Joining of Porous Aluminum and Aluminum Dense Plate by Press Working during Foaming

被引：0
|
作者：
Otsuka, Shun [1 ,2 ]
Hangai, Yoshihiko [1 ,2 ]
Mitsugi, Hironao [1 ,2 ]
Amagai, Kenji [1 ,2 ]
机构：
[1] Gunma Univ, Grad Sch Sci & Technol, Kiryu, Gumma 3768515, Japan
[2] Gunma Univ, Kiryu, Gumma, Japan
来源：
JOURNAL OF THE JAPAN INSTITUTE OF METALS AND MATERIALS | 2022年 / 86卷 / 02期
关键词：
porous aluminum; light heating; press working; joining; foam;
D O I：
10.2320/jinstmet.J2021046]
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
In this study, porous ADC12 (Al-Si-Cu alloy) and an A1050 (commercially pure aluminum) dense plate were joined by press working during foaming. The A1050 dense plate was first heated using an optical heating device, and then the ADC12 precursor was placed on the A1050 dense plate. Next, we attempted to join porous ADC12, and the A1050 dense plate by press working during the foaming of porous ADC12. It was shown that porous ADC12 and the A1050 dense plate can be joined by press working during foaming while maintaining the pore shape of porous ADC12. The joined samples exhibited joining strengths higher than the tensile strength of the porous ADC12 itself.
引用
收藏
页码：30 / 33
页数：4
相关论文
共 50 条
  • [1] Joining of Porous Aluminum and Aluminum Dense Plate by Press Working during Foaming
    Otsuka, Shun
    Hangai, Yoshihiko
    Mitsugi, Hironao
    Amagai, Kenji
    Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals, 2022, 86 (02): : 30 - 33
  • [2] Jointing of porous aluminum by press forming of multiple precursors during foaming process
    Ohashi M.
    Hangai Y.
    Amagai K.
    Matsubara M.
    Suzuki R.
    Utsunomiya T.
    Yoshikawa N.
    Keikinzoku/Journal of Japan Institute of Light Metals, 2021, 70 (11): : 517 - 522
  • [3] Forming and joining of porous aluminum by robot arm right after foaming
    Suzuki, Tatsumi
    Hangai, Yoshihiko
    Amagai, Kenji
    Keikinzoku/Journal of Japan Institute of Light Metals, 74 (04): : 198 - 201
  • [4] Press Forming of Aluminum Foam during Foaming of Precursor
    Hangai, Yoshihiko
    Ohashi, Masataka
    Nagahiro, Ryohei
    Amagai, Kenji
    Utsunomiya, Takao
    Yoshikawa, Nobuhiro
    MATERIALS TRANSACTIONS, 2019, 60 (11) : 2464 - 2469
  • [5] Joining of two foamed porous aluminum by roll forming immediately after foaming
    Suzuki K.
    Hangai Y.
    Amagai K.
    Keikinzoku/Journal of Japan Institute of Light Metals, 2023, 73 (01): : 31 - 35
  • [6] Analysis of the Bonding Behavior and Joining Mechanism during Friction Press Joining of Aluminum Alloys with Thermoplastics
    Wirth, F. X.
    Zaeh, M. F.
    Krutzlinger, M.
    Silvanus, J.
    PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON MANUFACTURING OF LIGHTWEIGHT COMPONENTS: MANULIGHT 2014, 2014, 18 : 215 - 220
  • [7] Press forming of aluminum foam during foaming using pin screen mold
    Hangai Y.
    Tomaru T.
    Ohashi M.
    Amagai K.
    Utsunomiya T.
    Yoshkawa N.
    Keikinzoku/Journal of Japan Institute of Light Metals, 2020, 70 (05): : 194 - 196
  • [8] Cutting of porous aluminum immediately after foaming
    Yamamoto T.
    Hangai Y.
    Mitsugi H.
    Keikinzoku/Journal of Japan Institute of Light Metals, 2021, 71 (06): : 246 - 250
  • [9] Foaming Behavior of Porous Aluminum Consisting of Dissimilar Aluminum Alloy by Optical Heating
    Nagai, Takanao
    Hangai, Yoshihiko
    Ohashi, Masataka
    Utsunomiya, Takao
    Yoshikawa, Nobuhiro
    JOURNAL OF THE JAPAN INSTITUTE OF METALS AND MATERIALS, 2020, 84 (11) : 360 - 363
  • [10] Foaming of precursor of porous aluminum consisting of dissimilar aluminum alloys by frictional heating during friction stir processing
    Nagai T.
    Morohashi H.
    Hangai Y.
    Mitsugi H.
    Aoki Y.
    Fujii H.
    Keikinzoku/Journal of Japan Institute of Light Metals, 2022, 72 (02): : 54 - 56
12345