The effect of low dielectric polymer thickness on the electromigration characteristics of Al(1% Cu-0.5% Si) thin films

被引:2
|
作者
Yoo, S
Eun, BS
Kim, YH [1 ]
Chung, YC
机构
[1] Hanyang Univ, Dept Mat Engn, Seoul 133791, South Korea
[2] Hanyang Univ, Dept Inorgan Mat Engn, Seoul 133791, South Korea
关键词
electromigration; aluminium; low-k polymers; Joule heating;
D O I
10.1016/S0040-6090(00)01773-9
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The effect of the thickness of low-k polymer dielectrics on electromigration characteristics has been investigated. The dielectrics used in this study were several kinds of polyimides and SiLKTM-G. Low-pressure chemical vapor deposition (LPCVD)-SiO2 was used as a reference. It was found that the microstructure of Al thin films deposited on SiO2 and various polymer structures are almost the same. However, the electromigration (EM) lifetime of the Al/low-k polymer was approximately one order of magnitude shorter than that of Al/SiO2, and the measured lifetime decreased logarithmically with the thickness of polymer materials. The short EM lifetime of Al/low-k polymer was directly related to the temperature increase of IU lines due to Joule heating, since the thermal conductivity of the employed polymer films are approximately one order lower than that of SiO2. The poor thermal conduction in the polymers could also explain why EM lifetime decreased with the thickness of polymer dielectric layers and in order to apply low-k polymer to a future interlayer dielectric (ILD) that will have three to seven levels, the thickness effect of Al/polymer due to the Joule heating should be of serious concern. (C) 2001 Elsevier Science B.V. All rights reserved.
引用
收藏
页码:222 / 229
页数:8
相关论文
共 50 条
  • [21] Effect of pattern coating thickness on characteristics of lost foam Al-Si-Cu alloy casting
    Karimian, Majid
    Ourdjini, Ali
    Idris, Mohd Hasbullah
    Jafari, Hassan
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2012, 22 (09) : 2092 - 2097
  • [22] Thickness dependence of the martensitic transformation in textured Cu-Al-Ni thin films grown by sputtering on Si (001)
    Moran, M.
    Condo, A. M.
    Soldera, F.
    Sirena, M.
    Haberkorn, N.
    MATERIALS TODAY-PROCEEDINGS, 2019, 14 : 96 - 99
  • [23] Effect on Thickness of Al Layer in Poly-Crystalline Si Thin Films Using Aluminum(Al) Induced Crystallization Method
    Jeong, Chaehwan
    Na, Hyeon Sik
    Lee, Suk Ho
    JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 2011, 11 (02) : 1350 - 1353
  • [24] Effect of metal contacts on the electrical characteristics of Al2O3 dielectric thin films
    Yip, G.
    Qiu, J.
    Ng, W. T.
    Lu, Z. H.
    APPLIED PHYSICS LETTERS, 2008, 92 (12)
  • [25] ELECTROMIGRATION TRANSPORT MOBILITY ASSOCIATED WITH PULSED DIRECT-CURRENT IN FINE-GRAINED EVAPORATED AL-0.5-PERCENT-CU THIN-FILMS
    ENGLISH, AT
    KINSBRON, E
    JOURNAL OF APPLIED PHYSICS, 1983, 54 (01) : 275 - 280
  • [26] Effect of film thickness on the ferroelectric and dielectric properties of low-temperature (400 °C) Hf0.5Zr0.5O2 films
    Kim, Si Joon
    Mohan, Jaidah
    Lee, Jaebeom
    Lee, Joy S.
    Lucero, Antonio T.
    Young, Chadwin D.
    Colombo, Luigi
    Summerfelt, Scott R.
    San, Tamer
    Kim, Jiyoung
    APPLIED PHYSICS LETTERS, 2018, 112 (17)
  • [27] Effect of substrates on characteristics of magnetic co-sputtering Al-Cu-Fe thin films
    Zhou, Xi-Ying
    Xue, Xiang-Rong
    Xu, Zhou
    Qiangjiguang Yu Lizishu/High Power Laser and Particle Beams, 2008, 20 (10): : 1741 - 1743
  • [28] Correlations among sputter pressure, thickness, and coercivity in Al/Co/Cu magnetic thin films sputter-deposited on Si(001)
    Barnes, BM
    Kelly, JJ
    MacKay, JF
    O'Brien, WL
    Lagally, MG
    IEEE TRANSACTIONS ON MAGNETICS, 2000, 36 (05) : 2948 - 2950
  • [29] Thickness dependent glass transition temperature of PECVD low-k dielectric thin films:: effect of deposition methods
    Zhou, H
    Kim, HK
    Shi, FG
    Zhao, B
    Yota, J
    MICROELECTRONICS JOURNAL, 2002, 33 (03) : 221 - 227
  • [30] Evaluation of microstructure evolution of Al-1%Si-0.5%Cu thin film induced by post deposition processing
    Zaccherini, C
    Bacchetta, M
    Pavia, G
    Riva, L
    Savoia, C
    MATERIALS RELIABILITY IN MICROELECTRONICS VI, 1996, 428 : 273 - 277