Prediction of fatigue life in cold expanded fastener holes subjected to bolt tightening in Al alloy 7075-T6 plate

被引：34

作者：

Taghizadeh, H. ^{[1
]}

Chakherlou, T. N. ^{[1
]}

Ghorbani, H. ^{[1
]}

Mohammadpour, A. ^{[1
]}

机构：

[1] Univ Tabriz, Fac Mech Engn, Tabriz, Iran

来源：

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES | 2015年 / 90卷

关键词：

Cold expansion; Bolt clamping; Fatigue life; Residual stress; Finite element; CLAMPING FORCE; RESIDUAL-STRESSES; EXPANSION; BEHAVIOR; THICKNESS; JOINTS; SIZE;

D O I：

10.1016/j.ijmecsci.2014.10.026

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

In this paper, stress analysis of holed plates was implemented in order to estimate the fatigue life due to the combined effect of cold expansion and bolt tightening (clamping force). The fatigue life was divided into two phases of crack initiation life and fatigue crack growth life. The fatigue crack initiation and fatigue crack growth life estimations have been investigated numerically and the total estimated fatigue lives have been compared with the available experimental fatigue test results. To obtain the residual stress, pre-stress and strain distributions created by cold expansion and bolt clamping force, and also the stress and strain distributions under cyclic longitudinal loads, three-dimensional finite element models were employed using ANSYS software. The results obtained from the finite element analysis of cold expansion and bolt clamping were employed to predict the fatigue crack initiation life using Fatemi-Socie multiaxial fatigue criterion, and fatigue crack growth life using AFGROW computer code. The results show that there is a good agreement between the numerically predicted total fatigue life and experimental fatigue test results. (C) 2014 Elsevier Ltd. All rights reserved.

引用

页码：6 / 15

页数：10

共 50 条

[21] Effect of humidity on growth behavior of a fatigue crack of 7075-T6 extruded Al alloy
Daiichi Univ., Coll. of Tech., Kokubu-chuo, Kirishima, 899-4395, Japan
不详
不详
不详
Zairyo, 8 (712-718):
[22] Identification and Validation of a Low Cycle Fatigue Damage Model for Al 7075-T6 Alloy
Masih, Saeed
Mashayekhi, Mohammad
Torabian, Noushin
JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 2015, 137 (01):
[23] Effect of anodic oxidation on fatigue performance of 7075-T6 alloy
Cirik, E.
Genel, K.
SURFACE & COATINGS TECHNOLOGY, 2008, 202 (21): : 5190 - 5201
[24] EFFECT OF SHOT PEENING ON THE FATIGUE BEHAVIOR OF ALLOY 7075-T6
WAS, GS
PELLOUX, RM
METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1979, 10 (05): : 656 - 658
[25] A study on the combined effect of notch and fretting on the fatigue life behaviour of Al 7075-T6
Rahmat, M. A.
Ibrahim, R. N.
Oskouei, R. H.
MATERIALS & DESIGN, 2014, 60 : 136 - 145
[26] Fitting corrosion and fatigue behavior of aluminum alloy 7075-T6
Sankaran, KK
Perez, R
Jata, KV
ADVANCED MATERIALS & PROCESSES, 2000, 158 (02): : 53 - 54
[27] AN INVESTIGATION ON THE GROWTH OF FATIGUE CRACK BETWEEN SEQUENTIALLY COLD EXPANDED ADJACENT CIRCULAR HOLES IN Al 7075 - T651 ALLOY
Kumar, S. Anil
Babu, N. C. Mahendra
MATERIALS PHYSICS AND MECHANICS, 2021, 47 (03): : 475 - 482
[28] Fractographic analysis of the AA 7075-T6 alloy subjected to fatigue in the RRA treatment condition and plasma nitride
Rocha, Elisa Gombio
Camarinha, Maria Gabriela Galvao
Reis, Danieli Aparecida Pereira
MATERIA-RIO DE JANEIRO, 2023, 28 (01):
[29] Ratcheting strain and its effect on low cycle fatigue behavior of Al 7075-T6 alloy
Sreenivasan, S.
Mishra, Srimant Kumar
Dutta, Krishna
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 698 : 46 - 53
[30] On the correlation of mechanical and physical properties of 7075-T6 Al alloy
Clark, R
Coughran, B
Traina, I
Hernandez, A
Scheck, T
Etuk, C
Peters, J
Lee, EW
Ogren, J
Es-Said, OS
ENGINEERING FAILURE ANALYSIS, 2005, 12 (04) : 520 - 526

← 1 2 3 4 5 →