Experimental and numerical analysis of single lap composite joints with inter-adherend fibers

被引：18
|
作者：
Beylergil, Bertan [2 ]
Cunedioglu, Yusuf [2 ]
Aktas, Alaattin [1 ]
机构：
[1] Istanbul Univ, Dept Mech Engn, Fac Engn, TR-34320 Istanbul, Turkey
[2] Nigde Univ, Dept Mech Engn, Fac Engn, TR-51245 Nigde, Turkey
来源：
COMPOSITES PART B-ENGINEERING | 2011年 / 42卷 / 07期
关键词：
Adhesion; Mechanical testing; Numerical analysis; Stitching; I DELAMINATION TOUGHNESS; LAMINATED COMPOSITES; BONDED JOINTS; STRENGTH; MODE; FAILURE; PERFORMANCE; BEHAVIOR; DAMAGE; CFRPS;
D O I：
10.1016/j.compositesb.2011.06.010
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this study, a novel reinforcing method for glass-fiber reinforced composites, which consists of inter-adherend glass fibers (IAF) that get through the composite adherend like a pin, was investigated experimentally and numerically. Two types of joints were investigated. One is the traditional single lap joint without inter-adherend (Type A) and the other is Type B in which the fiber pin was used. Static tensile tests were performed at ambient environment in accordance with ASTM standards. In the numerical analysis, ANSYS 12.0 software package was used. The results show that the fibers improve the ultimate strength and damage tolerance of composite joints. In addition, the numerical results show a good agreement with the experimental ones. (C) 2011 Elsevier Ltd. All rights reserved.
引用
收藏
页码：1885 / 1896
页数：12
相关论文
共 50 条
  • [21] Stress Distribution in Single Lap Joints with a Cracked Composite Adherend-Part II: Laminated Adherends
    Shishesaz, Mohammad
    Reza, Arash
    Daniali, Majid
    JOURNAL OF ADHESION, 2014, 90 (12): : 933 - 954
  • [22] Optimization of adhesively-bonded single lap joints by adherend notching
    Sancaktar, E
    Simmons, SR
    JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2000, 14 (11) : 1363 - 1404
  • [23] Numerical analysis and optimization of adhesively-bonded single lap joints by adherend notching using a full factorial design of experiment
    Haddou, Y. M.
    Salem, M.
    Amiri, A.
    Amiri, R.
    Abid, S.
    INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2023, 126
  • [24] Experimental investigation and numerical simulation of composite laminate adhesively bonded single-lap joints
    Liang, Zudian
    Yan, Ying
    Zhang, Taotao
    Li, Jianfeng
    Meng, Xiangji
    Liao, Baohua
    Beijing Hangkong Hangtian Daxue Xuebao/Journal of Beijing University of Aeronautics and Astronautics, 2014, 40 (12): : 1786 - 1792
  • [25] Effect of adherend's rigidity on the shear strength of single lap adhesive joints
    Reis, P. N. B.
    Ferreira, J. A. M.
    Antunes, F.
    INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2011, 31 (04) : 193 - 201
  • [26] Numerical analysis of a thick-adherend lap shear specimen
    Tsai, MY
    Morton, J
    Oplinger, DW
    JOURNAL OF ADHESION, 1997, 62 (1-4): : 257 - 280
  • [27] Experimental investigation on shear strength of composite single-lap joints
    Chen, Lie
    Xiong, Jun-Jiang
    Cheng, Ze-Lin
    Cailiao Gongcheng/Journal of Materials Engineering, 2009, (11): : 31 - 35
  • [28] Experimental and numerical investigation on composite single-lap single-bolt sandwich joints with different geometric parameters
    Li, Mengzhen
    Liu, Zhiping
    Yan, Renjun
    Lu, Jiapeng
    Guedes Soares, C.
    MARINE STRUCTURES, 2022, 85
  • [29] Interlaminar stresses and adhesive layer stresses in single lap and socket tubular adhesively bonded joints with a delaminated composite adherend
    Esmaeel, Ramadan A.
    Taheri, Farid
    ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 2010, 240
  • [30] Analysis of single lap adhesive composite joints with delaminated adherends
    Qin, MH
    Dzenis, YA
    COMPOSITES PART B-ENGINEERING, 2003, 34 (02) : 167 - 173
12345