Experimental and numerical analysis of single lap composite joints with inter-adherend fibers

被引：18

作者：

Beylergil, Bertan ^{[2
]}

Cunedioglu, Yusuf ^{[2
]}

Aktas, Alaattin ^{[1
]}

机构：

[1] Istanbul Univ, Dept Mech Engn, Fac Engn, TR-34320 Istanbul, Turkey

[2] Nigde Univ, Dept Mech Engn, Fac Engn, TR-51245 Nigde, Turkey

来源：

COMPOSITES PART B-ENGINEERING | 2011年 / 42卷 / 07期

关键词：

Adhesion; Mechanical testing; Numerical analysis; Stitching; I DELAMINATION TOUGHNESS; LAMINATED COMPOSITES; BONDED JOINTS; STRENGTH; MODE; FAILURE; PERFORMANCE; BEHAVIOR; DAMAGE; CFRPS;

D O I：

10.1016/j.compositesb.2011.06.010

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In this study, a novel reinforcing method for glass-fiber reinforced composites, which consists of inter-adherend glass fibers (IAF) that get through the composite adherend like a pin, was investigated experimentally and numerically. Two types of joints were investigated. One is the traditional single lap joint without inter-adherend (Type A) and the other is Type B in which the fiber pin was used. Static tensile tests were performed at ambient environment in accordance with ASTM standards. In the numerical analysis, ANSYS 12.0 software package was used. The results show that the fibers improve the ultimate strength and damage tolerance of composite joints. In addition, the numerical results show a good agreement with the experimental ones. (C) 2011 Elsevier Ltd. All rights reserved.

引用

页码：1885 / 1896

页数：12

共 50 条

[1] Analysis of composite single lap joints using numerical and experimental approach
Vijaya kumar, R. L.
Bhat, M. R.
Murthy, C. R. L.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2014, 28 (10) : 893 - 914
[2] Reinforcing an aluminum/GFRP co-cured single lap joint using inter-adherend fiber
Matsuzaki, Ryosuke
Shibata, Motoko
Todoroki, Akira
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2008, 39 (05) : 786 - 795
[3] EFFECTS OF ADHEREND DEFLECTIONS IN SINGLE LAP JOINTS
OPLINGER, DW
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 1994, 31 (18) : 2565 - 2587
[4] Effects of adherend notching on the bonding performance of composite single-lap joints
Li, Shengya
Liu, Wenyang
Sun, Wei
Hou, Shujuan
ENGINEERING FRACTURE MECHANICS, 2023, 281
[5] Failure load analysis in single lap joints - effect of adherend notching
Beigrezaee, M. J.
Ayatollahi, M. R.
Bahrami, B.
da Silva, L. F. M.
ENGINEERING FAILURE ANALYSIS, 2019, 104 : 75 - 83
[6] Single Lap Joints with Rounded Adherend Corners: Stress and Strain Analysis
Zhao, X.
Adams, R. D.
da Silva, L. F. M.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2011, 25 (08) : 819 - 836
[7] Single Lap Joints with Rounded Adherend Corners: Experimental Results and Strength Prediction
Zhao, X.
Adams, R. D.
da Silva, L. F. M.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2011, 25 (08) : 837 - 856
[8] AN EXPERIMENTAL AND NUMERICAL-ANALYSIS OF RIVETED SINGLE LAP JOINTS
FUNG, CP
SMART, J
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART G-JOURNAL OF AEROSPACE ENGINEERING, 1994, 208 (G2) : 79 - 90
[9] Experimental and numerical analysis of single lap adhesively bonded joints
Raos, Pero
Matejiček, Franjo
Lucić, Mirjana
Polimeri (Zagreb), 2003, 24 (2-4): : 79 - 83
[10] Failure analysis of single lap composite laminate bolted joints: Comparison of experimental and numerical tests
Montagne, Benoit
Lachaud, Frederic
Paroissien, Eric
Martini, Dominique
Congourdeau, Fabrice
COMPOSITE STRUCTURES, 2020, 238

← 1 2 3 4 5 →