Annealing of aluminum implanted 4H-SiC: Comparison of furnace and lamp annealing

被引：4
|
作者：
Rambach, M
Bauer, AJ
Frey, L
Friedrichs, P
Ryssel, H
机构：
[1] Univ Erlangen Nurnberg, Chair Electron Devices, D-91058 Erlangen, Germany
[2] Fraunhofer Inst Integrated Syst & Device Technol, D-91058 Erlangen, Germany
[3] SiCED Elect Dev GmbH & Co KG, D-91050 Erlangen, Germany
来源：
SILICON CARBIDE AND RELATED MATERIALS 2004 | 2005年 / 483卷
关键词：
annealing; ion implantation; sheet resistance; surface roughness;
D O I：
10.4028/www.scientific.net/MSF.483-485.621
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Furnace annealing and lamp annealing of aluminum implanted layers in 4H silicon carbide (SiC) were investigated with respect to surface degradation and electrical parameters. A sheet resistance of about 20kΩ/□ was obtained for an aluminum implantation dose of 1.2.• 10(11)cm(-2) and annealing in the furnace at 1700° C for 30min. For the same implantation dose, lamp annealing at 1770° C for 5min resulted in a three times higher sheet resistance of 60kΩ/□. The surface roughness was best for the lamp system and stayed below 1nm for Al doses lower than 1• 10(15)cm(-2).
引用
收藏
页码：621 / 624
页数：4
相关论文
共 50 条
  • [21] Comparison of Solid-State Microwave Annealing with Conventional Furnace Annealing of Ion-Implanted SiC
    SIDDARTH G. SUNDARESAN
    MULPURI V. RAO
    YONGLAI TIAN
    JOHN A. SCHREIFELS
    MARK C. WOOD
    KENNETH A. JONES
    ALBERT V. DAVYDOV
    Journal of Electronic Materials, 2007, 36 : 324 - 331
  • [22] Comparison of solid-state microwave annealing with conventional furnace annealing of ion-implanted SiC
    Sundaresan, Siddarth G.
    Rao, Mulpuri V.
    Tian, Yonglai
    Schreifels, John A.
    Wood, Mark C.
    Jones, Kenneth A.
    Davydov, Albert V.
    JOURNAL OF ELECTRONIC MATERIALS, 2007, 36 (04) : 324 - 331
  • [23] Effects of annealing on carrier lifetime in 4H-SiC
    Jenny, J.R.
    Malta, D.P.
    Tsvetkov, V.F.
    Das, M.K.
    Hobgood, H.Mcd.
    Carter Jr., C.H.
    Kumar, R.J.
    Borrego, J.M.
    Gutmann, R.J.
    Aavikko, R.
    Journal of Applied Physics, 2006, 100 (11):
  • [24] Recombination enhanced defect annealing in 4H-SiC
    Storasta, L
    Carlsson, FHC
    Bergman, JP
    Janzén, E
    SILICON CARBIDE AND RELATED MATERIALS 2004, 2005, 483 : 369 - 372
  • [25] The role of nitrogen in the annealing of vacancies in 4H-SiC
    Dannefaer, S
    Avalos, V
    Yakimova, R
    SILICON CARBIDE AND RELATED MATERIALS 2004, 2005, 483 : 481 - 484
  • [26] Effects of annealing on carrier lifetime in 4H-SiC
    Jenny, J. R.
    Malta, D. P.
    Tsvetkov, V. F.
    Das, M. K.
    Hobgood, H. McD.
    Carter, C. H., Jr.
    Kumar, R. J.
    Borrego, J. M.
    Gutmann, R. J.
    Aavikko, R.
    JOURNAL OF APPLIED PHYSICS, 2006, 100 (11)
  • [27] Lateral straggling of implanted aluminum in 4H-SiC
    Muting, J.
    Bobal, V.
    Neset Sky, T.
    Vines, L.
    Grossner, U.
    APPLIED PHYSICS LETTERS, 2020, 116 (01)
  • [28] Pulsed Laser Annealing of Phosphorous-Implanted 4H-SiC: Electrical and Structural Characteristics
    Wu, Jingmin
    He, Zhi
    Guo, Zhiyu
    Tian, Run
    Wang, Fengxuan
    Liu, Min
    Yang, Xiang
    Fan, Zhongchao
    Yang, Fuhua
    JOURNAL OF ELECTRONIC MATERIALS, 2022, 51 (01) : 172 - 178
  • [29] Defects and electrical properties in Al-implanted 4H-SiC after activation annealing
    汤益丹
    刘新宇
    周正东
    白云
    李诚瞻
    Chinese Physics B, 2019, 28 (10) : 445 - 450
  • [30] Electrical activation of the ion-implanted phosphorus in 4H-SiC by excimer laser annealing
    Tanaka, Y. (yasunori-tanaka@aist.go.jp), 1600, American Institute of Physics Inc. (93):
12345