An experimental study on the failure of carbon/epoxy single lap riveted joints after thermal exposure

被引：27
|
作者：
Song, Min-Hwan [2 ]
Kweon, Jin-Hwe [1 ]
Kim, Sang-Kuk [2 ]
Kim, Cheol [2 ]
Lee, Tae-Joo [2 ]
Choi, Sang-Min [2 ]
Seong, Myeong-Su [1 ]
机构：
[1] Gyeongsang Natl Univ, Sch Mech & Aerosp Engn, Res Ctr Aircraft Parts Technol, Jinju 660701, Gyeongnam, South Korea
[2] Korea Aerosp Ind Ltd, Div Res & Dev, Sacheon 664802, Gyeongnam, South Korea
来源：
COMPOSITE STRUCTURES | 2008年 / 86卷 / 1-3期
基金：
新加坡国家研究基金会;
关键词：
single lap; joint; thermal exposure; strength;
D O I：
10.1016/j.compstruct.2008.03.029
中图分类号：
O3 [力学];
学科分类号：
08 ; 0801 ;
摘要：
The bearing strength of a blind riveted single lap joint of a carbon/epoxy composite after thermal exposure was Studied. Considering the maximum service temperature based on material specifications and glass transition temperature, six types of specimens were prepared and tested in accordance with ASTM D5961. Failure loads of specimens exposed to a 177 degrees C environment were above 90% compared to Sound specimens. Failure loads of 77% were obtained for specimens exposed to a 232 degrees C environment for 4 h. Bearing and rivet pulling-through failure modes were observed in all specimens. Delamination Caused by degradation of the matrix property was found in specimens exposed to temperature higher than 204 degrees C. (C) 2008 Elsevier Ltd. All rights reserved.
引用
收藏
页码：125 / 134
页数：10
相关论文
共 50 条
  • [31] Acoustic emission characterization of failure modes of single-lap joints in glass/epoxy specimens
    Bak, K. Mohamed
    Kalaichelvan, K.
    Jothilingam, A.
    RajendraBoopathy, S.
    JOURNAL OF COMPOSITE MATERIALS, 2016, 50 (01) : 3 - 23
  • [32] Investigation of the mechanical and thermal properties of epoxy adhesives reinforced by carbon nanotubes and silicon dioxide nanoparticles in single-lap joints
    Ekrem, Muersel
    Koyunbakan, Murat
    Unal, Bayram
    JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2024, 38 (20) : 3860 - 3875
  • [33] Experimental Characterization of the Properties of Double-Lap Needled and Hybrid Joints of Carbon/Epoxy Composites
    Arnautov, A.
    Nasibullins, A.
    Gribniak, V.
    Blumbergs, I.
    Hauka, M.
    MATERIALS, 2015, 8 (11): : 7578 - 7586
  • [34] Failure comparison of single and double lap joints after high temperature aging
    Wang D.-F.
    Chen H.-L.
    Na J.-X.
    Chen X.
    Jilin Daxue Xuebao (Gongxueban)/Journal of Jilin University (Engineering and Technology Edition), 2023, 53 (02): : 346 - 354
  • [35] Strength and Fracture Analysis of Single-Lap Self-Pierce Riveted Joints
    He, X.
    Lu, Y.
    Liu, F.
    Xing, B.
    Zeng, K.
    ACTA PHYSICA POLONICA A, 2015, 127 (04) : 1424 - 1426
  • [36] Fatigue behaviour analysis of aluminium alloy riveted single-shear lap joints
    Wang, He
    Li, Hechang
    Zhao, Yue
    Liu, Xuetong
    Peng, Jinfang
    Liu, Jianhua
    Zhu, Minhao
    INTERNATIONAL JOURNAL OF FATIGUE, 2023, 172
  • [37] Experimental Model Update for Single Lap Joints
    Gallas, Simone
    Devriendt, Hendrik
    Croes, Jan
    Naets, Frank
    Desmet, Wim
    NONLINEAR STRUCTURES & SYSTEMS, VOL 1, 2023, : 177 - 180
  • [38] Strength of carbon/epoxy composite single-lap bonded joints in various environmental conditions
    Park, Yong-Bin
    Song, Min-Gyu
    Kim, Joong-Jin
    Kweon, Jin-Hwe
    Choi, Jin-Ho
    COMPOSITE STRUCTURES, 2010, 92 (09) : 2173 - 2180
  • [39] An experimental study on the effect of overlap length on the failure of composite-to-aluminum single-lap bonded joints
    Kim, Tae-Hwan
    Kweon, Jin-Hwe
    Choi, Jin-Ho
    JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2008, 27 (10) : 1071 - 1081
  • [40] The failure stages of bolted double-lap metallic joints: experimental study
    Abu-Sinna, Ahmed
    Abd-Elhady, Amr A.
    Atta, Mahmoud
    Sallam, Hossam El-Din M.
    JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2018, 40 (08)
12345