Multi-criteria Optimal Design of Parallel Manipulators Based on Natural Frequency

被引：0
|
作者：
Lv, B. J. [1 ]
Zhu, S. J. [1 ]
Xing, J. F. [1 ]
机构：
[1] Naval Univ Engn, Dept Mech Engn, Wuhan, Peoples R China
来源：
APPLIED MECHANICS AND MECHANICAL ENGINEERING, PTS 1-3 | 2010年 / 29-32卷
关键词：
Gough-Stewart manipulator; natural frequency; optimal design; genetic algorithm (GA); Pareto-optimal set;
D O I：
10.4028/www.scientific.net/AMM.29-32.2435
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The Stewart manipulator has characteristics of low natural frequency, high cost and large size which make it difficult to obtain optimum performance with high dynamic response. The lowest natural frequency in the total workspace and average of six frequencies at home configuration of Stewart manipulator are introduced as indices to evaluate dynamic stability. Multi-criteria optimal design based on genetic algorithm (GA) was presented synthetically considering the workspace requirement, lowest natural frequency, average frequency and global dimensionally homogeneous Jacobian matrix condition number. An optimal result was obtained through standard GA using penalty function and the Pareto-optimal set was also obtained through parallel selection method.
引用
收藏
页码：2435 / 2442
页数：8
相关论文
共 50 条
  • [31] Optimal architecture design of parallel manipulators for best accuracy
    Ryu, J
    Cha, JG
    IROS 2001: PROCEEDINGS OF THE 2001 IEEE/RJS INTERNATIONAL CONFERENCE ON INTELLIGENT ROBOTS AND SYSTEMS, VOLS 1-4: EXPANDING THE SOCIETAL ROLE OF ROBOTICS IN THE NEXT MILLENNIUM, 2001, : 1281 - 1286
  • [32] Structure Optimal Design of Pneumatic 6-DOF Parallel Robot Based on Natural Frequency
    Wu Bo
    Xu Li
    Yu Xiao-dong
    Wang Zhi-wei
    Xu He
    ADVANCED DESIGN AND MANUFACTURE III, 2011, 450 : 349 - +
  • [33] Optimal design of parallel manipulators via LMI approach
    Lou, YJ
    Liu, GF
    Li, ZX
    2003 IEEE INTERNATIONAL CONFERENCE ON ROBOTICS AND AUTOMATION, VOLS 1-3, PROCEEDINGS, 2003, : 1869 - 1874
  • [34] Multi-criteria Scheduling in Parallel Environment with Learning Effect
    Liu, Xinbo
    Feng, Yue
    Ding, Ning
    Li, Rui
    Chen, Xin
    FOUNDATIONS OF COMPUTING AND DECISION SCIENCES, 2024, 49 (01) : 3 - 20
  • [35] Multi-criteria multi-model design optimization
    Bestle, D
    Eberhard, P
    IUTAM SYMPOSIUM ON OPTIMIZATION OF MECHANICAL SYSTEMS, 1996, 43 : 33 - 40
  • [36] Optimal Control Based Path Planning for Parallel Kinematic Manipulators Utilising Natural Motion
    Mirz, Christian
    Schoeler, Frederic
    Barreto, Juan Pablo
    Corves, Burkhard
    2018 IEEE 14TH INTERNATIONAL CONFERENCE ON AUTOMATION SCIENCE AND ENGINEERING (CASE), 2018, : 223 - 228
  • [37] Multi-criteria optimal design of stiffened Plates - II. Mathematical modelling of the optimal design of longitudinally stiffened plates
    Brosowski, B
    Ghavami, K
    THIN-WALLED STRUCTURES, 1997, 28 (02) : 179 - 198
  • [38] Multi-criteria PSO-based optimal design of grid-connected hybrid renewable energy systems
    Kouhestani, Fariborz Mansouri
    Byrne, James
    Johnson, Daniel
    Spencer, Locke
    Brown, Bryson
    Hazendonk, Paul
    Scott, Jeremy
    INTERNATIONAL JOURNAL OF GREEN ENERGY, 2020, 17 (11) : 617 - 631
  • [39] Authors' reply - To discussion of the paper 'Multi-criteria optimal structural design under uncertainty'
    Beck, JL
    Chan, E
    Irfanoglu, A
    Papadimitriou, C
    EARTHQUAKE ENGINEERING & STRUCTURAL DYNAMICS, 2000, 29 (06): : 901 - 901
  • [40] On the optimal dynamic design of laminated composite folded plates: a multi-criteria decision analysis
    Varshney, Ayush
    Khan, Arshad H.
    Yasin, M. Yaqoob
    Khan, Zahid A.
    Asjad, Mohammad
    MULTIDISCIPLINE MODELING IN MATERIALS AND STRUCTURES, 2020, 16 (02) : 322 - 339
12345