Nurnberg, Chair Electron Devices, D-91058 Erlangen, Germany
[2] Fraunhofer Inst Integrated Syst & Device Technol, D-91058 Erlangen, Germany
[3] SiCED Elect Dev GmbH & Co KG, D-91050 Erlangen, Germany
来源：
SILICON CARBIDE AND RELATED MATERIALS 2004 | 2005年 / 483卷
关键词：
annealing; ion implantation; sheet resistance; surface roughness;
D O I：
10.4028/www.scientific.net/MSF.483-485.621
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Furnace annealing and lamp annealing of aluminum implanted layers in 4H silicon carbide (SiC) were investigated with respect to surface degradation and electrical parameters. A sheet resistance of about 20kΩ/□ was obtained for an aluminum implantation dose of 1.2.• 10(11)cm(-2) and annealing in the furnace at 1700° C for 30min. For the same implantation dose, lamp annealing at 1770° C for 5min resulted in a three times higher sheet resistance of 60kΩ/□. The surface roughness was best for the lamp system and stayed below 1nm for Al doses lower than 1• 10(15)cm(-2).
引用
收藏
页码：621 / 624
页数：4
相关论文
共 50 条
  • [41] Interstitial-based vacancy annealing in 4H-SiC
    Rauls, E
    Staab, TEM
    Hajnal, Z
    Frauenheim, T
    PHYSICA B-CONDENSED MATTER, 2001, 308 : 645 - 648
  • [42] Encapsulating annealing of N+ implanted 4H-SiC by diamond-like-carbon film
    Miyagawa, Shingo
    Suzuki, Tomoyuki
    Kudo, Takahiro
    Satoh, Masataka
    SILICON CARBIDE AND RELATED MATERIALS 2006, 2007, 556-557 : 583 - 586
  • [43] Isochronal annealing study of deep levels in hydrogen implanted p-type 4H-SiC
    Alfieri, G.
    Kimoto, T.
    SILICON CARBIDE AND RELATED MATERIALS 2006, 2007, 556-557 : 591 - +
  • [44] Microwave Annealing of High Dose Al+-implanted 4H-SiC: Towards Device Fabrication
    Nath, A.
    Rao, Mulpuri V.
    Tian, Y. -L.
    Parisini, A.
    Nipoti, R.
    JOURNAL OF ELECTRONIC MATERIALS, 2014, 43 (04) : 843 - 849
  • [45] Investigation of two-stage activation annealing of Al-implanted 4H-SiC layers
    Merrett, JN
    Scofield, JD
    Tsao, BH
    Mazzola, M
    Seale, D
    Draper, WA
    Sankin, I
    Casady, JB
    Bondarenko, V
    SILICON CARBIDE AND RELATED MATERIALS 2003, PTS 1 AND 2, 2004, 457-460 : 921 - 924
  • [46] Observation of thermal-annealing evolution of defects in ion-implanted 4H-SiC by luminescence
    Freitas, J. A., Jr.
    Jones, K. A.
    Derenge, M. A.
    Vispute, R. D.
    Hullavard, S.
    Silicon Carbide and Related Materials 2005, Pts 1 and 2, 2006, 527-529 : 847 - 850
  • [47] Activation of aluminum implanted at high doses in 4H-SiC
    1971, American Inst of Physics, Woodbury, NY, USA (88):
  • [48] Annealing study of a bistable defect in proton-implanted n-type 4H-SiC
    Nielsen, HK
    Martin, DM
    Lévêque, P
    Hallén, A
    Svensson, BG
    PHYSICA B-CONDENSED MATTER, 2003, 340 : 743 - 747
  • [49] Influences of postimplantation annealing conditions on resistance lowering in high-phosphorus-implanted 4H-SiC
    Senzaki, J. (junji-senzaki@aist.go.jp), 1600, American Institute of Physics Inc. (94):
  • [50] Microwave Annealing of High Dose Al+-implanted 4H-SiC: Towards Device Fabrication
    A. Nath
    Mulpuri V. Rao
    Y. -L. Tian
    A. Parisini
    R. Nipoti
    Journal of Electronic Materials, 2014, 43 : 843 - 849
12345