EXPERIMENTAL DETERMINATION OF PROCESS PARAMETERS FOR SUPERPLASTIC FORMING FROM AA7075 ALUMINUM ALLOY

被引：0
|
作者：
Nguyen, Manh Tien [1 ]
机构：
[1] Le Quy Don Tech Univ, Fac Mech Engn, Hanoi, Vietnam
来源：
SURANAREE JOURNAL OF SCIENCE AND TECHNOLOGY | 2022年 / 29卷 / 05期
关键词：
Superplastic Forming; Free Bulging Test; Tensile Test; Strain Rate Sensitivity; AA7075; Alloy; STRAIN-RATE SENSITIVITY; BEHAVIOR; TESTS;
D O I：
暂无
中图分类号：
O [数理科学和化学]; P [天文学、地球科学]; Q [生物科学]; N [自然科学总论];
学科分类号：
07 ; 0710 ; 09 ;
摘要：
In this study, experimental processes are presented to determine the process parameters for superplastic forming (SPF) AA7075 aluminum alloy. The thermomechanical method is performed to prepare the fine stable grain microstructure for AA7075 alloy. Subsequently, the tensile tests and the free bulging tests were carried out under different conditions for the alloy sheet with a thickness of 1.2 mm. The results determine the process parameter ranges of the SPF including deformation temperature of 500-530?, forming pressure of 0.6-0.8MPa, and forming time of 20-40 minutes. The strain rate sensitivity is also calculated with values in the range of 0.3-0.6. The obtained results are an important basis for designing the technological process for the SPF of the studied alloy.
引用
收藏
页数：6
相关论文
共 50 条
  • [21] On the thermal forming limit diagram (TFLD) with GTN mesoscopic damage model for AA7075 aluminum alloy: Numerical and experimental investigation
    Ying, Liang
    Gao, Tianhan
    Rong, Hai
    Han, Xiao
    Hu, Ping
    Hou, Wenbin
    JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 802 : 675 - 693
  • [22] Modeling the anisotropic plasticity and damage of AA7075 alloy in hot forming
    Rong, Hai
    Hu, Ping
    Ying, Liang
    Hou, Wenbin
    Dai, Minghua
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2022, 215
  • [23] Optimum heating time for warm forming of AA7075 aluminum alloy in T6 condition
    Royne, Sylvain
    Laurent, Herve
    Maillard, Andre
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2024, 133 (11-12): : 6005 - 6021
  • [24] Viscoplastic behavior of AA7075 aluminum alloy at high strain rate
    Zhang, Keguo
    Cao, Yang
    An, Jianlin
    Wang, Keyi
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2021, 35 (12) : 5405 - 5413
  • [25] FSSW process parameter optimization for AA2024 and AA7075 alloy
    Anton Savio Lewise, K.
    Edwin Raja Dhas, J.
    MATERIALS AND MANUFACTURING PROCESSES, 2022, 37 (01) : 34 - 42
  • [26] Galvanic compatibility of corrosion protective coatings with AA7075 aluminum alloy
    Lodhi, Z. F.
    Hamer, W. J.
    Mol, J. M. C.
    Terryn, H.
    de Wit, J. H. W.
    MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2008, 59 (04): : 306 - 310
  • [27] Viscoplastic behavior of AA7075 aluminum alloy at high strain rate
    Keguo Zhang
    Yang Cao
    Jianlin An
    Keyi Wang
    Journal of Mechanical Science and Technology, 2021, 35 : 5405 - 5413
  • [28] Evolution of corrosion behavior for AA7075 aluminum alloy implanted with nitrogen
    Abreu, C. M.
    Cristobal, M. J.
    Figueroa, R.
    Novoa, X. R.
    Pena, G.
    NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS, 2019, 442 : 1 - 12
  • [29] Elevated temperature axisymmetric uniaxial compression of AA7075 aluminum alloy
    Jain, Mukesh
    Liang, Xiao
    MATERIALS TODAY-PROCEEDINGS, 2020, 28 : 955 - 963
  • [30] Thermal forming limit diagram (TFLD) of AA7075 aluminum alloy based on a modified continuum damage model: Experimental and theoretical investigations
    Rong, Hai
    Hu, Ping
    Ying, Liang
    Hou, Wenbin
    Zhang, Jinghuang
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2019, 156 : 59 - 73
12345