Mechanical Study on Al-based Composites Synthesized by Mechanical Milling and Hot Extrusion

被引：1
|
作者：
Estrada-Guel, I. [1 ,2 ]
Cardoso, J. L. [2 ]
Careno-Gallardo, C. [1 ,2 ]
Barajas-Villaruel, J. I.
Miki-Yoshida, M. [1 ]
Herrera-Ramirez, J. M. [1 ,3 ]
Martinez-Sanchez, R. [1 ]
机构：
[1] Ctr Invest Mat Avanzados CIMAV, Lab Nacl Nanotecnol, Miguel de Cervantes 120, Chihuahua 31109, Chih, Mexico
[2] Univ Autonoma Metropolitana, Dept Mat, ColReynosa 02200, Mexico
[3] FCA UASLP, San Luis Potosi 78000, Mexico
来源：
METASTABLE AND NANOSTRUCTURED MATERIALS IV | 2011年 / 691卷
关键词：
tensile test; mechanical milling; aluminum composites; POWDER-METALLURGY; MATRIX COMPOSITES; ALUMINUM; GRAPHITE; WEAR; MICROSTRUCTURE; STRENGTH; BEHAVIOR;
D O I：
10.4028/www.scientific.net/MSF.691.37
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Al-based composites were fabricated by solid-state route and were characterized by optic and scanning electron microscopy in order to follow their microstructural evolution. Composites were prepared using powder metallurgy techniques in order to obtain samples to carry out mechanical tests on hot extruded and machined samples. Microstructural characterization reveals that, by milling, a homogeneous dispersion of insoluble particles into Al matrix is obtained; this produced an important improvement on hardness and strength compared with the reference. Milling intensity and particle concentration have an important effect on the mechanical properties of composites.
引用
收藏
页码：37 / +
页数：2
相关论文
共 50 条
  • [31] Effect of AlB2-Mg interaction on the mechanical properties of Al-based composites
    Calderon, Hermes E.
    Hidalgo, Ruth G. I.
    Melgarejo, Z. Humberto
    Suarez, O. Marcelo
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (09): : 2258 - 2264
  • [32] Tuning the microstructure and mechanical properties of Al-based amorphous/crystalline composites by addition of Pd
    Gonzalez, S.
    Sort, J.
    Louzguine-Luzgin, D. V.
    Perepezko, J. H.
    Baro, M. D.
    Inoue, A.
    INTERMETALLICS, 2010, 18 (12) : 2377 - 2384
  • [33] Effect of mechanical mixing on the microstructure and mechanical properties of Al-based metal matrix composites reinforced with nanocrystalline Al-Ca intermetallics
    Chaubey, A. K.
    Kumar, Rohit
    Sahoo, Tapas
    4TH NATIONAL CONFERENCE ON PROCESSING AND CHARACTERIZATION OF MATERIALS, 2015, 75
  • [34] Study on microstructure and mechanical properties of Fe-based amorphous particle-reinforced Al-based matrix composites
    Zhou, Xiang
    Long, Wei
    Zhou, Xiaoping
    ADVANCED COMPOSITES LETTERS, 2020, 29
  • [35] Fabrication, microstructure and mechanical properties of Al-Fe intermetallic particle reinforced Al-based composites
    Xue, Yang
    Shen, Rujuan
    Ni, Song
    Song, Min
    Xiao, Daihong
    JOURNAL OF ALLOYS AND COMPOUNDS, 2015, 618 : 537 - 544
  • [36] Microstructural and mechanical properties of oxide dispersion strengthened iron aluminides produced by mechanical milling and hot extrusion
    Durga, P., V
    Prasad, K. Satya
    Chandrasekhar, S. B.
    Reddy, A., V
    Bakshi, S. R.
    Vijay, R.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2020, 834
  • [37] Mechanical properties and wear behavior of Al-2 wt.% Cu alloy composites reinforced by B4C nanoparticles and fabricated by mechanical milling and hot extrusion
    Alizadeh, A.
    Taheri-Nassaf, E.
    MATERIALS CHARACTERIZATION, 2012, 67 : 119 - 128
  • [38] SYNTHESIS OF AMORPHOUS AL-BASED ALLOY POWDERS BY MECHANICAL ALLOYING AND MECHANICAL DISORDERING
    ELESKANDARANY, MS
    AOKI, K
    SUZUKI, K
    SCIENCE REPORTS OF THE RESEARCH INSTITUTES TOHOKU UNIVERSITY SERIES A-PHYSICS CHEMISTRY AND METALLURGY, 1994, 39 (02): : 103 - 119
  • [39] Enhanced Mechanical Properties of Al7075 Alloy with Graphene Nanoplates Prepared by Ball Milling and Hot Extrusion
    Wang, Teng
    Zhang, Yitan
    Li, Guodong
    Ma, Chaoli
    Xiao, Wenlong
    HIGH PERFORMANCE STRUCTURAL MATERIALS, 2018, : 827 - 834
  • [40] Enhanced mechanical properties of Al5083 alloy with graphene nanoplates prepared by ball milling and hot extrusion
    Zhang, Haiping
    Xu, Cong
    Xiao, Wenlong
    Ameyama, Kei
    Ma, Chaoli
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 658 : 8 - 15
12345