Nonlinearities in mechanical behavior of textile composites

被引:14
|
作者
D'Amato, E [1 ]
机构
[1] Univ Aquila, Energet Dept, I-67040 Laquila, Italy
关键词
textiles; composites; nonlinear modeling;
D O I
10.1016/j.compstruct.2004.09.026
中图分类号
O3 [力学];
学科分类号
08 ; 0801 ;
摘要
In several configurations of fabrics, the fiber waviness can be significantly reduced under loading, introducing important modifications of mechanical behavior, mainly concerning the in plane textile stiffness; the phenomenon is of capital importance if the material has to be applied in single ply configuration. In the present paper a numerical approach is proposed for simulation of non-linear behavior of some textile composite layouts. The attention has been focused on plane weave textiles for aerospace and general applications: a triaxial carbon fiber/ester-cyanate resin and a biaxial glass fiber/PP textiles, which have been characterized on the basis of experimental or bibliography data, focusing the attention on main mechanical properties and their variation with the strain level in the material. Experimental data show the importance of nonlinear effects mainly caused by the variation of the waving of fibers under loading. A numerical analysis based on the use of standard finite element method has been developed, modeling the textile structure at a semi-microscopic level. Basic laminar theory has been used to calculate the elastic properties of a single yarn, whose geometry has been identified. Numerical results demonstrated the ability of the model to describe the textile behavior and appears a powerful tool for development of new layouts to define the best textile configuration for the specific application. (C) 2004 Elsevier Ltd. All rights reserved.
引用
收藏
页码:61 / 67
页数:7
相关论文
共 50 条
  • [21] A Model for Stochastic Characterisation of the Mechanical Properties of Textile Composites
    Crookston, J. J.
    Endruweit, A.
    Long, A. C.
    RECENT ADVANCES IN TEXTILE COMPOSITES, 2008, : 324 - 331
  • [22] Mechanical Analysis of Hybrid Textile Composites with NiTi Wires
    Villa, Elena
    Arnaboldi, Sergio
    Tuissi, Ausonio
    Giacomelli, Marco
    Turco, Elena
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2009, 18 (5-6) : 517 - 521
  • [23] Tensile behavior of textile reinforced flexible composites with notch
    Wang, Zexing
    Jiang, Jinghua
    Chen, Nanliang
    INDUSTRIA TEXTILA, 2011, 62 (01): : 24 - 29
  • [24] A Comparative Investigation of Physical Treatment of Matrix/Fiber on the Mechanical Behavior of Jute-Textile Reinforced Polymer Composites
    Tabassum, F.
    Kaiser, M. S.
    Ahmed, S. Reaz
    PROCEEDINGS OF THE 13TH INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING (ICME2019), 2021, 2324
  • [25] Mechanical Behaviour of Hybrid Composites Developed from Textile Waste
    Masood, Zaid
    Ahmad, Sheraz
    Umair, Muhammad
    Shaker, Khubab
    Nawab, Yasir
    Karahan, Mehmet
    FIBRES & TEXTILES IN EASTERN EUROPE, 2018, 26 (01) : 46 - 52
  • [26] Mechanical behaviors for textile composites by FEM based on damage mechanics
    Kurashiki, Tetsusei
    Nakai, Hiroaki
    Hirosawa, Satoru
    Imura, Makoto
    Zako, Masaru
    Verpoest, Ignaas
    Lomov, Stepan
    ADVANCES IN COMPOSITE MATERIALS AND STRUCTURES, PTS 1 AND 2, 2007, 334-335 : 257 - +
  • [27] A micromechanical modeling approach to the mechanical properties of textile elastomeric composites
    Huang, ZM
    Ramakrishna, S
    Tay, AAO
    MATERIALS SCIENCE RESEARCH INTERNATIONAL, 1999, 5 (03): : 189 - 194
  • [28] Mechanical characterization of textile reinforced inorganic-matrix composites
    D'Antino, T.
    Papanicolaou , Catherine
    COMPOSITES PART B-ENGINEERING, 2017, 127 : 78 - 91
  • [29] Mechanical properties of hemp textile composites made by VaRTM method
    Ishikawa, Hiroki
    Takagi, Hitoshi
    Nakagaito, Antonio Norio
    Genta, Hiroaki
    Saito, Hiroshi
    DESIGN, MANUFACTURING AND APPLICATIONS OF COMPOSITES, 2013, : 111 - 117
  • [30] Determination of the mechanical properties of textile-reinforced composites taking into account textile forming parameters
    Björn Van Den Broucke
    Nahiene Hamila
    Peter Middendorf
    Stepan V. Lomov
    Philippe Boisse
    Ignaas Verpoest
    International Journal of Material Forming, 2010, 3 : 1351 - 1361