Mechanical Study on Al-based Composites Synthesized by Mechanical Milling and Hot Extrusion

被引：1

作者：

Estrada-Guel, I. ^{[1
,2
]}

Cardoso, J. L. ^{[2
]}

Careno-Gallardo, C. ^{[1
,2
]}

Barajas-Villaruel, J. I.

Miki-Yoshida, M. ^{[1
]}

Herrera-Ramirez, J. M. ^{[1
,3
]}

Martinez-Sanchez, R. ^{[1
]}

机构：

[1] Ctr Invest Mat Avanzados CIMAV, Lab Nacl Nanotecnol, Miguel de Cervantes 120, Chihuahua 31109, Chih, Mexico

[2] Univ Autonoma Metropolitana, Dept Mat, ColReynosa 02200, Mexico

[3] FCA UASLP, San Luis Potosi 78000, Mexico

来源：

METASTABLE AND NANOSTRUCTURED MATERIALS IV | 2011年 / 691卷

关键词：

tensile test; mechanical milling; aluminum composites; POWDER-METALLURGY; MATRIX COMPOSITES; ALUMINUM; GRAPHITE; WEAR; MICROSTRUCTURE; STRENGTH; BEHAVIOR;

D O I：

10.4028/www.scientific.net/MSF.691.37

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Al-based composites were fabricated by solid-state route and were characterized by optic and scanning electron microscopy in order to follow their microstructural evolution. Composites were prepared using powder metallurgy techniques in order to obtain samples to carry out mechanical tests on hot extruded and machined samples. Microstructural characterization reveals that, by milling, a homogeneous dispersion of insoluble particles into Al matrix is obtained; this produced an important improvement on hardness and strength compared with the reference. Milling intensity and particle concentration have an important effect on the mechanical properties of composites.

引用

页码：37 / +

页数：2

共 50 条

[41] A study of the microstructure of nanocrystalline Al-Ti alloys synthesized by ball milling in a hydrogen atmosphere and hot extrusion
Moon, KI
Lee, KS
JOURNAL OF ALLOYS AND COMPOUNDS, 1999, 291 (1-2) : 312 - 321
[42] Mechanical properties of Al-based amorphous/nanocrystalline alloys
Rizzi, P
Doglione, R
Battezzati, L
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 375 : 969 - 974
[43] Characterization of nanocrystalline Al-based alloy produced by mechanical milling followed by cold-pressing consolidation
Azabou, Maryam
Khitouni, Mohamed
Kolsi, Abdelwaheb
MATERIALS CHARACTERIZATION, 2009, 60 (06) : 499 - 505
[44] Dispersion of graphite nanoparticles in a 6063 aluminum alloy by mechanical milling and hot extrusion
Mendoza-Ruiz, D. C.
Esneider-Alcala, M. A.
Estrada-Guel, I.
Miki-Yoshida, M.
Lopez-Gomez, M.
Martinez-Sanchez, R.
REVIEWS ON ADVANCED MATERIALS SCIENCE, 2008, 18 (03) : 280 - 283
[45] Development of new Al-based nanocomposites by mechanical alloying
Al-Aqeeli, N.
Mendoza-Suarez, G.
Suryanarayana, C.
Drew, R. A. L.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 480 (1-2): : 392 - 396
[46] Al-based systems with unusual mechanical and transport properties
Müllerová, K
Kovácik, J
Simancík, F
Svec, P
PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS, 2005, 242 (03): : 637 - 644
[47] Deformation rate effect on the microstructure and mechanical properties of Al-SiCp composites consolidated by hot extrusion
Jahedi, Mohammad
Mani, Behtash
Shakoorian, Sheida
Pourkhorshid, Esmaeil
Paydar, Mohammad Hossein
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 556 : 23 - 30
[48] Hot extrusion of SiCp/Al-Cu composites: optimizing mechanical properties through microstructural control
Wasik, Anna
Leszczynska-Madej, Beata
Noga, Piotr
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2024, 134 (7-8): : 3611 - 3620
[49] Production and mechanical properties of metallic glass-reinforced Al-based metal matrix composites
Scudino, S.
Surreddi, K. B.
Sager, S.
Sakaliyska, M.
Kim, J. S.
Loeser, W.
Eckert, J.
JOURNAL OF MATERIALS SCIENCE, 2008, 43 (13) : 4518 - 4526
[50] Effect of SiC on Mechanical Properties of Al-Based Metal Matrix Composites Produced by Stir Casting
Sharma, Sachin Kumar
Saxena, Kuldeep Kumar
Kumar, Naveen
METAL SCIENCE AND HEAT TREATMENT, 2022, 64 (5-6) : 316 - 320

← 1 2 3 4 5 →