Modelling and Characterisation of the Texture Development in the Fusion Zone of An Austenitic Weld

被引：3

作者：

Decroos, Koen ^{[1
]}

Seefeldt, Marc ^{[2
]}

Ohms, Carsten ^{[3
]}

Petrov, Roumen ^{[1
]}

Verhaeghe, Frederik ^{[2
]}

Kestens, Leo ^{[1
]}

机构：

[1] Univ Ghent, Fac Engn, Dept Mat Sci & Engn, B-9052 Ghent, Belgium

[2] Catholic Univ Louvain, Fac Engn, Dept Met & Mat Engn, B-3001 Louvain, Belgium

[3] Commiss European Communities, Joint Res Ctr, NL-1755 ZG Petten, Netherlands

来源：

STEEL RESEARCH INTERNATIONAL | 2011年 / 82卷 / 08期

关键词：

STEEL; PLATE;

D O I：

10.1002/srin.201000297

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

The relation between texture and microstructure and the macroscopic solidification direction has been investigated for an austenitic 316L stainless steel weld. The fusion zone has been characterised by EBSD. Texture development has been simulated by thermal Finite Element Analysis coupled with a simple model of preferential < 100 >-oriented solidification following the solidification direction. The thermal part is validated by means of thermocouple measurements at several locations on the specimen. The predicted texture is in very good agreement with the measured one.

引用

页码：911 / 917

页数：7

共 50 条

[1] STRUCTURAL HETEROGENEITY IN THE FUSION ZONE BETWEEN A MULTIPASS AUSTENITIC WELD AND A PEARLITIC STEEL
KIRILICHEV, NV
GOTALSKII, YN
AUTOMATIC WELDING USSR, 1980, 33 (09): : 20 - 24
[2] A Review on Fusion Welding of Dissimilar Ferritic/Austenitic Steels: Processing and Weld Zone Metallurgy
Giudice, Fabio
Missori, Severino
Scolaro, Cristina
Sili, Andrea
JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING, 2024, 8 (03):
[3] METHODS OF REDUCING THE WIDTH OF THE MARTENSITE INTERLAYER IN THE FUSION ZONE OF A PEARLITIC STEEL WITH AN AUSTENITIC WELD
GOTALSKII, YN
SNISAR, VV
NOVIKOVA, DP
WELDING PRODUCTION, 1981, 28 (06): : 3 - 5
[4] CHEMICAL HETEROGENEITY OF FUSION ZONE OF JOINTS IN MEDIUM ALLOY-STEELS WITH AN AUSTENITIC WELD METAL
MAKARA, AM
AUTOMATIC WELDING USSR, 1976, 29 (04): : 1 - 3
[5] Microstructure in the Weld Metal of Austenitic-Pearlitic Dissimilar Steels and Diffusion of Element in the Fusion Zone
Yajiang LI
Journal of Materials Science & Technology, 2001, (03) : 338 - 342
[6] THE STRUCTURE AND PROPERTIES OF THE TRANSITIONAL LAYER IN THE FUSION ZONE IN MEDIUM-ALLOY STEEL WITH AN AUSTENITIC WELD
STRUNETS, VK
NIKONOV, IP
GORDONNYI, VG
GORDAN, GN
AUTOMATIC WELDING USSR, 1980, 33 (11): : 19 - 22
[7] Microstructure in the weld metal of austenitic-pearlitic dissimilar steels and diffusion of element in the fusion zone
Li, YJ
Zou, ZD
Zhou, B
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2001, 17 (03) : 338 - 342
[8] An evaluation of creep rupture strength of ferritic/austenitic dissimilar weld interfaces using cohesive zone modelling
Hu, Jia-nan
Fukahori, Takuya
Igari, Toshihide
Chuman, Yasuharu
Cocks, Alan C. F.
21ST EUROPEAN CONFERENCE ON FRACTURE, (ECF21), 2016, 2 : 934 - 941
[9] EFFECTS OF MICROSTRUCTURE AND TEXTURE ON ULTRASONIC INSPECTION OF AUSTENITIC WELD METALS
Capobianco, Thomas E.
Young, George A., Jr.
Pyle, Joseph M.
Khan, Fateh N.
REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION, VOLS 31A AND 31B, 2012, 1430 : 1203 - 1210
[10] PREFERRED ORIENTATION IN WELD FUSION ZONE
SAVAGE, WF
ARONSON, AH
WELDING JOURNAL, 1966, 45 (02) : S85 - &

← 1 2 3 4 5 →