Residual stress in pearlitic steel rods during progressively cold drawing measured by X-ray diffraction

被引：15

作者：

Yang, F. ^{[1
]}

Jiang, J. Q. ^{[1
]}

Wang, Y. ^{[1
]}

Ma, C. ^{[1
]}

Fang, F. ^{[1
]}

Zhao, K. L. ^{[2
]}

Li, W. ^{[2
]}

机构：

[1] SE Univ, Coll Mat Sci & Engn, Nanjing 211189, Peoples R China

[2] Harbin Bearing Grp Co, Ctr Tech, Harbin 150036, Peoples R China

来源：

MATERIALS LETTERS | 2008年 / 62卷 / 16期

关键词：

pearlitic steels; cold drawing; residual stress; X-ray diffraction;

D O I：

10.1016/j.matlet.2007.11.054

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This research aims to investigate the residual stress evolution in pearlitic steels during progressively cold drawing. To this end, pearlitic steel rods of 13 mm, diameter are continuously cold-drawn to wires of 5.3 mm, and then the residual stresses of multi-pass drawing rods are evaluated by X-ray diffraction technique. The XRD results indicate that the residual stresses of pearlitic steel rods increase gradually with the growing of drawing strain, from stress-free of original rod to high tensile stress of 650 MPa in the last pass drawing wire. (c) 2007 Elsevier B.V. All rights reserved.

引用

页码：2219 / 2221

页数：3

共 50 条

[41] Nonlinearity in residual stress measurements using X-ray powder diffraction
Liu, Ping
ACTA CRYSTALLOGRAPHICA A-FOUNDATION AND ADVANCES, 2011, 67 : C82 - C82
[42] Residual stress evaluation of industrial materials by X-ray and neutron diffraction
Hanabusa, Takao
Nishida, Masayuki
Ikeuchi, Yasukazu
Minakawa, Nobuaki
Muslih, M. Refai
PROCEEDINGS OF THE SIXTEENTH (2006) INTERNATIONAL OFFSHORE AND POLAR ENGINEERING CONFERENCE, VOL 4, 2006, : 65 - +
[43] External reference samples for residual stress analysis by X-ray diffraction
Lefebvre, F.
Francois, M.
Cacot, J.
Hemery, C.
Le-bec, P.
Baumhauer, E.
Bouscaud, D.
Bergey, T.
Blaize, D.
Gloaguen, D.
Lebrun, J. L.
Cosson, A.
Kubler, R.
Cheynet, Y.
Daniel, E.
Michaud, H.
Monvoisin, J. C.
Blanchet, P.
Allain, P.
Mrini, Y.
Sprauel, J. M.
Goudeau, P.
Barbarin, P.
Charles, C.
Le Roux, J. M.
Seiler, W.
Fischer, C.
Desmas, L.
Ouakka, A.
Moya, M. J.
Bordiec, Y.
RESIDUAL STRESSES VIII, 2011, 681 : 215 - +
[44] Residual Stress Analysis of Textured Materials by X-ray Diffraction Method
Ejiri, Shouichi
Sasaki, Toshihiko
Hirose, Yukio
THERMEC 2011, PTS 1-4, 2012, 706-709 : 1673 - +
[45] PRECIX, robotic system for residual stress analysis by X-ray diffraction
Lefebvre, F.
Le Roux, J. M.
Charles, C.
Pilliere, H.
Berthier, E.
Fontugne, C.
RESIDUAL STRESSES VIII, 2011, 681 : 202 - +
[46] X-ray Diffraction for the Determination of Residual Stress of Crystalline Material: An Overview
Arijit Lodh
Khushahal Thool
Indradev Samajdar
Transactions of the Indian Institute of Metals, 2022, 75 : 983 - 995
[47] External reference samples for residual stress analysis by X-ray diffraction
Lefebvre, F.
Wasniewski, E.
Francois, M.
Cacot, J.
Le-bec, P.
Baumhauer, E.
Bouscaud, D.
Bergey, T.
Blaize, D.
Gloaguen, D.
Cosson, A.
Jegou, S.
Cheynet, Y.
Leray, S.
Meheux, M.
Monvoisin, J. C.
Allain, P.
Vidal, J. C.
Sprauel, J. M.
Goudeau, P.
Charles, C.
Daflon, L.
Fischer, C.
Desmas, L.
Ouakka, A.
Moya, M. J.
Bordiec, Y.
Hamdi, H.
RESIDUAL STRESSES IX, 2014, 996 : 221 - +
[48] Interactions of stress corrosion cracks in cold drawn pearlitic steel wires: An X-ray micro-computed tomography study
Ramandi, Hamed Lamei
Chen, Honghao
Crosky, Alan
Saydam, Serkan
CORROSION SCIENCE, 2018, 145 : 170 - 179
[49] X-ray diffraction measurement of the residual stresses surrounding a cold expanded hole
Stefanescu, D
Edwards, L
Fitzpatrick, ME
ECRS 6: PROCEEDINGS OF THE 6TH EUROPEAN CONFERENCE ON RESIDUAL STRESSES, 2002, 404-7 : 185 - 190
[50] Residual stress characteristics in a non-circular drawing sequence of pearlitic steel wire
Baek, Hyun Moo
Hwang, Sun Kwang
Son, Il-Heon
Im, Yong-Taek
METALS AND MATERIALS INTERNATIONAL, 2016, 22 (06) : 1083 - 1090

← 1 2 3 4 5 →