Modelling and Characterisation of the Texture Development in the Fusion Zone of An Austenitic Weld

被引：3

作者：

Decroos, Koen ^{[1
]}

Seefeldt, Marc ^{[2
]}

Ohms, Carsten ^{[3
]}

Petrov, Roumen ^{[1
]}

Verhaeghe, Frederik ^{[2
]}

Kestens, Leo ^{[1
]}

机构：

[1] Univ Ghent, Fac Engn, Dept Mat Sci & Engn, B-9052 Ghent, Belgium

[2] Catholic Univ Louvain, Fac Engn, Dept Met & Mat Engn, B-3001 Louvain, Belgium

[3] Commiss European Communities, Joint Res Ctr, NL-1755 ZG Petten, Netherlands

来源：

STEEL RESEARCH INTERNATIONAL | 2011年 / 82卷 / 08期

关键词：

STEEL; PLATE;

D O I：

10.1002/srin.201000297

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

The relation between texture and microstructure and the macroscopic solidification direction has been investigated for an austenitic 316L stainless steel weld. The fusion zone has been characterised by EBSD. Texture development has been simulated by thermal Finite Element Analysis coupled with a simple model of preferential < 100 >-oriented solidification following the solidification direction. The thermal part is validated by means of thermocouple measurements at several locations on the specimen. The predicted texture is in very good agreement with the measured one.

引用

页码：911 / 917

页数：7

共 50 条

[21] IMPROVEMENT OF WELD FUSION ZONE TOUGHNESS BY FINE TIN
KANAZAWA, S
NAKASHIMA, A
OKAMOTO, K
KANAYA, K
TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1976, 16 (09) : 486 - 495
[22] Effect of high gravity on weld fusion zone shape
Aidun, D.K.
Domey, J.J.
Ahmadi, G.
Welding Journal (Miami, Fla), 2000, 79 (06):
[23] Development of deformation texture of austenitic steel wires
Ratuszek, W.
Kowalska, J.
Bunsch, A.
Ruminski, M.
Zielinska-Lipiec, A.
ARCHIVES OF METALLURGY AND MATERIALS, 2008, 53 (01) : 167 - 174
[24] EFFECT OF HEAT-AFFECTED ZONE STRUCTURE ON STRUCTURE OF WELD FUSION ZONE
LOPER, CR
SCHIDELE.LA
DEVLETIA.JH
WELDING JOURNAL, 1969, 48 (04) : S171 - &
[25] DEVELOPMENT OF WELD MODELLING GUIDELINES IN THE UK
Hurrell, P.
Watson, C.
Bouchard, J.
Smith, M.
Dennis, R.
Leggatt, N.
Bate, S.
Warren, A.
PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, VOL 6, PTS A AND B, 2010, : 481 - 489
[26] Characterisation of thin section dissimilar weld joint comprising austenitic and ferritic stainless steels
Srinivasan, P. Bala
Kumar, M. P. Satish
MATERIALS SCIENCE AND TECHNOLOGY, 2008, 24 (04) : 392 - 398
[27] Micromechanical characterisation of microstructure in weld heat affected zone of structural steel
Shimada, Yusuke
Kayamori, Yoichi
Nishida, Shohei
Matsuda, Mitsuhiro
Takashima, Kazuki
ADVANCES IN FRACTURE AND DAMAGE MECHANICS XI, 2013, 525-526 : 585 - +
[28] Development, characterisation, and modelling of processability of nitinol stents using laser powder bed fusion
Jamshidi, Parastoo
Panwisawas, Chinnapat
Langi, Enzoh
Cox, Sophie C.
Feng, Jiling
Zhao, Liguo
Attallah, Moataz M.
JOURNAL OF ALLOYS AND COMPOUNDS, 2022, 909
[29] Neurofuzzy model based control of weld fusion zone geometry
Zhang, YM
Li, L
Kovacevic, R
PROCEEDINGS OF THE 1997 AMERICAN CONTROL CONFERENCE, VOLS 1-6, 1997, : 2483 - 2487
[30] Development of recrystallization texture in austenitic steel with ferrite precipitates
Ratuszek, W
Rys, J
Pieniazek, J
Kowalska, J
ARCHIVES OF METALLURGY, 2002, 47 (03): : 243 - 260

← 1 2 3 4 5 →