Fatigue failure behavior of glass/epoxy ±55 filament wound pipes under internal pressure

被引：88
|
作者：
Tarakçioglu, N
Gemi, L
Yapici, A [1 ]
机构：
[1] Selcuk Univ, Dept Mech Engn, TR-42075 Konya, Turkey
[2] Selcuk Univ, Tech Educ Fac, TR-42075 Konya, Turkey
来源：
COMPOSITES SCIENCE AND TECHNOLOGY | 2005年 / 65卷 / 3-4期
关键词：
fatigue; filament winding;
D O I：
10.1016/j.compscitech.2004.10.002
中图分类号：
TB33 [复合材料];
学科分类号：
摘要：
In this study, fatigue behavior of filament wound composite pipes under alternating internal pressure has been investigated. GRP pipes which made of E-glass/epoxy are tested under open ended conditions. Test specimens have four layers which have +/-55degrees winding angle. Tests have been done in accordance with ASTM D-2992. This standards offers 0.42 Hz frequency and R = 0.05 stress ratio. Tests have been performed at different load levels from 30% to 70% of ultimate strength. Whitening, leakage and final failure levels of GRP pipes have been observed. Fatigue results are presented and interpreted by means of S-N curves. (C) 2004 Elsevier Ltd. All rights reserved.
引用
收藏
页码：703 / 708
页数：6
相关论文
共 50 条
  • [41] Failure analysis of graphite/epoxy filament wound tubes under cyclic loading
    Masudi, H
    Green, J
    PROCEEDINGS OF THE 10TH (2000) INTERNATIONAL OFFSHORE AND POLAR ENGINEERING CONFERENCE, VOL IV, 2000, : 66 - 71
  • [42] FAILURE ANALYSES OF FILAMENT WOUND GRAPHITE EPOXY CYLINDERS UNDER BIAXIAL LOADING
    MARLOFF, RH
    RAGHAVA, RS
    SAMPE QUARTERLY-SOCIETY FOR THE ADVANCEMENT OF MATERIAL AND PROCESS ENGINEERING, 1985, 17 (01): : 40 - 45
  • [43] Analysis of filament-wound sandwich pipe under internal pressure
    Xia, M
    Kemmochi, K
    Takayanagi, H
    ADVANCED COMPOSITE MATERIALS, 2000, 9 (03) : 223 - 239
  • [44] Biaxial fatigue behaviour of a multidirectional filament-wound glass-fiber/epoxy pipe
    Ellyin, F
    Martens, M
    COMPOSITES SCIENCE AND TECHNOLOGY, 2001, 61 (04) : 491 - 502
  • [45] Investigation of the stress-strain constitutive behavior of ±55° filament wound GFRP pipes in compression and tension
    Betts, Dillon
    Sadeghian, Pedram
    Fam, Amir
    COMPOSITES PART B-ENGINEERING, 2019, 172 : 243 - 252
  • [46] Fatigue behavior of surface cracked filament wound pipes with high tangential strength in corrosive environment
    Avci, Ahmet
    Sahin, Omer Sinan
    Tarakcioglu, Necmettin
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2007, 38 (04) : 1192 - 1199
  • [47] The rate-dependent behaviour of +/-55 degrees filament-wound glass-fibre epoxy tubes under biaxial loading
    Carroll, M
    Ellyin, F
    Kujawski, D
    Chiu, AS
    COMPOSITES SCIENCE AND TECHNOLOGY, 1995, 55 (04) : 391 - 403
  • [48] Failure pressure and impact response of glass-epoxy pipes exposed to seawater
    Deniz, Mehmet Emin
    Ozdemir, Okan
    Ozen, Mustafa
    Karakuzu, Ramazan
    COMPOSITES PART B-ENGINEERING, 2013, 53 : 355 - 361
  • [49] The behavior of multidirectional filament wound fibreglass/epoxy tubulars under biaxial loading
    Ellyin, F
    Carroll, M
    Kujawski, D
    Chiu, AS
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 1997, 28 (9-10) : 781 - 790
  • [50] Influence of a reactive diluent on curing kinetics, Internal Curing Process, and Mechanical Performance of Filament Wound Glass Fiber-Reinforced Epoxy Composite Pipes
    Flores, Hugo A.
    Alejandra Ayude, Maria
    Riccardi, Carmen C.
    Fasce, Laura A.
    POLYMER ENGINEERING AND SCIENCE, 2019, 59 (02): : 344 - 354
12345