Influence of treatment conditions on the corrosion resistance of low temperature nitrided austenitic stainless steels

被引：0
|
作者：
Borgioli, F. [1 ]
Galvanetto, E. [1 ]
Caporali, S. [1 ]
Gabellini, L. [1 ]
Bacci, T. [1 ]
机构：
[1] Univ Firenze, Florence, Italy
来源：
METALLURGIA ITALIANA | 2022年 / 114卷 / 02期
关键词：
NITRIDING; S PHASE; AUSTENITIC STAINLESS STEELS; LOCALISED CORROSION; ELECTROCHEMICAL-BEHAVIOR;
D O I：
暂无
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
Low temperature nitriding is an effective method of surface modification of austenitic stainless steels, which allows to improve their surface hardness and tribological properties, but the treatment conditions depend on steel composition. In this research the influence of nitriding conditions on the microstructural, mechanical and corrosion resistance characteristics of the modified surface layers has been evaluated for a Ni-free steel, UNS S29225, and, for comparison, for AISI 316L and AISI 202 steels. The modified surface layers consist mainly of the so called S phase. Ni-free steel is more sensitive to nitride precipitation than AISI 316L, so that treatments should be carried out at temperatures lower than 400 degrees C. By choosing the appropriate nitriding temperature and duration it is possible to obtain a significant increase of corrosion resistance in a 5% NaCl solution, in comparison with the untreated alloy.
引用
收藏
页码：7 / 12
页数：6
相关论文
共 50 条
  • [21] Corrosion of nitrided stainless steels with molybdenum
    Kuczynska-Wydorska, Monika
    Flis, Janusz
    OCHRONA PRZED KOROZJA, 2009, 52 (11): : 519 - 521
  • [22] Low temperature sensitization of austenitic stainless steels
    Menghani, J
    Patel, MN
    Agrawal, SK
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2002, 55 (05): : 455 - 460
  • [23] Wear resistance of glow-discharge nitrided r austenitic stainless steels
    Fossati, A.
    Borgioli, F.
    Galvanetto, E.
    Bacci, T.
    Metallurgia Italiana, 2007, 99 (03): : 29 - 34
  • [24] Microstructure/Mechanical Characterization of Plasma Nitrided Fine-Grain Austenitic Stainless Steels in Low Temperature
    Farghali, Abdelrahman
    Aizawa, Tatsuhiko
    Yoshino, Tomoaki
    NITROGEN, 2021, 2 (02): : 244 - 258
  • [25] Influence of the welding current intensity and nitrogen content on the corrosion resistance of austenitic stainless steels
    Jegdic, Bore V.
    Bobic, Biljana M.
    Radojkovic, Bojana M.
    Alic, Behar
    MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2018, 69 (12): : 1758 - 1769
  • [26] A comparative study of the tribocorrosion behaviour of low temperature nitrided austenitic and duplex stainless steels in NaCl solution
    Haruman, E.
    Sun, Y.
    Adenan, M. S.
    TRIBOLOGY INTERNATIONAL, 2020, 151 (151)
  • [27] Influence of MC Carbides on Pitting Corrosion Resistance of Weld Metal in Austenitic Stainless Steels
    Kadoi, Kota
    Kanno, Yudai
    Aoki, So
    Inoue, Hiroshige
    ISIJ INTERNATIONAL, 2024, 64 (09) : 1450 - 1456
  • [28] Influence of sulphide ions on corrosion resistance of special austenitic stainless steels in phosphoric acid
    Hajjaji, S.
    Roy, J.
    Aries, L.
    Dabosi, F.
    British Corrosion Journal, 1993, 28 (03): : 201 - 208
  • [29] Effect of Molybdenum on the Corrosion Resistance of Austenitic Stainless Steels.
    Defranoux, J.M.
    Materials Technology, 1974, 62 (03) : 137 - 143
  • [30] Corrosion resistance of three austenitic stainless steels for biomedical applications
    Terada, M.
    Antunes, R. A.
    Padilha, A. F.
    Costa, I.
    MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2007, 58 (10): : 762 - 766
12345