INVESTIGATION OF MECHANICAL AND CORROSION PROPERTIES OF Al 7075/GARNET METAL MATRIX COMPOSITES BY TWO-STAGE STIR CASTING PROCESS

被引：6

作者：

Sambathkumar, M. ^{[1
]}

Navaneethakrishnan, P. ^{[1
]}

Sasikumar, K. S. K. ^{[1
]}

Gukendran, R. ^{[1
]}

Ponappa, K. ^{[2
]}

机构：

[1] Kongu Engn Coll, Dept Mech Engn, Erode, Tamil Nadu, India

[2] Indian Inst Informat Technol Design & Mfg Jabalpu, Dept Mech Engn, Jabalpur, India

来源：

ARCHIVES OF METALLURGY AND MATERIALS | 2021年 / 66卷 / 04期

关键词：

Al; 7075; Garnet; Two-Stage Stir Casting; Mechanical Properties; Corrosion Properties; SLIDING WEAR BEHAVIOR;

D O I：

10.24425/amm.2021.136432

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

The impact of Garnet addition into the AL7075 Aluminium matrix on the physical, mechanical and corrosion properties are studied in this research paper. Al 7075/garnet composites are fabricated by using two-stage stir casting method in different (0, 5, 10, 15) volume percentages. Photomicrograph of prepared samples revealed the uniform distribution of garnet reinforcement into the base matrix. The corrosion rate is calculated by potentiodynamic polarization method. The actual density is increased by around 1.2% for Al 7075 / garnet (15%) composite as compared to base alloy. Micro hardness of Al 7075 / garnet (15%) composite is raised by around 47 (34%) compare to as cast base matrix. Al7075 / garnet (15%) composite tensile strength stood at 252 Mpa, which is 40% greater than the base alloy. Al 7075 / 15% garnet composites reduce around 97% of corrosion rate than the base matrix. Alloy elements influenced the corrosion than Garnet reinforcement.

引用

页码：1123 / 1129

页数：7

共 50 条

[21] Analysis the mechanical properties and material characterization on Magnesium Metal Matrix Nano composites through stir casting process
Sathishkumar, P.
Deepakaravind, V.
Gopal, P.
Azhagiri, Pon
MATERIALS TODAY-PROCEEDINGS, 2021, 46 : 7436 - 7441
[22] Fabrication and characterization of GNPs and CNTs reinforced Al7075 matrix composites through the stir casting process
Ghazanlou, Siavash Imanian
Eghbali, Beitallah
INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 2021, 28 (07) : 1204 - 1214
[23] Fabrication and characterization of GNPs and CNTs reinforced Al7075 matrix composites through the stir casting process
Siavash Imanian Ghazanlou
Beitallah Eghbali
International Journal of Minerals, Metallurgy and Materials, 2021, 28 : 1204 - 1214
[24] Fabrication and characterization of GNPs and CNTs reinforced Al7075 matrix composites through the stir casting process
Siavash Imanian Ghazanlou
Beitallah Eghbali
International Journal of Minerals Metallurgy and Materials, 2021, 28 (07) : 1204 - 1214
[25] Experimental investigation and mechanical characterization of Al 5051 with nickel/titanium powder metal matrix composites using stir casting
Theja, P. Charan
Suresh, R.
Reddy, M. Chandra Sekhara
MULTISCALE AND MULTIDISCIPLINARY MODELING EXPERIMENTS AND DESIGN, 2025, 8 (01)
[26] Microstructural characterization and mechanical properties of Al7075/BN metal matrix composites prepared by conventional casting method
Kumar, V. Vignesh
Raja, K.
Chandrasekaran, K.
Ramkumar, T.
MATERIALS RESEARCH EXPRESS, 2019, 6 (06)
[27] Investigation on the effect of SiC and TiB2 ceramic particles on mechanical and tribological properties of Al7075 hybrid metal matrix composites prepared through conventional stir casting technique
Manoj, Mariadhas
Jinu, Gowthami Thankachi Raghuvaran
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2023,
[28] Mechanical characterization of aluminium hybrid metal matrix composites synthesized by using stir casting process
Babu, Anand K.
Venkataramaiah, P.
Reddy, Dharma K.
MATERIALS TODAY-PROCEEDINGS, 2018, 5 (14) : 28155 - 28163
[29] Production of Al metal matrix composites by the stir-casting method
Anthymidis, Konstantinos
David, K.
Agrianidis, P.
Trakali, A.
MATERIALS STRUCTURE & MICROMECHANICS OF FRACTURE VII, 2014, 592-593 : 614 - +
[30] Mechanical and corrosion properties of Al2O3/7075 aluminum matrix composites prepared by additive friction stir deposition
Bagheri, Ehsan
Adibi, Noushin
Ding, Huan
Chen, Yehong
Guo, Shengmin
PROGRESS IN ADDITIVE MANUFACTURING, 2025,

← 1 2 3 4 5 →