The Evolution of Structure and Mechanical Properties of Fe-Mn-V-Ti-0,1C Low-Carbon Steel Subjected to Severe Plastic Deformation and Subsequent Annealing

被引：1
|
作者：
Zakharova, Galina G. [1 ]
Astafurova, Elena G. [1 ]
Naydenkin, Eugene V. [1 ]
Raab, George I. [2 ]
Dobatkin, Sergey V. [3 ]
机构：
[1] Russian Acad Sci, Inst Strength Phys & Mat Sci, Siberian Branch, Tomsk, Russia
[2] Ufa State Aviat Tech Univ, Ufa, Russia
[3] Russian Acad Sci, AA Baikov Met Inst, Moscow, Russia
来源：
NANOMATERIALS BY SEVERE PLASTIC DEFORMATION: NANOSPD5, PTS 1 AND 2 | 2011年 / 667-669卷
关键词：
low-carbon steel; equal channel angular pressing; high pressure torsion; recrystallization; carbides; ferrite; pearlite;
D O I：
10.4028/www.scientific.net/MSF.667-669.325
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The present work deals with the evolution of mechanical properties and structure of low-carbon Fe-1,12Mn-0,08V-0,07Ti-0,1C (wt.%) steel after severe plastic deformation (SPD) and high-temperature annealing. Steel in initial ferritic-pearlitic state was deformed by equal channel angular pressing (ECAP) at T=200 degrees C and high pressure torsion (HPT) at room temperature. The evolution of ultrafine grained structure and its thermal stability were investigated after annealing at 400-700 degrees C for 1 hour. The results shown that SPD leads to formation of structure with an average size of (sub-) grain of 260 nm after ECAP and 90 nm after HPT. Ultrafine grained structures produced by SPD reveal a high thermal stability up to 500 degrees C after ECAP and 400 degrees C after HPT. At higher annealing temperatures a growth of structural elements and a decrease in microhardness were observed.
引用
收藏
页码：325 / +
页数：2
相关论文
共 50 条
  • [41] The influence of post-deformation annealing temperature on the mechanical properties of low-carbon ferritic steel deformed by the DRECE method
    Kowalczyk, Karolina
    MATERIALS SCIENCE-POLAND, 2021, 39 (03) : 430 - 435
  • [42] Effect of bimodal microstructure on texture evolution and mechanical properties of 1050 Al alloy processed through severe plastic deformation and subsequent annealing
    Hosseiny, Niloofar
    Shabani, Ali
    Toroghinejad, Mohammad Reza
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 820
  • [43] Effects of annealing temperature and V addition on microstructure and mechanical properties of Fe-Mn-Al-C austenitic low-density steel
    Xie, Zhiqi
    Hui, Weijun
    Bai, Saiyihan
    Zhang, Yongjian
    Zhao, Xiaoli
    Li, Binyang
    MATERIALS TODAY COMMUNICATIONS, 2023, 35
  • [44] Tribological properties of the low-carbon steels with different micro-structure processed by heat treatment and severe plastic deformation
    Huang, Song-Jeng
    Semenov, V. I.
    Shuster, L. Sh.
    Lin, Po-Chou
    WEAR, 2011, 271 (5-6) : 705 - 711
  • [45] Effect of Ti variation on microstructure evolution and mechanical properties of low carbon medium Mn heavy plate steel
    Hu, Jun
    Du, Lin-Xiu
    Dong, Ying
    Meng, Qing-Wang
    Misra, R. D. K.
    MATERIALS CHARACTERIZATION, 2019, 152 : 21 - 35
  • [46] Study on High-Temperature Mechanical Properties of Low-Carbon Fe-Mn-Si-Al TWIP Steel
    Li, Shiqi
    Liu, Jianhua
    Liu, Hongbo
    Zhuang, Changling
    Liu, Jian
    Han, Zhibiao
    HIGH TEMPERATURE MATERIALS AND PROCESSES, 2017, 36 (05) : 505 - 513
  • [47] INFLUENCE OF DISLOCATION-STRUCTURE CAUSED BY PLASTIC-DEFORMATION ON MAGNETIC AND MAGNETOELASTIC PROPERTIES OF IRON AND LOW-CARBON STEEL
    NICHIPURUK, AP
    NOSKOVA, NI
    GORKUNOV, ES
    PONOMAREVA, EG
    FIZIKA METALLOV I METALLOVEDENIE, 1992, (12): : 81 - 87
  • [48] INFLUENCE OF THE DRECE PROCESS OF SEVERE PLASTIC DEFORMATION ON THE MECHANICAL PROPERTIES OF THE ULTRA-LOW CARBON INTERSTITIAL FREE STEEL
    Kowalczyk, K.
    Jablonska, M.
    Rusz, S.
    Bednarczyk, I.
    ARCHIVES OF METALLURGY AND MATERIALS, 2018, 63 (04) : 2095 - 2100
  • [49] Mechanical properties of Ti-6Al-4V titanium alloy with submicrocrystalline structure produced by severe plastic deformation
    Zherebtsov, S
    Salishchev, G
    Galeyev, R
    Maekawa, K
    MATERIALS TRANSACTIONS, 2005, 46 (09) : 2020 - 2025
  • [50] Evolution of grain–subgrain structure and carbide subsystem upon annealing of a low-carbon low-alloy steel subjected to high-pressure torsion
    G. G. Maier
    E. G. Astafurova
    E. V. Melnikov
    A. I. Smirnov
    V. A. Bataev
    E. V. Naydenkin
    P. D. Odessky
    S. V. Dobatkin
    The Physics of Metals and Metallography, 2016, 117 : 1101 - 1110
12345