Geometric Modeling for Five-axis CNC Machining of Mold Surface with Flat-end Tool

被引：0
|
作者：
Gao, W. Q. [1 ]
Xie, B. [1 ]
Huang, Z. Y. [1 ]
Qing, C. T. [1 ]
机构：
[1] Guangdong Univ Technol, Fac Electromech Engn, Guangzhou 510006, Guangdong, Peoples R China
来源：
SURFACE FINISHING TECHNOLOGY AND SURFACE ENGINEERING II | 2010年 / 135卷
关键词：
Flat-end tool; Five-axis CNC machining; Interference check; Calculation of cutter location point;
D O I：
10.4028/www.scientific.net/AMR.135.41
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
This paper taken the flat-end tool and machined surface as a pair of mutually conjugate space contact tooth envelope surface and used the Frenet frame of differential geometry to describe the NC machining tool path in five-axis CNC machining of mold surface with flat-end tool. Thus the geometric model in five-axis CNC machining of mold surface with flat-end tool was established.
引用
收藏
页码：41 / 45
页数：5
相关论文
共 50 条
  • [21] Highly Effective Way in Five-Axis Machining for the Sculptured Surfaces of Propeller Using Flat-End Cutter
    Lou, Yi
    Liu, Hu-ran
    Tan, Bo
    2018 3RD INTERNATIONAL CONFERENCE ON AUTOMATION, MECHANICAL AND ELECTRICAL ENGINEERING (AMEE 2018), 2018, 298 : 398 - 403
  • [22] Tool Path Interpolation Method in Five-Axis CNC Machining
    Wang, Jinjie
    Geng, Cong
    Geng, Dapeng
    Zhang, Han
    2023 9TH INTERNATIONAL CONFERENCE ON CONTROL, AUTOMATION AND ROBOTICS, ICCAR, 2023, : 268 - 272
  • [23] Optimization of machining strip width using effective cutting shape of flat-end cutter for five-axis free-form surface machining
    Baohai Wu
    Mancang Liang
    Ying Zhang
    Ming Luo
    Kai Tang
    The International Journal of Advanced Manufacturing Technology, 2018, 94 : 2623 - 2633
  • [24] Optimization of machining strip width using effective cutting shape of flat-end cutter for five-axis free-form surface machining
    Wu, Baohai
    Liang, Mancang
    Zhang, Ying
    Luo, Ming
    Tang, Kai
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 94 (5-8): : 2623 - 2633
  • [25] Ruled surface machining on five-axis CNC machine tools
    Lin, Rong-Shine
    Koren, Yoram
    Journal of Manufacturing Processes, 2000, 2 (01) : 25 - 35
  • [26] Tool orientation smooth interpolation algorithm for five-axis CNC machining
    Geng, Cong
    Yu, Dong
    Zhang, Han
    Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2013, 49 (03): : 180 - 185
  • [27] Computing of the actual shape of removed material for five-axis flat-end milling
    Plakhotnik, Denys
    Lauwers, Bert
    COMPUTER-AIDED DESIGN, 2012, 44 (11) : 1103 - 1114
  • [28] A tool path correction and compression algorithm for five-axis CNC machining
    Geng Cong
    Yu Dong
    Zheng Liaomo
    Zhang Han
    Wang Feng
    JOURNAL OF SYSTEMS SCIENCE & COMPLEXITY, 2013, 26 (05) : 799 - 816
  • [29] A TOOL PATH CORRECTION AND COMPRESSION ALGORITHM FOR FIVE-AXIS CNC MACHINING
    GENG Cong
    YU Dong
    ZHENG Liaomo
    ZHANG Han
    WANG Feng
    JournalofSystemsScience&Complexity, 2013, 26 (05) : 799 - 816
  • [30] A tool path correction and compression algorithm for five-axis CNC machining
    Cong Geng
    Dong Yu
    Liaomo Zheng
    Han Zhang
    Feng Wang
    Journal of Systems Science and Complexity, 2013, 26 : 799 - 816
12345