Fracture toughness evolution of a carbon/carbon composite after low-cycle fatigue

被引：6
|
作者：
Stepashkin, A. A. [1 ]
Ozherelkov, D. Yu [1 ]
Sazonov, Yu B. [1 ]
Komissarov, A. A. [1 ]
机构：
[1] Natl Univ Sci & Technol MISIS, Moscow 119991, Russia
来源：
ENGINEERING FRACTURE MECHANICS | 2019年 / 206卷
关键词：
Carbon/carbon composites (CCCs); Compression fatigue; Low cycle fatigue; J-Integral; CARBON-CARBON COMPOSITE; TENSILE FATIGUE; MECHANICAL-PROPERTIES; MATRIX COMPOSITES; BEHAVIOR; 2D; DAMAGE; IMPROVEMENT; FREQUENCY; STRENGTH;
D O I：
10.1016/j.engfracmech.2018.12.018
中图分类号：
O3 [力学];
学科分类号：
08 ; 0801 ;
摘要：
High fracture resistance of carbon/carbon (C/C) composites as a material for aircraft braking systems is essential for their safe service. This paper presents a study on fatigue behavior and residual mechanical properties after cyclic load of discretely-reinforced C/C composite. The influence of cyclic loads on the fracture toughness of frictional C/C composite was examined. Results of fracture toughness tests after compression fatigue load were determined using the ASTM single-notch three point bend test and correlated with fracture surface using scanning electron microscopy (SEM). It is revealed that C/C composite fracture toughness strongly depends on the fiber-matrix interfacial bonding strength. Cyclic loads below fatigue limit improve residual fracture toughness of the material up to 25% by the mechanism of interfaces weakening. Cyclic loads above fatigue limit decrease residual fracture toughness of the material by the fracture of carbon fibers. Observed results may be useful in developing friction C/C composites to enhance fracture resistance in aircraft braking systems, increasing safety and operating lifetime.
引用
收藏
页码：442 / 451
页数：10
相关论文
共 50 条
  • [1] Low-cycle Fatigue of Thermally-Cycled Carbon-Epoxy Composite
    Unigovski, Ya. B.
    Grinberg, A.
    Gutman, E. M.
    Shneck, R.
    JOURNAL OF METALS MATERIALS AND MINERALS, 2012, 22 (01): : 21 - 30
  • [2] High-Cycle, Low-Cycle, Extremely Low-Cycle Fatigue and Monotonic Fracture Behaviors of Low-Carbon Steel and Its Welded Joint
    Kim, Younghune
    Hwang, Woonbong
    MATERIALS, 2019, 12 (24) : 40111
  • [3] SIMILITUDE THEORY OF LOW-CYCLE FATIGUE FRACTURE
    DOBROVOLSKII, VI
    STRENGTH OF MATERIALS, 1981, 13 (06) : 682 - 689
  • [4] LOW-CYCLE FATIGUE AND DUCTILE FRACTURE FOR JAPANESE CARBON-STEEL PIPING UNDER DYNAMIC LOADINGS
    MIURA, N
    FUJIOKA, T
    KASHIMA, K
    KANNO, S
    HAYASHI, M
    ISHIWATA, M
    GOTOH, N
    NUCLEAR ENGINEERING AND DESIGN, 1994, 153 (01) : 57 - 69
  • [5] Effect of oxidation on fracture toughness of a carbon/carbon composite
    Zhang Chengyu
    Yan Kefei
    Qiao Shengru
    Li Mei
    Han Dong
    Guo Yong
    JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION, 2012, 27 (05): : 944 - 947
  • [6] Effect of oxidation on fracture toughness of a carbon/carbon composite
    Chengyu Zhang
    Kefei Yan
    Shengru Qiao
    Mei Li
    Dong Han
    Yong Guo
    Journal of Wuhan University of Technology-Mater. Sci. Ed., 2012, 27 : 944 - 947
  • [7] Effect of Oxidation on Fracture Toughness of a Carbon/Carbon Composite
    张程煜
    郭永
    Journal of Wuhan University of Technology(Materials Science), 2012, (05) : 944 - 947
  • [8] Low-cycle fatigue strength of notched low-carbon steel materials
    Department of Mechanical Engineering, Kinki University, 3-4-1 Kowakae, Higashi-Osaka-shi, Osaka, 577-8502, Japan
    Nihon Kikai Gakkai Ronbunshu A, 2006, 11 (1744-1750):
  • [9] Low-cycle fatigue behavior and microstructural evolution in a low-carbon carbide-free bainitic steel
    Zhou, Qian
    Qian, Lihe
    Meng, Jiangying
    Zhao, Leijie
    Zhang, Fucheng
    MATERIALS & DESIGN, 2015, 85 : 487 - 496
  • [10] EFFECT OF CARBON ON LOW-CYCLE FATIGUE OF ALLOY VK6.
    Kobitskoi, I.V.
    Emel'yanova, T.A.
    Tret'yakov, V.I.
    Russian metallurgy. Metally, 1987, (04) : 128 - 133
12345