Geometric Modeling for Five-axis CNC Machining of Mold Surface with Flat-end Tool

被引：0
|
作者：
Gao, W. Q. [1 ]
Xie, B. [1 ]
Huang, Z. Y. [1 ]
Qing, C. T. [1 ]
机构：
[1] Guangdong Univ Technol, Fac Electromech Engn, Guangzhou 510006, Guangdong, Peoples R China
来源：
SURFACE FINISHING TECHNOLOGY AND SURFACE ENGINEERING II | 2010年 / 135卷
关键词：
Flat-end tool; Five-axis CNC machining; Interference check; Calculation of cutter location point;
D O I：
10.4028/www.scientific.net/AMR.135.41
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
This paper taken the flat-end tool and machined surface as a pair of mutually conjugate space contact tooth envelope surface and used the Frenet frame of differential geometry to describe the NC machining tool path in five-axis CNC machining of mold surface with flat-end tool. Thus the geometric model in five-axis CNC machining of mold surface with flat-end tool was established.
引用
收藏
页码：41 / 45
页数：5
相关论文
共 50 条
  • [41] Tool Orientation Optimization Based on Spatial Tractrix Method for Five-Axis CNC Machining with Ball End Cutters
    Zou, Xiang
    Shi, Ke
    Xu, Hai-Yin
    Tam, Hon-yuen
    COMMUNICATIONS IN MATHEMATICS AND STATISTICS, 2022, 10 (04) : 705 - 737
  • [42] Numerical and experimental modeling of thermal errors in a five-axis CNC machining center
    dos Santos, Marcelo O.
    Batalha, Gilmar F.
    Bordinassi, Ed C.
    Miori, Gelson F.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 96 (5-8): : 2619 - 2642
  • [43] Tool Orientation Optimization Based on Spatial Tractrix Method for Five-Axis CNC Machining with Ball End Cutters
    Xiang Zou
    Ke Shi
    Hai-Yin Xu
    Hon-yuen Tam
    Communications in Mathematics and Statistics, 2022, 10 : 705 - 737
  • [44] Nonlinearity Error Analysis with the Application of the Envelope Surface in Five-axis CNC Machining
    Zhou, Yuansheng
    Chen, Zezhong Chevy
    Fang, Zixi
    IFAC PAPERSONLINE, 2015, 48 (03): : 675 - 679
  • [45] MODELING AND COMPENSATION TECHNIQUE FOR THE GEOMETRIC ERRORS OF FIVE-AXIS CNC MACHINE TOOLS
    Wang ShuxinYun JintianZhang ZhifeiLiu YouwuZhang QingSchool of Mechanical Engineering
    Chinese Journal of Mechanical Engineering, 2003, (02) : 197 - 201
  • [46] Five-Axis Slerp for Tool-Orientation Planning in a Five-Axis CNC Machine
    Yan, Chang Dau
    Chieng, Wei-Hua
    Jeng, Shyr-Long
    JOURNAL OF THE CHINESE SOCIETY OF MECHANICAL ENGINEERS, 2018, 39 (06): : 565 - 574
  • [47] Five-Axis Slerp for Tool-Orientation Planning in a Five-Axis CNC Machine
    Yan, Chang Dau
    Chieng, Wei-Hua
    Jeng, Shyr-Long
    Journal of the Chinese Society of Mechanical Engineers, Transactions of the Chinese Institute of Engineers, Series C/Chung-Kuo Chi Hsueh Kung Ch'eng Hsuebo Pao, 2018, 39 (06): : 565 - 574
  • [48] Mechanistic Modeling of Five-Axis Machining With a Flat End Mill Considering Bottom Edge Cutting Effect
    Li, Zhou-Long
    Zhu, Li-Min
    JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2016, 138 (11):
  • [49] Five-axis tool path generation in CNC machining of T-spline surfaces
    Gan, Wen-Feng
    Fu, Jian-Zhong
    Shen, Hong-Yao
    Chen, Zhi-Yu
    Lin, Zhi-Wei
    COMPUTER-AIDED DESIGN, 2014, 52 : 51 - 63
  • [50] VARIABLE FEEDRATE INTERPOLATION OF NURBS TOOLPATH WITH GEOMETRIC AND KINEMATICAL CONSTRAINTS FOR FIVE-AXIS CNC MACHINING
    SUN Yuwen
    ZHOU Jianfeng
    GUO Dongming
    JournalofSystemsScience&Complexity, 2013, 26 (05) : 757 - 776
12345