Modelling and Characterisation of the Texture Development in the Fusion Zone of An Austenitic Weld

被引：3

作者：

Decroos, Koen ^{[1
]}

Seefeldt, Marc ^{[2
]}

Ohms, Carsten ^{[3
]}

Petrov, Roumen ^{[1
]}

Verhaeghe, Frederik ^{[2
]}

Kestens, Leo ^{[1
]}

机构：

[1] Univ Ghent, Fac Engn, Dept Mat Sci & Engn, B-9052 Ghent, Belgium

[2] Catholic Univ Louvain, Fac Engn, Dept Met & Mat Engn, B-3001 Louvain, Belgium

[3] Commiss European Communities, Joint Res Ctr, NL-1755 ZG Petten, Netherlands

来源：

STEEL RESEARCH INTERNATIONAL | 2011年 / 82卷 / 08期

关键词：

STEEL; PLATE;

D O I：

10.1002/srin.201000297

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

The relation between texture and microstructure and the macroscopic solidification direction has been investigated for an austenitic 316L stainless steel weld. The fusion zone has been characterised by EBSD. Texture development has been simulated by thermal Finite Element Analysis coupled with a simple model of preferential < 100 >-oriented solidification following the solidification direction. The thermal part is validated by means of thermocouple measurements at several locations on the specimen. The predicted texture is in very good agreement with the measured one.

引用

页码：911 / 917

页数：7

共 50 条

[31] DEVELOPMENT OF DEFORMATION TEXTURE IN BIAXIALLY STRAINED AUSTENITIC STEEL
ISTOMINA, ES
NIZHNIK, SB
RUSSIAN METALLURGY, 1973, 1974 (03): : 138 - 141
[32] Fusion zone and heat affected zone cracking susceptibility of stabilised austenitic stainless steels
Shankar, V
Gill, TPS
Mannan, SL
Sundaresan, S
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 1998, 3 (01) : 17 - 24
[33] DEVELOPMENT OF STEEL PLATES WITH IMPROVED COD VALUE IN WELD FUSION ZONE .10. INFLUENCE OF HARDNESS AND DISTRIBUTION OF MARTENSITE ISLAND ON COD OF MOST EMBRITTLED ZONE IN WELD HAZ
AIHARA, S
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 72 (13): : 1536 - 1536
[34] DEVELOPMENT OF STEEL PLATES WITH IMPROVED COD VALUE IN WELD FUSION ZONE .10. INFLUENCE OF HARDNESS AND DISTRIBUTION OF MARTENSITE ISLAND ON COD OF MOST EMBRITTLED ZONE IN WELD HAZ
HAZE, T
AIHARA, S
TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1987, 27 (03) : B83 - B83
[35] INFLUENCE OF HARDNESS AND DISTRIBUTION OF MARTENSITE ISLAND ON COD OF MOST EMBRITTLED ZONE IN WELD HAZ. (DEVELOPMENT OF STEEL PLATES WITH IMPROVED COD VALUE IN WELD FUSION ZONE - X).
Haze, Toshiaki
Aihara, Shuji
Transactions of the Iron and Steel Institute of Japan, 1986, 27 (03)
[36] Effect of Texture on the Cold Cracking in Weld Zone of T23 Steel
Jin, Yujing
Lu, Hao
ISIJ INTERNATIONAL, 2015, 55 (01) : 308 - 311
[37] Effect of weld heat input on fusion zone morphology of gamma TiAl
Acoff, V
Bharani, D
JOINING AND REPAIR OF GAS TURBINE COMPONENTS, CONFERENCE PROCEEDINGS FROM MATERIALS SOLUTION '97, 1997, : 137 - 142
[38] AN ANALYSIS OF COOLING CURVES FROM THE FUSION ZONE OF STEEL WELD DEPOSITS
SVENSSON, LE
GRETOFT, B
BHADESHIA, HKDH
SCANDINAVIAN JOURNAL OF METALLURGY, 1986, 15 (02) : 97 - 103
[39] TIME SPENT BY FUSION ZONE OF WELD METAL IN TRANSITION TEMPERATURE RANGE
PROKHORO.NN
PROKHORO.NN
AUTOMATIC WELDING USSR, 1968, 21 (11): : 6 - &
[40] Microstructural analysis of laser weld fusion zone in Haynes 282 superalloy
Osoba, L. O.
Ding, R. G.
Ojo, O. A.
MATERIALS CHARACTERIZATION, 2012, 65 : 93 - 99

← 1 2 3 4 5 →