Influence of treatment conditions on the corrosion resistance of low temperature nitrided austenitic stainless steels

被引：0

作者：

Borgioli, F. ^{[1
]}

Galvanetto, E. ^{[1
]}

Caporali, S. ^{[1
]}

Gabellini, L. ^{[1
]}

Bacci, T. ^{[1
]}

机构：

[1] Univ Firenze, Florence, Italy

来源：

METALLURGIA ITALIANA | 2022年 / 114卷 / 02期

关键词：

NITRIDING; S PHASE; AUSTENITIC STAINLESS STEELS; LOCALISED CORROSION; ELECTROCHEMICAL-BEHAVIOR;

D O I：

暂无

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

Low temperature nitriding is an effective method of surface modification of austenitic stainless steels, which allows to improve their surface hardness and tribological properties, but the treatment conditions depend on steel composition. In this research the influence of nitriding conditions on the microstructural, mechanical and corrosion resistance characteristics of the modified surface layers has been evaluated for a Ni-free steel, UNS S29225, and, for comparison, for AISI 316L and AISI 202 steels. The modified surface layers consist mainly of the so called S phase. Ni-free steel is more sensitive to nitride precipitation than AISI 316L, so that treatments should be carried out at temperatures lower than 400 degrees C. By choosing the appropriate nitriding temperature and duration it is possible to obtain a significant increase of corrosion resistance in a 5% NaCl solution, in comparison with the untreated alloy.

引用

页码：7 / 12

页数：6

共 50 条

[31] The effect of molybdenum on corrosion of low-temperature nitrided stainless steels in sulphate–chloride solution
J. Flis
M. Kuczynska-Wydorska
I. Flis-Kabulska
Journal of Solid State Electrochemistry, 2006, 10 : 689 - 695
[32] Corrosion behaviour of low temperature nitrided nickel-free, AISI 200 and AISI 300 series austenitic stainless steels in NaCl solution
Borgioli, Francesca
Galvanetto, Emanuele
Bacci, Tiberio
CORROSION SCIENCE, 2018, 136 : 352 - 365
[33] Microstructure and corrosion resistance of plasma source ion nitrided austenitic stainless steel
Lei, MK
Zhang, ZL
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A, 1997, 15 (02): : 421 - 427
[34] Microstructure and corrosion resistance of plasma source ion nitrided austenitic stainless steel
Lei, M.K.
Zhang, Z.L.
Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, 1997, 15 (02):
[35] Influence of Heat Treatment Time and Temperature on the Microstructure and Corrosion Resistance of Cast Superaustenitic Stainless Steels
DuPont, J. N.
Farren, J. D.
CORROSION, 2011, 67 (05)
[36] Erosion-corrosion and corrosion properties of DLC coated low temperature gas-nitrided austenitic stainless steel
Jellesen, Morten S.
Christiansen, Thomas L.
Hilbert, Lisbeth Rischel
Moller, Per
WEAR, 2009, 267 (9-10) : 1709 - 1714
[37] INFLUENCE OF SILICON AND MANGANESE ON CORROSION BEHAVIOR OF AUSTENITIC STAINLESS STEELS
WILDE, BE
ARMIJO, JS
CORROSION, 1968, 24 (12) : 393 - &
[38] THE EFFECT OF HIGH-TEMPERATURE LOW-CYCLE FATIGUE ON THE CORROSION-RESISTANCE OF AUSTENITIC STAINLESS-STEELS
HOFFMANN, C
MCEVILY, AJ
METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1982, 13 (05): : 923 - 927
[39] Corrosion resistance of dissimilar welds between ferritic stainless steel with high corrosion resistance and austenitic stainless steels
Hamada, J.-I.
Nakata, M.
Inoue, H.
Ikegami, O.
Zairyo to Kankyo/ Corrosion Engineering, 2001, 50 (06): : 273 - 278
[40] Low Temperature Sensitization of Austenitic Stainless Steels.
Zucchi, R.
Zucchini, M.
Trabanelli, G.
Rocchini, G.
Colombo, E.
Metallurgia Italiana, 1981, 73 (05): : 199 - 206

← 1 2 3 4 5 →