Nonlinearities in mechanical behavior of textile composites

被引:14
|
作者
D'Amato, E [1 ]
机构
[1] Univ Aquila, Energet Dept, I-67040 Laquila, Italy
关键词
textiles; composites; nonlinear modeling;
D O I
10.1016/j.compstruct.2004.09.026
中图分类号
O3 [力学];
学科分类号
08 ; 0801 ;
摘要
In several configurations of fabrics, the fiber waviness can be significantly reduced under loading, introducing important modifications of mechanical behavior, mainly concerning the in plane textile stiffness; the phenomenon is of capital importance if the material has to be applied in single ply configuration. In the present paper a numerical approach is proposed for simulation of non-linear behavior of some textile composite layouts. The attention has been focused on plane weave textiles for aerospace and general applications: a triaxial carbon fiber/ester-cyanate resin and a biaxial glass fiber/PP textiles, which have been characterized on the basis of experimental or bibliography data, focusing the attention on main mechanical properties and their variation with the strain level in the material. Experimental data show the importance of nonlinear effects mainly caused by the variation of the waving of fibers under loading. A numerical analysis based on the use of standard finite element method has been developed, modeling the textile structure at a semi-microscopic level. Basic laminar theory has been used to calculate the elastic properties of a single yarn, whose geometry has been identified. Numerical results demonstrated the ability of the model to describe the textile behavior and appears a powerful tool for development of new layouts to define the best textile configuration for the specific application. (C) 2004 Elsevier Ltd. All rights reserved.
引用
收藏
页码:61 / 67
页数:7
相关论文
共 50 条
  • [41] Mechanical behavior of zirconia/alumina composites
    Choi, SR
    Bansal, NP
    CERAMICS INTERNATIONAL, 2005, 31 (01) : 39 - 46
  • [42] Impact Behavior of Textile and Hybrid Cement-Based Composites
    Haim, Efrat
    Peled, Alva
    ACI MATERIALS JOURNAL, 2011, 108 (03) : 235 - 243
  • [43] Electro-mechanical behavior of self-sensing textile-reinforced composites for in situ structural health monitoring
    Singh, Sudhanshu
    Kamble, Zunjarrao
    Neje, Ghanshyam
    JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2023, 43 (21-22) : 1205 - 1213
  • [44] Multi-scale modeling of mechanical behavior of cured woven textile composites accounting for the influence of yarn angle variation
    Liang, Biao
    Zhang, Weizhao
    Fenner, Joel S.
    Gao, Jiaying
    Shi, Yi
    Zeng, Danielle
    Su, Xuming
    Liu, Wing K.
    Cao, Jian
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2019, 124
  • [45] Identifying Sources of Variability in the Mechanical Performance of Resin Infused Textile Composites
    Timms, J.
    Mulchandani, H.
    Govignon, Q.
    Bickerton, S.
    RECENT ADVANCES IN TEXTILE COMPOSITES, 2008, : 434 - 443
  • [46] Textile geometry preprocessor for meso-mechanical models of woven composites
    Lomov, SV
    Gusakov, AV
    Huysmans, G
    Prodromou, A
    Verpoest, I
    COMPOSITES SCIENCE AND TECHNOLOGY, 2000, 60 (11) : 2083 - 2095
  • [47] Meso/macro-mechanical behaviour of textile reinforcements for thin composites
    Boisse, P
    Buet, K
    Gasser, A
    Launay, J
    COMPOSITES SCIENCE AND TECHNOLOGY, 2001, 61 (03) : 395 - 401
  • [48] Dynamic mechanical, thermal, and morphological study of ABS/textile fiber composites
    Martins, Johnny N.
    Klohn, Tobias G.
    Bianchi, Otavio
    Fiorio, Rudinei
    Freire, Estevao
    POLYMER BULLETIN, 2010, 64 (05) : 497 - 510
  • [49] Influence of Textile Treatment on Mechanical and Sorption Properties of Flax/Epoxy Composites
    Cherif, Zine Eddine
    Poilane, Christophe
    Falher, Thierry
    Vivet, Alexandre
    Ouail, Nabil
    Ben Doudou, Bessem
    Chen, Jun
    POLYMER COMPOSITES, 2013, 34 (10) : 1761 - 1773
  • [50] Dynamic mechanical, thermal, and morphological study of ABS/textile fiber composites
    Johnny N. Martins
    Tobias G. Klohn
    Otavio Bianchi
    Rudinei Fiorio
    Estevão Freire
    Polymer Bulletin, 2010, 64 : 497 - 510