Strength and porosity of additively manufactured PLA using a low cost 3D printing

被引：0
|
作者：
Habeeb, H. A. [1 ,3 ]
Alkahari, M. R. [1 ,2 ]
Ramli, F. R. [1 ,2 ]
Hasan, R. [1 ,2 ]
Maidin, S. [1 ,2 ]
机构：
[1] Univ Teknikal Malaysia Melaka, Fac Mech Engn, Durian Tunggal 76100, Melaka, Malaysia
[2] Univ Teknikal Malaysia Melaka, Ctr Adv Res Energy, Durian Tunggal 76100, Melaka, Malaysia
[3] Univ Teknikal Malaysia Melaka, Fac Mfg Engn, Durian Tunggal 76100, Melaka, Malaysia
来源：
PROCEEDINGS OF MECHANICAL ENGINEERING RESEARCH DAY 2016 | 2016年
关键词：
3D printing; additive manufacturing; rapid prototyping; porosity;
D O I：
暂无
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Nowadays, with rapid advancement in 3D printing, a relatively low cost 3D for polymer based printers using an open-source self-replicating prototype has increasingly been used in many applications. The printer variants can fabricate any complex parts. In this study, the tensile strength and porosity of PLA and its utilization in 3D printing for standard usage of low cost 3D printers using open- source has been investigated. It was found that, the parts printed from a low cost 3D printer produce relatively acceptable tensile strength and porosity as those from mid-range commercial manufacturer.
引用
收藏
页码：69 / 70
页数：2
相关论文
共 50 条
  • [41] Additively Manufactured Electronic Components in Multimaterial 3-D and 4-D Printing
    Yang, Yang
    Tentzeris, Manos M.
    PROCEEDINGS OF THE IEEE, 2024, 112 (08) : 950 - 953
  • [42] Dual-scale porosity effects on crack growth in additively manufactured metals: 3D ductile fracture models
    Muro-Barrios, R.
    Cui, Y.
    Lambros, J.
    Chew, H. B.
    JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 2022, 159
  • [43] 3D Printing of Polymers with Hierarchical Continuous Porosity
    Marascio, Matteo Gregorio Modesto
    Antons, Jens
    Pioletti, Dominique P.
    Bourban, Pierre-Etienne
    ADVANCED MATERIALS TECHNOLOGIES, 2017, 2 (11):
  • [44] A method to predict the ultimate tensile strength of 3D printing polylactic acid (PLA) materials with different printing orientations
    Yao, Tianyun
    Deng, Zichen
    Zhang, Kai
    Li, Shiman
    COMPOSITES PART B-ENGINEERING, 2019, 163 : 393 - 402
  • [45] Low-cost personalized chocolate 3D printing platform
    College of Internet of Things Engineering, Hohai University, Changzhou
    213022, China
    Jisuanji Fuzhu Sheji Yu Tuxingxue Xuebao, 6 (984-991):
  • [46] 3D printing for low cost, rapid prototyping of eyelid crutches
    Sun, Michael G.
    Rojdamrongratana, Duangmontree
    Rosenblatt, Mark, I
    Aakalu, Vinay K.
    Yu, Charles Q.
    ORBIT-THE INTERNATIONAL JOURNAL ON ORBITAL DISORDERS-OCULOPLASTIC AND LACRIMAL SURGERY, 2019, 38 (04): : 342 - 346
  • [47] Effect of Porosity and Crystallinity on 3D Printed PLA Properties
    Liao, Yuhan
    Liu, Chang
    Coppola, Bartolomeo
    Barra, Giuseppina
    Di Maio, Luciano
    Incarnato, Loredana
    Lafdi, Khalid
    POLYMERS, 2019, 11 (09)
  • [48] Low-Cost Discrete Dielectric Terahertz Lens Antenna Using 3D Printing
    Qu, Shi-Wei
    Yi, Huan
    Chan, Chi Hou
    Ng, Kung Bo
    2014 IEEE CONFERENCE ON ANTENNA MEASUREMENTS & APPLICATIONS (CAMA), 2014,
  • [49] The effect of nozzle hole diameter of 3D printing on porosity and tensile strength parts using polylactic acid material
    Triyono, Joko
    Sukanto, Heru
    Saputra, Rizki Mica
    Smaradhana, Dharu Feby
    OPEN ENGINEERING, 2020, 10 (01): : 762 - 768
  • [50] The influence of porosity, crystallinity and interlayer adhesion on the tensile strength of 3D printed polylactic acid (PLA)
    von Windheim, Natalia
    Collinson, David W.
    Lau, Trent
    Brinson, L. Catherine
    Gall, Ken
    RAPID PROTOTYPING JOURNAL, 2021, 27 (07) : 1327 - 1336
12345