High temperature oxidation of Ti-48%Al-2%W intermetallics

被引：7

作者：

Shim, WS ^{[1
]}

Lee, DB ^{[1
]}

机构：

[1] Sungkyunkwan Univ, Ctr Adv Plasma Surface Technol, Suwon 440746, South Korea

来源：

METALS AND MATERIALS INTERNATIONAL | 2003年 / 9卷 / 05期

关键词：

TiAl; intermetallics; tungsten; oxidation;

D O I：

10.1007/BF03027153

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Powder metallurgically produced Ti-48%Al-2%W alloys were oxidized between 800 and 1050degreesC in air. The W-addition was quite effective in providing isothermal and cyclic oxidation resistance. The alloys oxidized parabolically up to 1050degreesC during isothermal oxidation, with small weight gains. The scales were adherent up to 900degreesC during cyclic oxidation. Oxide scales consisted primarily of an outer TiO2 layer, an intermediate Al2O3 layer, and an inner (TiO2+Al2O3) mixed layer. Tungsten was present below the intermediate Al2O3 layer, and also at the scale-matrix interface as W-enriched compounds. Below the oxide scale, a Ti3Al zone containing some W and O existed.

引用

页码：473 / 477

页数：5

共 50 条

[11] Anomalous wetting of Ti-48 at.% Al-2 at.% Cr-2 at.% Nb substrates by liquid copper
Gale, WF
Shen, Y
Fergus, JW
Wen, X
JOURNAL OF MATERIALS RESEARCH, 1999, 14 (10) : 3889 - 3894
[12] A QUANTITATIVE INVESTIGATION OF PHASE-FORMATION DURING ANNEALING OF COLD-EXTRUDED ELEMENTAL POWDER MIXTURES TI-48 AT-PERCENT AL AND TI-48 AT-PERCENT AL-2 AT-PERCENT CR
BOHNENKAMP, U
WANG, GX
JEWETT, TJ
DAHMS, M
INTERMETALLICS, 1994, 2 (04) : 275 - 283
[13] High temperature oxidation behaviour of Ti3Al-Nb intermetallics
Jha, SK
Khanna, AS
Harendranath, CS
HIGH TEMPERATURE CORROSION AND PROTECTION OF MATERIALS 4, PTS 1 AND 2, 1997, 251-2 : 203 - 210
[14] Modelling wide gap TLP bonding of Ti-48 at.-%Al-2 at.-%Cr-2 at.-%Nb alloys
Zhou, T
Gale, WF
MATERIALS SCIENCE AND TECHNOLOGY, 2003, 19 (08) : 1084 - 1090
[15] Structure and High-Temperature Oxidation of Ti-Al-Nb and Ti-Al-Ta Intermetallics
Vojtech, Dalibor
Popela, Tomas
MATERIALS STRUCTURE & MICROMECHANICS OF FRACTURE, 2011, 465 : 227 - 230
[16] Research on Ti-48%Al-2%Cr-2%Nb automobile exhaust valve cast by centrifugal casting process in permanent mold
Sheng, W.B.
Li, D.
Yang, R.
Guo, J.J.
Liu, Y.Y.
Su, Y.Q.
Jia, J.
Zhuzao/Foundry, 2001, 50 (03):
[17] Effects of surface conditions on room temperature ductility in Ti-48 at%Al alloy
Motohashi, Y
Murata, Y
Kaminaga, T
Sakuma, T
Tsujimoto, T
Nakamura, M
JOURNAL OF THE JAPAN INSTITUTE OF METALS, 2000, 64 (11) : 1012 - 1019
[18] High-temperature oxidation of intermetallics based on Ti-Al-Si system
Knaislová A.
Šimůnková V.
Novák P.
Knaislová, Anna (knaisloa@vscht.cz), 2018, Jan-Evangelista-Purkyne-University (18): : 255 - 258
[19] Decomposition processes of α phase in a Ti-48 at% Al alloy
Nakai, K
Momosaki, T
Ohmori, Y
MATERIALS TRANSACTIONS JIM, 2000, 41 (03): : 406 - 413
[20] Formation of deformation textures in the Ti-48 at% Al alloy
Rubina, EB
RUSSIAN METALLURGY, 1996, (04): : 69 - 77

← 1 2 3 4 5 →