INVESTIGATION OF MECHANICAL AND CORROSION PROPERTIES OF Al 7075/GARNET METAL MATRIX COMPOSITES BY TWO-STAGE STIR CASTING PROCESS

被引：6
|
作者：
Sambathkumar, M. [1 ]
Navaneethakrishnan, P. [1 ]
Sasikumar, K. S. K. [1 ]
Gukendran, R. [1 ]
Ponappa, K. [2 ]
机构：
[1] Kongu Engn Coll, Dept Mech Engn, Erode, Tamil Nadu, India
[2] Indian Inst Informat Technol Design & Mfg Jabalpu, Dept Mech Engn, Jabalpur, India
来源：
ARCHIVES OF METALLURGY AND MATERIALS | 2021年 / 66卷 / 04期
关键词：
Al; 7075; Garnet; Two-Stage Stir Casting; Mechanical Properties; Corrosion Properties; SLIDING WEAR BEHAVIOR;
D O I：
10.24425/amm.2021.136432
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The impact of Garnet addition into the AL7075 Aluminium matrix on the physical, mechanical and corrosion properties are studied in this research paper. Al 7075/garnet composites are fabricated by using two-stage stir casting method in different (0, 5, 10, 15) volume percentages. Photomicrograph of prepared samples revealed the uniform distribution of garnet reinforcement into the base matrix. The corrosion rate is calculated by potentiodynamic polarization method. The actual density is increased by around 1.2% for Al 7075 / garnet (15%) composite as compared to base alloy. Micro hardness of Al 7075 / garnet (15%) composite is raised by around 47 (34%) compare to as cast base matrix. Al7075 / garnet (15%) composite tensile strength stood at 252 Mpa, which is 40% greater than the base alloy. Al 7075 / 15% garnet composites reduce around 97% of corrosion rate than the base matrix. Alloy elements influenced the corrosion than Garnet reinforcement.
引用
收藏
页码：1123 / 1129
页数：7
相关论文
共 50 条
  • [1] Mechanical and Corrosion Behavior of Al7075 (Hybrid) Metal Matrix Composites by Two Step Stir Casting Process
    Sambathkumar, M.
    Navaneethakrishnan, P.
    Ponappa, K.
    Sasikumar, K. S. K.
    LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES, 2017, 14 (02): : 243 - 255
  • [2] A Systematic Review on the Mechanical, Tribological, and Corrosion Properties of Al 7075 Metal Matrix Composites Fabricated through Stir Casting Process
    Sambathkumar, M.
    Gukendran, R.
    Mohanraj, T.
    Karupannasamy, D. K.
    Natarajan, N.
    Christopher, David Santosh
    ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2023, 2023
  • [3] Investigations on the microstructural evolution and mechanical properties of novel Al 6061/7075-granite-SiC metal matrix composites fabricated through two-stage stir casting
    Pillai, R. Rakesh
    Sekhar, R. Anand
    Shifin, A. S.
    Dadu, Mohith
    Ali, M. Mubarak
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2024, 238 (04) : 1860 - 1872
  • [4] Investigation on wear behaviour of Al7075-SiC metal matrix composites prepared by stir casting
    Bhowmik, Abhijit
    Chakraborty, Dipanjan
    Dey, Dipankar
    Biswas, Ajay
    MATERIALS TODAY-PROCEEDINGS, 2020, 26 : 2992 - 2995
  • [5] INVESTIGATION ON CORROSION AND WEAR PROPERTIES OF Al-7075/TiC COMPOSITES FABRICATED BY STIR CASTING ROUTE
    Velishala, Manoj
    Pandiripalli, Mahesh
    Vanitha, C.
    METALLURGICAL & MATERIALS ENGINEERING, 2022, 28 (03) : 435 - 452
  • [6] Investigation of mechanical and corrosion properties of Al 7075/Redmud metal matrix composite
    Sambathkumar, Mani
    Sasikumar, Kondayampalayam S. K.
    Gukendran, Rangasamy
    Dineshkumar, Karupannasamy
    Ponappa, Kannayiram
    Harichandran, Samiyappan
    REVISTA DE METALURGIA, 2021, 57 (01)
  • [7] Experimental study on mechanical properties of hybrid metal matrix composites using stir casting process
    Chitharthan, S.
    Divakar, S.
    Thalaieswaran, S.
    MATERIALS TODAY-PROCEEDINGS, 2021, 47 : 6926 - 6933
  • [8] Preparation and evaluation of mechanical properties of 6061Al-Al2O3 metal matrix composites by stir casting process
    Sivananthan, S.
    Reddy, V. Rajalaxman
    Samuel, C. Samson Jerold
    MATERIALS TODAY-PROCEEDINGS, 2020, 21 : 713 - 716
  • [9] Thermal analysis on Al7075/Al2O3 metal matrix composites fabricated by stir casting process
    Jacob, S.
    Shajin, S.
    Gnanavel, C.
    INTERNATIONAL CONFERENCE ON EMERGING TRENDS IN ENGINEERING RESEARCH, 2017, 183
  • [10] Investigation of mechanical properties of SiCp reinforced Al 7075 metal matrix composites: a case study
    Das, Diptikanta
    Sharma, Milind
    Samal, Chandrika
    Nayak, Ramesh Kumar
    MATERIALS TODAY-PROCEEDINGS, 2019, 18 : 3958 - 3965
12345