Joining of Porous Aluminum and Aluminum Dense Plate by Press Working during Foaming

被引：0
|
作者：
Otsuka, Shun [1 ,2 ]
Hangai, Yoshihiko [1 ,2 ]
Mitsugi, Hironao [1 ,2 ]
Amagai, Kenji [1 ,2 ]
机构：
[1] Gunma Univ, Grad Sch Sci & Technol, Kiryu, Gumma 3768515, Japan
[2] Gunma Univ, Kiryu, Gumma, Japan
来源：
JOURNAL OF THE JAPAN INSTITUTE OF METALS AND MATERIALS | 2022年 / 86卷 / 02期
关键词：
porous aluminum; light heating; press working; joining; foam;
D O I：
10.2320/jinstmet.J2021046]
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
In this study, porous ADC12 (Al-Si-Cu alloy) and an A1050 (commercially pure aluminum) dense plate were joined by press working during foaming. The A1050 dense plate was first heated using an optical heating device, and then the ADC12 precursor was placed on the A1050 dense plate. Next, we attempted to join porous ADC12, and the A1050 dense plate by press working during the foaming of porous ADC12. It was shown that porous ADC12 and the A1050 dense plate can be joined by press working during foaming while maintaining the pore shape of porous ADC12. The joined samples exhibited joining strengths higher than the tensile strength of the porous ADC12 itself.
引用
收藏
页码：30 / 33
页数：4
相关论文
共 50 条
  • [21] Friction Welding of Polycarbonate Plate and Aluminum Foam Fabricated by Precursor Foaming Process
    Hangai, Yoshihiko
    Yamamoto, Yuta
    Goto, Yu
    Okada, Kenji
    Yoshikawa, Nobuhiro
    METALS, 2023, 13 (08)
  • [22] Controlling pore structure during foaming process of aluminum melt
    Song, Zhenlun
    Ma, Liqun
    He, Deping
    Zhuzao/Foundry, 1997, (04): : 9 - 11
  • [23] Foaming characteristics control during production of aluminum alloy foam
    Yang, CC
    Nakae, H
    JOURNAL OF ALLOYS AND COMPOUNDS, 2000, 313 (1-2) : 188 - 191
  • [24] Foaming of A1050 aluminum precursor by generated frictional heat during friction stir processing of steel plate
    Hangai, Yoshihiko
    Takada, Keisuke
    Fujii, Hidetoshi
    Aoki, Yasuhiro
    Aihara, Yuma
    Nagahiro, Ryohei
    Amagai, Kenji
    Utsunomiya, Takao
    Yoshikawa, Nobuhiro
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2020, 106 (7-8): : 3131 - 3137
  • [25] Foaming of aluminum foam precursor during friction stir welding
    Hangai, Yoshihiko
    Takada, Keisuke
    Endo, Ryoya
    Fujii, Hidetoshi
    Aoki, Yasuhiro
    Utsunomiya, Takao
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2018, 259 : 109 - 115
  • [26] Foaming of A1050 aluminum precursor by generated frictional heat during friction stir processing of steel plate
    Yoshihiko Hangai
    Keisuke Takada
    Hidetoshi Fujii
    Yasuhiro Aoki
    Yuma Aihara
    Ryohei Nagahiro
    Kenji Amagai
    Takao Utsunomiya
    Nobuhiro Yoshikawa
    The International Journal of Advanced Manufacturing Technology, 2020, 106 : 3131 - 3137
  • [27] X-ray Radiography Inspection of Pores of Thin Aluminum Foam during Press Forming Immediately after Foaming
    Hangai, Yoshihiko
    Kawato, Daisuke
    Ohashi, Masataka
    Ando, Mizuki
    Ogura, Takuya
    Morisada, Yoshiaki
    Fujii, Hidetoshi
    Kamakoshi, Yuichiroh
    Mitsugi, Hironao
    Amagai, Kenji
    METALS, 2021, 11 (08)
  • [28] Foaming Conditions of Porous Aluminum in Fabrication of ADC12 Aluminum Alloy Die Castings by Friction Stir Processing
    Hangai, Yoshihiko
    Ozeki, Yuichiro
    Utsunomiya, Takao
    MATERIALS TRANSACTIONS, 2009, 50 (09) : 2154 - 2159
  • [29] Laser-Generated Macroscopic and Microscopic Surface Structures for the Joining of Aluminum and Thermoplastics using Friction Press Joining
    Fuchs, Alexander N.
    Wirth, Franz X.
    Rinck, Philipp
    Zaeh, Michael F.
    8TH INTERNATIONAL CONFERENCE ON LASER ASSISTED NET SHAPE ENGINEERING (LANE 2014), 2014, 56 : 801 - 810
  • [30] Effect of Foaming Condition in the Melt on Cell Structure and Compression Strength of Porous Aluminum
    Hamada, Takeshi
    Nishi, Seiji
    Miyoshi, Tetsuji
    Kanetake, Naoyuki
    JOURNAL OF THE JAPAN INSTITUTE OF METALS, 2008, 72 (10) : 825 - 831
12345