Experimental and numerical analysis of single lap composite joints with inter-adherend fibers

被引：18

作者：

Beylergil, Bertan ^{[2
]}

Cunedioglu, Yusuf ^{[2
]}

Aktas, Alaattin ^{[1
]}

机构：

[1] Istanbul Univ, Dept Mech Engn, Fac Engn, TR-34320 Istanbul, Turkey

[2] Nigde Univ, Dept Mech Engn, Fac Engn, TR-51245 Nigde, Turkey

来源：

COMPOSITES PART B-ENGINEERING | 2011年 / 42卷 / 07期

关键词：

Adhesion; Mechanical testing; Numerical analysis; Stitching; I DELAMINATION TOUGHNESS; LAMINATED COMPOSITES; BONDED JOINTS; STRENGTH; MODE; FAILURE; PERFORMANCE; BEHAVIOR; DAMAGE; CFRPS;

D O I：

10.1016/j.compositesb.2011.06.010

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In this study, a novel reinforcing method for glass-fiber reinforced composites, which consists of inter-adherend glass fibers (IAF) that get through the composite adherend like a pin, was investigated experimentally and numerically. Two types of joints were investigated. One is the traditional single lap joint without inter-adherend (Type A) and the other is Type B in which the fiber pin was used. Static tensile tests were performed at ambient environment in accordance with ASTM standards. In the numerical analysis, ANSYS 12.0 software package was used. The results show that the fibers improve the ultimate strength and damage tolerance of composite joints. In addition, the numerical results show a good agreement with the experimental ones. (C) 2011 Elsevier Ltd. All rights reserved.

引用

页码：1885 / 1896

页数：12

共 50 条

[31] Experimental and numerical analysis on fatigue durability of single-lap joints under vibration loads
Li, Weidong
Zhou, Shenguang
Shi, Zhiwei
Wang, Xiaoxiao
Hu, Ping
JOURNAL OF ADHESION, 2017, 93 (03): : 187 - 203
[32] Experimental analysis of single-lap composite joints with two different adhesives at various conditions
Ghanbari, Esmaeil
Sayman, Onur
Pekbey, Yeliz
Ozdemir, Okan
JOURNAL OF COMPOSITE MATERIALS, 2016, 50 (13) : 1709 - 1715
[33] STRENGTH EVALUATION OF ASYMMETRIC SINGLE LAP JOINTS .1. EFFECTS OF THE ADHEREND THICKNESS
KYOGOKU, H
SUGIBAYASHI, T
IKEGAMI, K
BULLETIN OF THE JSME-JAPAN SOCIETY OF MECHANICAL ENGINEERS, 1986, 29 (247): : 1 - 7
[34] The effect of adherend thickness on the failure of adhesively-bonded single-lap joints
Aydin, MD
Özel, A
Temiz, S
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2005, 19 (08) : 705 - 718
[35] A new geometry for improving the strength of single lap joints using adherend notching technique
Beigrezaee, M. J.
Ayatollahi, M. R.
Bahrami, B.
da Silva, L. F. M.
JOURNAL OF ADHESION, 2021, 97 (11): : 1004 - 1023
[36] The Effect of Moment and Flexural Rigidity of Adherend on the Strength of Adhesively Bonded Single Lap Joints
Gultekin, Kursat
Akpinar, Salih
Otzel, Adnan
JOURNAL OF ADHESION, 2015, 91 (08): : 637 - 650
[37] Numerical stress analysis of carbon-fibre-reinforced epoxy composite single-lap joints
Ribeiro, F. L.
Borges, L.
d'Almeida, J. R. M.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2011, 31 (05) : 331 - 337
[38] The effects of adherend thickness on the fatigue strength of adhesively bonded single-lap joints
Sahin, Resul
Akpinar, Salih
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2021, 107
[39] Stress analysis in single and multi fastened single-lap composite joints
Chun, HJ
Choi, JM
Byun, JH
FRACTURE AND STRENGTH OF SOLIDS VI, PTS 1 AND 2, 2006, 306-308 : 823 - 828
[40] Effect of Adherend Thickness on Near-Field Ultrasonic Welding of Single-Lap CF/LMPAEK Thermoplastic Composite Joints
Guevara-Sotelo, Natalia Sofia
Villegas, Irene Fernandez
MATERIALS, 2023, 16 (21)

← 1 2 3 4 5 →