EFFECT OF FRICTIONS ON THE BALLISTIC PERFORMANCE OF A 3D WARP INTERLOCK FABRIC: NUMERICAL ANALYSIS

被引：0
|
作者：
Ha-Minh, C. [2 ]
Boussu, F. [1 ,2 ]
Kanit, T. [2 ]
Crepin, D. [1 ,2 ]
Imad, A. [1 ,2 ]
机构：
[1] ENSAIT, GEMTEX, F-59000 Roubaix, France
[2] Univ Lille 1, F-59000 Roubaix, France
来源：
BALLISTICS 2011: 26TH INTERNATIONAL SYMPOSIUM ON BALLISTICS, VOL 1 AND VOL 2 | 2011年
关键词：
ENERGY-ABSORPTION; IMPACT; COMPOSITES;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper presents a new tool that permits to generate geometry model of any woven fabric, then, mesh this model in shell or solid elements, and apply the yarns mechanical properties to them. The tool shows many advantages over existing software. It can be largely applied because of compatibility with popular finite element codes such as Abaqus, Ansys, Radioss etc. Using this tool, a finite element model was carried out to study the effect of friction onto the ballistic impact behavior of a 3D warp interlock fabric. Results showed that the friction among yarns affects considerably on the impact behavior of this fabric. The effect of the friction between projectile and yarn is less important. The friction plays an important role in keeping the fabric structural stability during the impact event. This phenomenon explained why the projectile is easier to penetrate this 3D warp interlock fabric in the no-friction case.
引用
收藏
页码：1792 / 1802
页数：11
相关论文
共 50 条
  • [41] Ballistic performance and damage behavior of three-dimensional angle-interlock woven fabric under ballistic impact: Numerical investigation
    Zhang, Chao
    Min, Lingjie
    Ma, Pibo
    MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, 2024, 31 (26) : 8376 - 8387
  • [42] Use of 3D Angle-Interlock Woven Fabric for Seamless Female Body Armor: Part 1: Ballistic Evaluation
    Chen, Xiaogang
    Yang, Dan
    TEXTILE RESEARCH JOURNAL, 2010, 80 (15) : 1581 - 1588
  • [43] Analysis on failure mechanisms of an interlock woven fabric under ballistic impact
    Ha-Minh, C.
    Boussu, F.
    Kanit, T.
    Crepin, D.
    Imad, A.
    ENGINEERING FAILURE ANALYSIS, 2011, 18 (08) : 2179 - 2187
  • [44] Engineering Design and Mechanical Property Characterisation of 3D Warp Interlock Woven Fabrics
    A. C. Corbin
    A. Kececi
    F. Boussu
    M. Ferreira
    D. Soulat
    Applied Composite Materials, 2018, 25 : 811 - 822
  • [45] Experimental Investigation About Stamping Behaviour of 3D Warp Interlock Composite Preforms
    Dufour, Clement
    Wang, Peng
    Boussu, Francois
    Soulat, Damien
    APPLIED COMPOSITE MATERIALS, 2014, 21 (05) : 725 - 738
  • [46] Experimental Investigation About Stamping Behaviour of 3D Warp Interlock Composite Preforms
    Clément Dufour
    Peng Wang
    François Boussu
    Damien Soulat
    Applied Composite Materials, 2014, 21 : 725 - 738
  • [47] Engineering Design and Mechanical Property Characterisation of 3D Warp Interlock Woven Fabrics
    Corbin, A. C.
    Kececi, A.
    Boussu, F.
    Ferreira, M.
    Soulat, D.
    APPLIED COMPOSITE MATERIALS, 2018, 25 (04) : 811 - 822
  • [48] A Numerical Simulation on Ballistic Penetration Damage of 3D Orthogonal Woven Fabric at Microstructure Level
    Jia, Xiwen
    Sun, Baozhong
    Gu, Bohong
    INTERNATIONAL JOURNAL OF DAMAGE MECHANICS, 2012, 21 (02) : 237 - 266
  • [49] A numerical simulation on ballistic penetration damage of 3D orthogonal woven fabric at microstructure level
    Key Laboratory of High-Performance Fibers and Products, Ministry of Education, Donghua University, Shanghai 201620, China
    不详
    Int J Damage Mech, 2 (237-266):
  • [50] Experimental and Numerical Analyses of 3D Interlock Composite Preforming
    E. De Luycker
    J. G. Orliac
    F. Morestin
    P. Boisse
    D. Marsal
    S. Otin
    International Journal of Material Forming, 2010, 3 : 719 - 722
12345