Joining of Porous Aluminum and Aluminum Dense Plate by Press Working during Foaming

被引：0
|
作者：
Otsuka, Shun [1 ,2 ]
Hangai, Yoshihiko [1 ,2 ]
Mitsugi, Hironao [1 ,2 ]
Amagai, Kenji [1 ,2 ]
机构：
[1] Gunma Univ, Grad Sch Sci & Technol, Kiryu, Gumma 3768515, Japan
[2] Gunma Univ, Kiryu, Gumma, Japan
来源：
JOURNAL OF THE JAPAN INSTITUTE OF METALS AND MATERIALS | 2022年 / 86卷 / 02期
关键词：
porous aluminum; light heating; press working; joining; foam;
D O I：
10.2320/jinstmet.J2021046]
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
In this study, porous ADC12 (Al-Si-Cu alloy) and an A1050 (commercially pure aluminum) dense plate were joined by press working during foaming. The A1050 dense plate was first heated using an optical heating device, and then the ADC12 precursor was placed on the A1050 dense plate. Next, we attempted to join porous ADC12, and the A1050 dense plate by press working during the foaming of porous ADC12. It was shown that porous ADC12 and the A1050 dense plate can be joined by press working during foaming while maintaining the pore shape of porous ADC12. The joined samples exhibited joining strengths higher than the tensile strength of the porous ADC12 itself.
引用
收藏
页码：30 / 33
页数：4
相关论文
共 50 条
  • [41] Effect of porosity of aluminum foam on welding between aluminum foam and polycarbonate plate during friction welding
    Yoshihiko Hangai
    Koki Omika
    Masahiro Inoue
    Akihiro Kitamura
    Hironao Mitsugi
    Hidetoshi Fujii
    Yuichiroh Kamakoshi
    The International Journal of Advanced Manufacturing Technology, 2022, 120 : 1071 - 1078
  • [42] Interfacial Reaction During Dissimilar Joining of Aluminum Alloy to Magnesium and Titanium Alloys
    Robson, J. D.
    Panteli, A.
    Zhang, C. Q.
    Baptiste, D.
    Cai, E.
    Prangnell, P. B.
    PROCEEDINGS OF THE 13TH INTERNATIONAL CONFERENCE ON ALUMINUM ALLOYS (ICAA13), 2012, : 761 - 770
  • [43] Compressive properties of porous aluminum alloy fabricated by joining pipes and melt through continuous casting
    Ichikawa, Junichi
    Hayashida, Tatsuro
    Suzuki, Shinsuke
    ECO-MATERIALS PROCESSING AND DESIGN XIV, 2013, 761 : 151 - +
  • [44] Investigation of Cracking Condition during Press Forming of Extruded Aluminum Sheets
    Chu, Seok Jae
    Park, Chang Gu
    Cho, Eun Hwa
    TRANSACTIONS OF THE KOREAN SOCIETY OF MECHANICAL ENGINEERS A, 2014, 38 (03) : 251 - 258
  • [45] Shaping of Aluminum Foam during Foaming Process Using Stainless Steel Mesh Mold
    Hangai, Yoshihiko
    Tsurumi, Nozomi
    Amagai, Kenji
    Utsunomiya, Takao
    Yoshikawa, Nobuhiro
    JOURNAL OF THE JAPAN INSTITUTE OF METALS AND MATERIALS, 2018, 82 (12) : 484 - 486
  • [46] Effect of tool rotating rate on foaming properties of porous aluminum fabricated by using friction stir processing
    Hangai, Yoshihiko
    Utsunomiya, Takao
    Hasegawa, Makoto
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2010, 210 (02) : 288 - 292
  • [47] Bubble size control during the gas injection foaming process in aluminum alloy melt
    Xingnan Liu
    Yanxiang Li
    Xiang Chen
    Journal of Materials Research, 2015, 30 : 1002 - 1010
  • [48] Bubble size control during the gas injection foaming process in aluminum alloy melt
    Liu, Xingnan
    Li, Yanxiang
    Chen, Xiang
    JOURNAL OF MATERIALS RESEARCH, 2015, 30 (07) : 1002 - 1010
  • [49] Preparation of Porous Ceramics with Red Mud and High-Aluminum Fly Ash by Melting Foaming Method
    Ding X.
    Pan K.
    Peng B.
    Hu X.
    Deng X.
    Ran S.
    Kuei Suan Jen Hsueh Pao/Journal of the Chinese Ceramic Society, 2022, 50 (03): : 713 - 722
  • [50] Nanostructural changes in porous anodic films on aluminum during aging
    López, V
    Otero, E
    Escudero, E
    González, JA
    SURFACE & COATINGS TECHNOLOGY, 2002, 154 (01): : 34 - 41
12345