The Evolution of Structure and Mechanical Properties of Fe-Mn-V-Ti-0,1C Low-Carbon Steel Subjected to Severe Plastic Deformation and Subsequent Annealing

被引：1
|
作者：
Zakharova, Galina G. [1 ]
Astafurova, Elena G. [1 ]
Naydenkin, Eugene V. [1 ]
Raab, George I. [2 ]
Dobatkin, Sergey V. [3 ]
机构：
[1] Russian Acad Sci, Inst Strength Phys & Mat Sci, Siberian Branch, Tomsk, Russia
[2] Ufa State Aviat Tech Univ, Ufa, Russia
[3] Russian Acad Sci, AA Baikov Met Inst, Moscow, Russia
来源：
NANOMATERIALS BY SEVERE PLASTIC DEFORMATION: NANOSPD5, PTS 1 AND 2 | 2011年 / 667-669卷
关键词：
low-carbon steel; equal channel angular pressing; high pressure torsion; recrystallization; carbides; ferrite; pearlite;
D O I：
10.4028/www.scientific.net/MSF.667-669.325
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The present work deals with the evolution of mechanical properties and structure of low-carbon Fe-1,12Mn-0,08V-0,07Ti-0,1C (wt.%) steel after severe plastic deformation (SPD) and high-temperature annealing. Steel in initial ferritic-pearlitic state was deformed by equal channel angular pressing (ECAP) at T=200 degrees C and high pressure torsion (HPT) at room temperature. The evolution of ultrafine grained structure and its thermal stability were investigated after annealing at 400-700 degrees C for 1 hour. The results shown that SPD leads to formation of structure with an average size of (sub-) grain of 260 nm after ECAP and 90 nm after HPT. Ultrafine grained structures produced by SPD reveal a high thermal stability up to 500 degrees C after ECAP and 400 degrees C after HPT. At higher annealing temperatures a growth of structural elements and a decrease in microhardness were observed.
引用
收藏
页码：325 / +
页数：2
相关论文
共 50 条
  • [31] Evolution of the Structural-Phase State of a Ti–Al– V–Mo Alloy During Severe Plastic Deformation and SubSequent Annealing
    G. P. Grabovetskaya
    I. V. Ratochka
    I. P. Mishin
    O. V. Zabudchenko
    O. N. Lykova
    Russian Physics Journal, 2016, 59 : 109 - 115
  • [32] Microstructure and mechanical properties of an Fe-Mn-Al-C lightweight steel after dynamic plastic deformation processing and subsequent aging
    Li, Zongyuan
    Wang, Ying Chun
    Cheng, Xingwang
    Gao, Chong
    Li, Zhuang
    Langdon, Terence G.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2022, 833
  • [33] Microstructural evolution and mechanical properties of a low-carbon V-N-Ti steel processed with varied isothermal temperatures
    Shi, Genhao
    Luo, Baojian
    Zhang, Shuming
    Wang, Qingfeng
    Zhao, Hongli
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 801
  • [34] Mechanical properties and fracture behavior of ferritic-perlitic steel Fe-Mn-V-Ti-C subjected to equal channel angular pressing and higherature annealing
    Zakharova G.G.
    Astafurova E.G.
    Naydenkin E.V.
    Raab G.I.
    Dobatkin S.V.
    Inorganic Materials: Applied Research, 2011, 2 (04) : 370 - 376
  • [35] The Structure and Mechanical Properties of an Al-1.8Mn-1.6Cu Alloy Subjected to Severe Plastic Deformation
    Petrova, A. N.
    Astafiev, V. V.
    Kuryshev, A. O.
    PHYSICS OF METALS AND METALLOGRAPHY, 2024, 125 (12): : 1451 - 1456
  • [36] Mechanical Properties and Microstructure Evolution During Deformation of Fe-Mn-C TWIP Steel
    Mi Zhenli
    Tang Di
    Zhao Aimin
    Jiang Haitao
    STEEL RESEARCH INTERNATIONAL, 2012, 83 (04) : 346 - 351
  • [37] Mechanical properties of Fe-10Ni-7Mn martensitic steel subjected to severe plastic deformation via cold rolling and wire drawing
    Ghasemi-Nanesa, H.
    Nili-Ahmadabadi, M.
    Shirazi, H.
    15TH INTERNATIONAL CONFERENCE ON THE STRENGTH OF MATERIALS (ICSMA-15), 2010, 240
  • [38] Structure and magnetic properties of the Nd9.5Fe84.5B6 alloy subjected to severe plastic deformation and annealing
    Menushenkov V.P.
    Shchetinin I.V.
    Chernykh S.V.
    Savchenko A.G.
    Gorshenkov M.V.
    Zhukov D.G.
    Russian Metallurgy (Metally), 2017, 2017 (10) : 801 - 806
  • [39] Evolution of the Structural-Phase State of a Ti-Al- V-Mo Alloy During Severe Plastic Deformation and SubSequent Annealing
    Grabovetskaya, G. P.
    Ratochka, I. V.
    Mishin, I. P.
    Zabudchenko, O. V.
    Lykova, O. N.
    RUSSIAN PHYSICS JOURNAL, 2016, 59 (01) : 109 - 115
  • [40] Effect of intercritical annealing and subsequent ageing on the microstructure and mechanical properties of a medium Ni-Mn low carbon steel
    Koohdar, Hamidreza
    Roshanzadeh, Farshad
    Nayebpashaee, Nasim
    Jafarian, Hamid Reza
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2022, 20 : 3656 - 3666
12345