Prediction of fatigue life in cold expanded fastener holes subjected to bolt tightening in Al alloy 7075-T6 plate

被引：34

作者：

Taghizadeh, H. ^{[1
]}

Chakherlou, T. N. ^{[1
]}

Ghorbani, H. ^{[1
]}

Mohammadpour, A. ^{[1
]}

机构：

[1] Univ Tabriz, Fac Mech Engn, Tabriz, Iran

来源：

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES | 2015年 / 90卷

关键词：

Cold expansion; Bolt clamping; Fatigue life; Residual stress; Finite element; CLAMPING FORCE; RESIDUAL-STRESSES; EXPANSION; BEHAVIOR; THICKNESS; JOINTS; SIZE;

D O I：

10.1016/j.ijmecsci.2014.10.026

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

In this paper, stress analysis of holed plates was implemented in order to estimate the fatigue life due to the combined effect of cold expansion and bolt tightening (clamping force). The fatigue life was divided into two phases of crack initiation life and fatigue crack growth life. The fatigue crack initiation and fatigue crack growth life estimations have been investigated numerically and the total estimated fatigue lives have been compared with the available experimental fatigue test results. To obtain the residual stress, pre-stress and strain distributions created by cold expansion and bolt clamping force, and also the stress and strain distributions under cyclic longitudinal loads, three-dimensional finite element models were employed using ANSYS software. The results obtained from the finite element analysis of cold expansion and bolt clamping were employed to predict the fatigue crack initiation life using Fatemi-Socie multiaxial fatigue criterion, and fatigue crack growth life using AFGROW computer code. The results show that there is a good agreement between the numerically predicted total fatigue life and experimental fatigue test results. (C) 2014 Elsevier Ltd. All rights reserved.

引用

页码：6 / 15

页数：10

共 50 条

[1] On the fatigue behavior of cold expanded fastener holes subjected to bolt tightening
Chakherlou, T. N.
Alvandi-Tabrizi, Y.
Kiani, A.
INTERNATIONAL JOURNAL OF FATIGUE, 2011, 33 (06) : 800 - 810
[2] The effect of electroless Ni-P coatings on the fatigue life of Al 7075-T6 fastener holes with symmetrical slits
Rahmat, M. A.
Oskouei, R. H.
Ibrahim, R. N.
Raman, R. K. Singh
INTERNATIONAL JOURNAL OF FATIGUE, 2013, 52 : 30 - 38
[3] The influence of corrosion pits and cold expanded fastener holes on the fatigue life aluminium 7075-T651
Withy, Benjamin
Campbell, Stephen
Stephen, Glenn
11TH INTERNATIONAL FATIGUE CONGRESS, PTS 1 AND 2, 2014, 891-892 : 87 - +
[4] Fatigue behavior of interference fitted Al-alloy 7075-T651 specimens subjected to bolt tightening
Taghizadeh, H.
Chakherlou, T. N.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, 2019, 233 (09) : 1879 - 1893
[5] Fatigue life prediction of laser-MIG hybrid welded 7075-T6 Al alloy joints
Wu, Shengchuan
Zhou, Xinmiao
Zhang, Weihua
Yu, Xiao
Xu, Xiaobo
Hanjie Xuebao/Transactions of the China Welding Institution, 2013, 34 (02): : 5 - 8
[6] Effect of split sleeve cold expansion on microstructure and fatigue performance of 7075-T6 aluminum alloy holes
Wang, Chenguang
Zou, Fan
Zhou, Entao
Fan, Zhilei
Ge, Ende
An, Qinglong
Ming, Weiwei
Chen, Ming
INTERNATIONAL JOURNAL OF FATIGUE, 2023, 167
[7] Environmental Fatigue of 7075-T6 Aluminum Alloy
Ebara, R.
McEvily, A. J.
ADVANCES IN FRACTURE AND DAMAGE MECHANICS IX, 2011, 452-453 : 13 - +
[8] Fatigue life of 7075-T6 aluminium alloy under fretting condition
Muthu, Jacob
THEORETICAL AND APPLIED FRACTURE MECHANICS, 2014, 74 : 200 - 208
[9] Fatigue Crack Growth Rates in Friction Stir Welding Joints of 7075-T6 Al Alloy and Fatigue Life Prediction based on AFGROW
Zou, Binlian
Yang, Xinqi
Chen, Jiahua
MATERIALS PROCESSING TECHNOLOGY, 2011, 337 : 507 - 510
[10] An FE analysis for assessing the effect of short-term exposure to elevated temperature on residual stresses around cold expanded fastener holes in aluminum alloy 7075-T6
Aghdam, A. B.
Chakherlou, T. N.
Saeedi, K.
MATERIALS & DESIGN, 2010, 31 (01) : 500 - 507

← 1 2 3 4 5 →