EXPERIMENTAL DETERMINATION OF PROCESS PARAMETERS FOR SUPERPLASTIC FORMING FROM AA7075 ALUMINUM ALLOY

被引：0
|
作者：
Nguyen, Manh Tien [1 ]
机构：
[1] Le Quy Don Tech Univ, Fac Mech Engn, Hanoi, Vietnam
来源：
SURANAREE JOURNAL OF SCIENCE AND TECHNOLOGY | 2022年 / 29卷 / 05期
关键词：
Superplastic Forming; Free Bulging Test; Tensile Test; Strain Rate Sensitivity; AA7075; Alloy; STRAIN-RATE SENSITIVITY; BEHAVIOR; TESTS;
D O I：
暂无
中图分类号：
O [数理科学和化学]; P [天文学、地球科学]; Q [生物科学]; N [自然科学总论];
学科分类号：
07 ; 0710 ; 09 ;
摘要：
In this study, experimental processes are presented to determine the process parameters for superplastic forming (SPF) AA7075 aluminum alloy. The thermomechanical method is performed to prepare the fine stable grain microstructure for AA7075 alloy. Subsequently, the tensile tests and the free bulging tests were carried out under different conditions for the alloy sheet with a thickness of 1.2 mm. The results determine the process parameter ranges of the SPF including deformation temperature of 500-530?, forming pressure of 0.6-0.8MPa, and forming time of 20-40 minutes. The strain rate sensitivity is also calculated with values in the range of 0.3-0.6. The obtained results are an important basis for designing the technological process for the SPF of the studied alloy.
引用
收藏
页数：6
相关论文
共 50 条
  • [41] Influence of process parameters on tribological behaviour of AA7075 in hot stamping
    Ghiotti, A.
    Simonetto, E.
    Bruschi, S.
    WEAR, 2019, 426 : 348 - 356
  • [42] Hot Granules Medium Pressure Forming Process of AA7075 Conical Parts
    DONG Guojiang
    ZHAO Changcai
    PENG Yaxin
    LI Ying
    Chinese Journal of Mechanical Engineering, 2015, 28 (03) : 580 - 591
  • [43] Exfoliation corrosion of aluminum alloy AA7075 examined by electrochemical impedance spectroscopy
    Cao, FH
    Zhang, Z
    Li, JF
    Cheng, YL
    Zhang, JQ
    Cao, CN
    MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2004, 55 (01): : 18 - 23
  • [44] Saltwater corrosion behavior of cold sprayed AA7075 aluminum alloy coatings
    Ngai, Sieglind
    Ngai, Tungwai
    Vogel, Florian
    Story, William
    Thompson, Gregory B.
    Brewer, Luke N.
    CORROSION SCIENCE, 2018, 130 : 231 - 240
  • [45] Hot Granules Medium Pressure Forming Process of AA7075 Conical Parts
    DONG Guojiang
    ZHAO Changcai
    PENG Yaxin
    LI Ying
    Chinese Journal of Mechanical Engineering, 2015, (03) : 580 - 591
  • [46] Hot granules medium pressure forming process of AA7075 conical parts
    Dong Guojiang
    Zhao Changcai
    Peng Yaxin
    Li Ying
    CHINESE JOURNAL OF MECHANICAL ENGINEERING, 2015, 28 (03) : 580 - 591
  • [47] Laser powder bed fusion of AA7075 alloy: Influence of process parameters on porosity and hot cracking
    Stopyra, Wojciech
    Gruber, Konrad
    Smolina, Irina
    Kurzynowski, Tomasz
    Kuznicka, Bogumila
    ADDITIVE MANUFACTURING, 2020, 35
  • [48] Effect of Forming-Die Temperature on Microstructure and Mechanical Properties of AA7075 Alloy During HFQ® Process
    Y. F. Jiang
    H. Ding
    M. H. Cai
    Y. Chen
    Y. Liu
    Y. S. Zhang
    Transactions of the Indian Institute of Metals, 2021, 74 : 725 - 734
  • [49] The Effect of Hot Forming-Quenching Integrated Process Conditions on Friction and Wear Behavior for AA7075 Alloy
    Jiang, Yifu
    Ding, Hua
    Yin, Xiaowei
    Liu, Jintao
    Wang, Lin
    Zhao, Qun
    Fan, Zhiguang
    Zhou, Jinhua
    Gao, Shuang
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2024, 33 (14) : 6986 - 6997
  • [50] Experimental study on cold forming process of 7075 aluminum alloy in W temper
    Min, Junying
    Xie, Fangli
    Liu, Yi
    Hou, Zeran
    Lu, Jiaxin
    Lin, Jianping
    CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY, 2022, 37 : 11 - 18
12345