Impact toughness in Al-12Si and Al-12Si-3Cu cast alloys - Part 1: Effect of process variables and microstructure

被引：29
|
作者：
Basavakumar, K. G. [1 ]
Mukunda, P. G. [1 ]
Chakraborty, M. [1 ]
机构：
[1] Indian Inst Technol, Dept Met & Mat Engn, Kharagpur 721302, W Bengal, India
来源：
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING | 2008年 / 35卷 / 04期
关键词：
impact toughness; grain refinement : modification; eutectic Al-Si cast alloys;
D O I：
10.1016/j.ijimpeng.2007.03.002
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The charpy impact energy of Al-12Si and Al-12Si-3Cu cast alloys was measured in terms of the total absorbed energy. The standard charpy specimens 10 x 10 x 55 turn with a 2 turn V-notch were prepared from the castings. Effect of process variables and microstructural changes on the impact toughness of Al-12Si and Al-12Si-3Cu cast alloys was investigated. The results indicate that combined grain refined and modified Al-12Si-3Cu cast alloys have microstructures consisting of uniformly distributed alpha-Al dendrites, eutectic Al-Si and fine CuAl2 particles in the interdendritic region. These alloys exhibited better impact toughness in the cast condition compared with the same alloy subjected to only grain refinement or modification. (C) 2007 Elsevier Ltd. All rights reserved.
引用
收藏
页码：199 / 205
页数：7
相关论文
共 50 条
  • [41] Effect of two-pass friction stir processing on the microstructure and mechanical properties of as-cast binary Al-12Si alloy
    Aktarer, S. M.
    Sekban, D. M.
    Saray, O.
    Kucukomeroglu, T.
    Ma, Z. Y.
    Purcek, G.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 636 : 311 - 319
  • [42] Effect of Al2O3 Nanoparticles as Reinforcement on the Tensile Behavior of Al-12Si Composites
    Ma, Pan
    Jia, Yandong
    Gokuldoss, Prashanth Konda
    Yu, Zhishui
    Yang, Shanglei
    Zhao, Jian
    Li, Chonggui
    METALS, 2017, 7 (09)
  • [43] Microstructure Evolution of Cast Al-Si-Cu Alloys in Solution Treatment
    ZHANG Dingfei~(1
    Journal of Wuhan University of Technology(Materials Science Edition), 2008, (02) : 184 - 188
  • [44] Microstructure evolution of cast Al-Si-Cu alloys in solution treatment
    Zhang Dingfei
    Peng Jian
    Huang Guangjie
    Zeng Dingding
    JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION, 2008, 23 (02): : 184 - 188
  • [45] Laser processing of bulk Al-12Si alloy: influence of microstructure on thermal properties
    Espana, Felix A.
    Balla, Vamsi Krishna
    Bandyopadhyay, Amit
    PHILOSOPHICAL MAGAZINE, 2011, 91 (04) : 574 - 588
  • [46] Microstructure evolution of cast Al-Si-Cu alloys in solution treatment
    Dingfei Zhang
    Jian Peng
    Guangjie Huang
    Dingding Zeng
    Journal of Wuhan University of Technology-Mater. Sci. Ed., 2008, 23
  • [47] Impact toughness and fractography of Al-Si-Cu-Mg base alloys
    Ibrahim, M. F.
    Samuel, E.
    Samuel, A. M.
    Al-Ahmari, A. M. A.
    Samuel, F. H.
    MATERIALS & DESIGN, 2011, 32 (07): : 3900 - 3910
  • [48] Effect of the Addition of La and Ce on the Solidification Behavior of Al–Cu and Al–Si–Cu Cast Alloys
    M. G. Mahmoud
    A. M. Samuel
    H. W. Doty
    F. H. Samuel
    International Journal of Metalcasting, 2020, 14 : 191 - 206
  • [49] Steel to aluminium braze welding by laser process with Al-12Si filler wire
    Sierra, G.
    Peyre, P.
    Beaume, F. Deschaux
    Stuart, D.
    Fras, G.
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2008, 13 (05) : 430 - 437
  • [50] Microstructure and properties of a 70vol.% SiCp/Al-12Si composite for electronic packaging
    Zhang, Q
    Xiu, ZY
    Song, MH
    Wu, GH
    PRICM 5: THE FIFTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, PTS 1-5, 2005, 475-479 : 881 - 884
12345