Influence of the tool profile on the wear behaviour in gear hobbing

被引：15
|
作者：
Karpuschewski, Bernhard [1 ]
Beutner, Martin [1 ]
Koechig, Max [1 ]
Haerding, Christian [1 ]
机构：
[1] Otto von Guericke Univ, Inst Mfg Technol & Qual Management, Univ Pl 2, D-39106 Magdeburg, Germany
来源：
CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY | 2017年 / 18卷
关键词：
Gear; Machining; Tool geometry;
D O I：
10.1016/j.cirpj.2016.11.002
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Being the dominating green manufacturing technique to create external gears gear hobbing is of major industrial importance. The technology is characterized by a simultaneous superposition of kinematics and tool profile. Even though these tool profiles are standardized, in industries they are regularly being altered to fit the gear designer's demands regarding strength and contact ratio. Cutting gears with these modified and partly extreme tool profiles some geometries show critical wear behaviour. Despite existing experience-based knowledge, no systematic knowledge base is available. Therefore, this paper summarizes geometrical influences of the tool profile on the wear mechanisms. A variety of different tool profiles and gear geometries were tested within the fly cutting analogy test. The effects were also studied by means of FEM-simulation and interpenetration simulation. Finally, the wear phenomena were matched with load parameters. (C) 2016 CIRP.
引用
收藏
页码：128 / 134
页数：7
相关论文
共 50 条
  • [21] Influence of cutting edge preparation on the wear resistance in high speed dry gear hobbing
    Rech, J.
    WEAR, 2006, 261 (5-6) : 505 - 512
  • [22] Analysis on wear patterns and mechanisms of carbide tool for face-hobbing of spiral bevel gear
    Cheng, Yao-Nan
    Ma, Chun-Jie
    Zhang, Jian-Yu
    Zhou, Huan
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2023, 237 (6-7) : 925 - 936
  • [23] An Intelligent Deep Learning Technique for Predicting Hobbing Tool Wear Based on Gear Hobbing Using Real-Time Monitoring Data
    Hameed, Sarmad
    Junejo, Faraz
    Amin, Imran
    Qureshi, Asif Khalid
    Tanoli, Irfan Khan
    ENERGIES, 2023, 16 (17)
  • [24] Wear resistance of coatings in high speed gear hobbing
    Rech, J
    Djouadi, MA
    Picot, J
    WEAR, 2001, 250 : 45 - 53
  • [25] Investigation of the effects of alumina nanoparticles on spur gear surface roughness and hob tool wear in hobbing process
    S. Khalilpourazary
    S. S. Meshkat
    The International Journal of Advanced Manufacturing Technology, 2014, 71 : 1599 - 1610
  • [26] Influence of tooth profile deviations on helical gear wear
    Kahraman, A
    Bajpai, P
    Anderson, NE
    JOURNAL OF MECHANICAL DESIGN, 2005, 127 (04) : 656 - 663
  • [27] MODELLING OF TOOL WEAR IN GEAR HOBBING WITH COATED TOOLS BASED ON 3-AXIS MILLING INVESTIGATIONS
    Bouzakis, K. -D
    Kombogiannis, S.
    Bouzakis, E.
    JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION, 2012, 18 (02): : 207 - 216
  • [28] ONLINE TOOL WEAR ASSESSMENT DURING HOBBING
    MELDNER, B
    GALCZYNSKI, R
    KRUSZYNSKI, B
    MECHANIK MIESIECZNIK NAUKOWO-TECHNICZNY, 1978, 51 (07): : 343 - 346
  • [29] Investigation of the effects of alumina nanoparticles on spur gear surface roughness and hob tool wear in hobbing process
    Khalilpourazary, S.
    Meshkat, S. S.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2014, 71 (9-12): : 1599 - 1610
  • [30] Gear hobbing: a contribution to analogy testing and its wear mechanisms
    Stein, S.
    Lechthaler, M.
    Krassnitzer, S.
    Albrecht, K.
    Schindler, A.
    Arndt, M.
    FIFTH CIRP CONFERENCE ON HIGH PERFORMANCE CUTTING 2012, 2012, 1 : 220 - 225
12345