Impact toughness in Al-12Si and Al-12Si-3Cu cast alloys - Part 1: Effect of process variables and microstructure

被引：29
|
作者：
Basavakumar, K. G. [1 ]
Mukunda, P. G. [1 ]
Chakraborty, M. [1 ]
机构：
[1] Indian Inst Technol, Dept Met & Mat Engn, Kharagpur 721302, W Bengal, India
来源：
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING | 2008年 / 35卷 / 04期
关键词：
impact toughness; grain refinement : modification; eutectic Al-Si cast alloys;
D O I：
10.1016/j.ijimpeng.2007.03.002
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The charpy impact energy of Al-12Si and Al-12Si-3Cu cast alloys was measured in terms of the total absorbed energy. The standard charpy specimens 10 x 10 x 55 turn with a 2 turn V-notch were prepared from the castings. Effect of process variables and microstructural changes on the impact toughness of Al-12Si and Al-12Si-3Cu cast alloys was investigated. The results indicate that combined grain refined and modified Al-12Si-3Cu cast alloys have microstructures consisting of uniformly distributed alpha-Al dendrites, eutectic Al-Si and fine CuAl2 particles in the interdendritic region. These alloys exhibited better impact toughness in the cast condition compared with the same alloy subjected to only grain refinement or modification. (C) 2007 Elsevier Ltd. All rights reserved.
引用
收藏
页码：199 / 205
页数：7
相关论文
共 50 条
  • [31] Inference of Optimal Speed for Sound Centrifugal Casting of Al-12Si Alloys
    Agari, Shailesh Rao
    Mukunda, P. G.
    Rao, Shrikantha S.
    Sudhakar, K. G.
    JOM, 2011, 63 (05) : 25 - 29
  • [32] Effects of zinc content on strength and wear performance of Al-12Si-3Cu based alloy
    Alemdag, Yasin
    Beder, Murat
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2019, 29 (12) : 2463 - 2471
  • [33] Improvement of Microstructure, Mechanical Properties and Corrosion Resistance of Cast Al-12Si Alloy by Friction Stir Processing
    Sun, HuanHuan
    Yang, Shuai
    Jin, Duo
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2018, 71 (04) : 985 - 991
  • [34] Wear Resistance of Al-12Si Alloys by Reinforcing TiC and TiN Particles
    Samer, Ali
    Ali, Malek
    Basu, Projjal
    Ahmad, Faiz
    JOURNAL OF ENGINEERING MECHANICS, 2014, 140 (06)
  • [35] Inference of optimal speed for sound centrifugal casting of Al-12Si alloys
    Shailesh Rao Agari
    P. G. Mukunda
    Shrikantha S. Rao
    K. G. Sudhakar
    JOM, 2011, 63
  • [36] Corrosion behavior of strontium modified Al-12Si cast alloys in flowing and stagnant chloride containing media
    Meena, Lalit Kumar
    Seshagiri, R.
    Singh, Raghuvir
    JOURNAL OF ALLOYS AND COMPOUNDS, 2023, 962
  • [37] Processing defect, microstructure evolution and mechanical properties of laser powder bed fusion Al-12Si alloys
    Wang, Wei
    Zhang, Yubo
    Yue, Congcong
    Kong, Xiangqing
    Hao, Zhigang
    Wang, Tongmin
    Li, Tingju
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 26 : 681 - 696
  • [38] Microstructure and Mechanical Properties of Al-12Si Alloys Fabricated by Ultrasonic-Assisted Laser Metal Deposition
    Zhang, Yang
    Guo, Yuqi
    Chen, Yan
    Cao, Yabin
    Qi, Haibo
    Yang, Shaopu
    MATERIALS, 2020, 13 (01)
  • [39] Effect of Iron on Microstructure of Al-12Si-1Cu-0.1Mg Alloy
    Dhiman, Mohit
    Dwivedi, D. K.
    Sehgal, Rakesh
    Bhat, I. K.
    MATERIALS AND MANUFACTURING PROCESSES, 2008, 23 (08) : 805 - 808
  • [40] Microstructure and mechanical properties of Al-12Si produced by selective laser melting: Effect of heat treatment
    Prashanth, K. G.
    Scudino, S.
    Klauss, H. J.
    Surreddi, K. B.
    Loeber, L.
    Wang, Z.
    Chaubey, A. K.
    Kuehn, U.
    Eckert, J.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 590 : 153 - 160
12345