INVESTIGATION OF MECHANICAL AND CORROSION PROPERTIES OF Al 7075/GARNET METAL MATRIX COMPOSITES BY TWO-STAGE STIR CASTING PROCESS

被引：6
|
作者：
Sambathkumar, M. [1 ]
Navaneethakrishnan, P. [1 ]
Sasikumar, K. S. K. [1 ]
Gukendran, R. [1 ]
Ponappa, K. [2 ]
机构：
[1] Kongu Engn Coll, Dept Mech Engn, Erode, Tamil Nadu, India
[2] Indian Inst Informat Technol Design & Mfg Jabalpu, Dept Mech Engn, Jabalpur, India
来源：
ARCHIVES OF METALLURGY AND MATERIALS | 2021年 / 66卷 / 04期
关键词：
Al; 7075; Garnet; Two-Stage Stir Casting; Mechanical Properties; Corrosion Properties; SLIDING WEAR BEHAVIOR;
D O I：
10.24425/amm.2021.136432
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The impact of Garnet addition into the AL7075 Aluminium matrix on the physical, mechanical and corrosion properties are studied in this research paper. Al 7075/garnet composites are fabricated by using two-stage stir casting method in different (0, 5, 10, 15) volume percentages. Photomicrograph of prepared samples revealed the uniform distribution of garnet reinforcement into the base matrix. The corrosion rate is calculated by potentiodynamic polarization method. The actual density is increased by around 1.2% for Al 7075 / garnet (15%) composite as compared to base alloy. Micro hardness of Al 7075 / garnet (15%) composite is raised by around 47 (34%) compare to as cast base matrix. Al7075 / garnet (15%) composite tensile strength stood at 252 Mpa, which is 40% greater than the base alloy. Al 7075 / 15% garnet composites reduce around 97% of corrosion rate than the base matrix. Alloy elements influenced the corrosion than Garnet reinforcement.
引用
收藏
页码：1123 / 1129
页数：7
相关论文
共 50 条
  • [41] Processing and mechanical properties of SiC reinforced cast magnesium matrix composites by stir casting process
    Poddar, Palash
    Srivastava, V. C.
    De, P. K.
    Sahoo, K. L.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 460 : 357 - 364
  • [42] Investigation of Nano-Al2O3 and Micro-coconut Shell Ash (CSA) Reinforced AA7075 Hybrid Metal–Matrix Composite Using Two-Stage Stir Casting
    Ashish Kumar
    R. C. Singh
    Rajiv Chaudhary
    Arabian Journal for Science and Engineering, 2022, 47 : 15559 - 15573
  • [43] Microstructural studies on aluminium metal matrix composite (Al7075-SiC) fabricated through stir casting process
    Gosavi, Swapnil, V
    Jaybhaye, M. D.
    MATERIALS TODAY-PROCEEDINGS, 2021, 39 : 1412 - 1416
  • [44] A review on mechanical properties of stir cast Al-2024 metal matrix composites
    Chandla, Nagender Kumar
    Kant, Suman
    Goud, M. M.
    ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, 2023, 9 (03) : 948 - 969
  • [45] Investigation of graphite effect on the mechanical and tribological properties of Al 7075-SiC-graphite hybrid metal matrix composites
    Sridhar A.
    Lakshmi K.P.
    Tribologia, 2020, 37 (01): : 26 - 32
  • [46] An Experimental Investigation on Mechanical and Tribological Properties of Metal Matrix Composites Fabricated with Waste Aluminum, SAC, and CDPF via Stir Casting
    Shailendra Kumar Verma
    Vijay Kumar Dwivedi
    Shashi Prakash Dwivedi
    Journal of The Institution of Engineers (India): Series D, 2025, 106 (1) : 325 - 331
  • [47] Manufacture of Aluminium Metal Matrix Composite (Al7075-SiC) by Stir Casting Technique
    Balaji, V.
    Sateesh, N.
    Hussain, M. Manzoor
    MATERIALS TODAY-PROCEEDINGS, 2015, 2 (4-5) : 3403 - 3408
  • [48] Characterization of Al metal matrix composites produced by the stir-casting method
    Anthymidis, K. G.
    David, K.
    Trakali, A.
    Agrianidis, P.
    ADVANCES IN FRACTURE AND DAMAGE MECHANICS XII, 2014, 577-578 : 85 - +
  • [49] Investigation of Nano-Al2O3 and Micro-coconut Shell Ash (CSA) Reinforced AA7075 Hybrid Metal-Matrix Composite Using Two-Stage Stir Casting
    Kumar, Ashish
    Singh, R. C.
    Chaudhary, Rajiv
    ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 2022, 47 (12) : 15559 - 15573
  • [50] Fabrication of Al6063 alloy, silicon carbide and boron glass powder metal matrix composites in stir casting process and analysis the impact of process variables on mechanical properties
    Madhankumar, S.
    Balamurugan, R.
    Rajesh, S.
    Senthilkumar, K. M.
    MATERIALS TODAY-PROCEEDINGS, 2021, 42 : 529 - 535
12345