Study on the Wear Mechanism of PCD Tools in High-speed Milling of Al-Si Alloy

被引：19
|
作者：
Wang, Yongguo [1 ]
Liu, Biao [1 ]
Song, Jiongyi [2 ]
Yan, Xiangping [1 ]
Wu, Kangmei [2 ]
机构：
[1] Shanghai Univ, Sch Mechatron Engn & Automat, Shanghai 200072, Peoples R China
[2] SAIC Motor Passenger Vehicle Co Engine Plant, SAIC Motor, Shanghai 201306, Peoples R China
来源：
ADVANCED MANUFACTURING TECHNOLOGY AND CUTTING TOOLS | 2012年 / 381卷
关键词：
Wear mechanism; PCD; Al-Si alloy; Abrasive wear; Adhesive wear; PERFORMANCE;
D O I：
10.4028/www.scientific.net/AMR.381.16
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Polycrystalline diamond (PCD) tools have been obtained increasing application in aluminum alloy processing industry due to the excellent surface finish and tool life comparing with other traditional tools. Investigation of the wear mechanism of PCD milling tool for machining Al-Si alloy at cutting speed of 5000m/min (n=12732r/min) has been performed. The wear morphology of tool has been studied by scanning electron microscopy (SEM) and energy dispersive spectrometer (EDS). Results show that PCD milling tool suffers from abrasive wear and diffusion wear on the flank face and adhesive wear on the rake face in the machining process.
引用
收藏
页码：16 / +
页数：2
相关论文
共 50 条
  • [31] Tool Wear and Wear Mechanism of Carbide Tool in Cutting Al-Si Alloy Diecastings
    Shioda, Masahiko
    Mochizuki, Tatsuhiko
    Kishimoto, Yukihiro
    MATERIALS TRANSACTIONS, 2021, 62 (04) : 526 - 531
  • [32] Tool wear and wear mechanism of carbide tool in cutting Al-Si alloy diecastings
    Shioda M.
    Mochizuki T.
    Kishimoto Y.
    Keikinzoku/Journal of Japan Institute of Light Metals, 2019, 69 (03): : 174 - 179
  • [33] Machinability of SiC particle reinforced 2009Al matrix composites when high-speed milling with PCD tools
    Yingfei, Ge
    Jiuhua, Xu
    Yucan, Fu
    International Journal of Machining and Machinability of Materials, 2015, 17 (02) : 108 - 126
  • [34] Investigation of friction behavior and wear mechanism of high-silicon content Al-Si alloy
    Zhu, Xue-Wei
    Wang, Ri-Chu
    Wang, Xiao-Feng
    Peng, Jian
    Gongneng Cailiao/Journal of Functional Materials, 2015, 46 (08): : 08063 - 08066
  • [35] PCD tool performance in high-speed milling of high volume fraction SiCp/Al composites
    Tao Wang
    Lijing Xie
    Xibin Wang
    Zhiwei Ding
    The International Journal of Advanced Manufacturing Technology, 2015, 78 : 1445 - 1453
  • [36] PCD tool performance in high-speed milling of high volume fraction SiCp/Al composites
    Wang, Tao
    Xie, Lijing
    Wang, Xibin
    Ding, Zhiwei
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2015, 78 (9-12): : 1445 - 1453
  • [37] Failure mechanisms of a PCD tool in high-speed face milling of Ti-6Al-4V alloy
    Zhao, J. (zhaojun@sdu.edu.cn), 1959, Springer London (67): : 9 - 12
  • [38] Failure mechanisms of a PCD tool in high-speed face milling of Ti-6Al-4V alloy
    Li, Anhai
    Zhao, Jun
    Wang, Dong
    Zhao, Jiabang
    Dong, Yongwang
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2013, 67 (9-12): : 1959 - 1966
  • [39] High Speed Cutting of Titanium Alloy with PCD Tools
    Ota, Michiko
    Okida, Junya
    Harada, Takashi
    Toda, Naohiro
    Sumiya, Hitoshi
    ADVANCES IN ABRASIVE TECHNOLOGY XI, 2009, 389-390 : 157 - 162
  • [40] Wear mechanism of tool in high-speed milling of carbon/epoxy composite
    Lin, You-Xi
    Yu, Jie
    Lin, Hua
    Zhongguo Biaomian Gongcheng/China Surface Engineering, 2016, 29 (05): : 138 - 145
12345