Diesel nozzle geometry influence on spray liquid-phase fuel penetration in evaporative conditions

被引：139
|
作者：
Payri, R. [1 ]
Salvador, F. J. [1 ]
Gimeno, J. [1 ]
Zapata, L. D. [1 ]
机构：
[1] Univ Politecn Valencia, CMT Motores Term, E-46022 Valencia, Spain
来源：
FUEL | 2008年 / 87卷 / 07期
关键词：
diesel spray; penetration; injection; momentum flux; liquid-length;
D O I：
10.1016/j.fuel.2007.05.058
中图分类号：
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号：
0807 ; 0820 ;
摘要：
An experimental study of real multi-hole Diesel nozzles is performed under current DI Diesel engines operating conditions. The aim of the investigation is to study the influence of orifice geometry on the flow at the nozzle exit and to analyse its effect on the spray in evaporative conditions. Special attention is taken in the study of the influence of cavitation on the orifice internal flow and spray development. The spray liquid-phase fuel penetration has been characterized. The visualization was made in a wide optical access engine for different operating conditions. From the measurements, the dependencies of nozzle geometry, injection conditions and ambient conditions on liquid-phase length were studied and analyzed. A model for liquid-phase fuel penetration in diesel sprays based on nozzle flow parameters has been proposed and validated. (c) 2007 Elsevier Ltd. All rights reserved.
引用
收藏
页码：1165 / 1176
页数：12
相关论文
共 50 条
  • [41] Liquid penetration length in direct diesel fuel injection
    Martinez-Martinez, S.
    Sanchez-Cruz, F. A.
    Riesco-Avila, J. M.
    Gallegos-Munoz, A.
    Aceves, S. M.
    APPLIED THERMAL ENGINEERING, 2008, 28 (14-15) : 1756 - 1762
  • [42] A CFD analysis of the influence of diesel nozzle geometry on the inception of cavitation
    Macian, V
    Payri, R
    Margot, X
    Salvador, FJ
    ATOMIZATION AND SPRAYS, 2003, 13 (5-6) : 579 - 604
  • [43] Influence of the conditions of the liquid-phase oxidation of hexadecane on the reaction mechanism
    Oganesova, EY
    Bordubanova, EG
    Popova, ZV
    Bakunin, VN
    Kuz'mina, GN
    Parenago, OP
    PETROLEUM CHEMISTRY, 2004, 44 (02) : 99 - 105
  • [44] Analysis of the influence of diesel nozzle geometry in the injection rate characteristic
    Benajes, J
    Pastor, JV
    Payri, R
    Plazas, AH
    JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, 2004, 126 (01): : 63 - 71
  • [45] Modelling the influence of the nozzle geometry on the primary breakup of diesel jets
    Soriano-Palao, Oscar J.
    Sommerfeld, Martin
    Burkhardt, Axel
    INTERNATIONAL JOURNAL OF SPRAY AND COMBUSTION DYNAMICS, 2014, 6 (02) : 113 - 145
  • [46] Diesel spray atomization model considering nozzle exit turbulence conditions
    Huh, Kang Y.
    Lee, Eunju
    Koo, Ja-Ye
    Automization and Sprays: Journal of the International Institutions for Liquid Atomization and Spray Systems, 1998, 8 (04): : 453 - 469
  • [47] Diesel spray atomization model considering nozzle exit turbulence conditions
    Huh, KY
    Lee, EJ
    Koo, JY
    ATOMIZATION AND SPRAYS, 1998, 8 (04) : 453 - 469
  • [48] DIESEL FUEL SPRAY PENETRATION INTO HIGH TEMPERATURE HIGH PRESSURE GAS
    PARKS, MV
    POLONSKI, C
    TOYE, R
    SAE TRANSACTIONS, 1967, 75 : 148 - &
  • [49] Effects of injection pressure and nozzle diameter and fuel property on spray characteristics of blended diesel fuel
    Huang H.
    Zhang X.
    Jia C.
    Shi C.
    Teng W.
    2018, Chinese Society of Agricultural Engineering (34): : 45 - 51
  • [50] Effects of Diesel Injector Nozzle Hole Deposit on Fuel Injection and Spray Characteristics
    Butmarasri, Athiwat
    Nagasawa, Tsuyoshi
    Kosaka, Hidenori
    International Journal of Automotive Engineering, 2022, 13 (04) : 177 - 187
12345