EFFECT OF FRICTIONS ON THE BALLISTIC PERFORMANCE OF A 3D WARP INTERLOCK FABRIC: NUMERICAL ANALYSIS

被引：0
|
作者：
Ha-Minh, C. [2 ]
Boussu, F. [1 ,2 ]
Kanit, T. [2 ]
Crepin, D. [1 ,2 ]
Imad, A. [1 ,2 ]
机构：
[1] ENSAIT, GEMTEX, F-59000 Roubaix, France
[2] Univ Lille 1, F-59000 Roubaix, France
来源：
BALLISTICS 2011: 26TH INTERNATIONAL SYMPOSIUM ON BALLISTICS, VOL 1 AND VOL 2 | 2011年
关键词：
ENERGY-ABSORPTION; IMPACT; COMPOSITES;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper presents a new tool that permits to generate geometry model of any woven fabric, then, mesh this model in shell or solid elements, and apply the yarns mechanical properties to them. The tool shows many advantages over existing software. It can be largely applied because of compatibility with popular finite element codes such as Abaqus, Ansys, Radioss etc. Using this tool, a finite element model was carried out to study the effect of friction onto the ballistic impact behavior of a 3D warp interlock fabric. Results showed that the friction among yarns affects considerably on the impact behavior of this fabric. The effect of the friction between projectile and yarn is less important. The friction plays an important role in keeping the fabric structural stability during the impact event. This phenomenon explained why the projectile is easier to penetrate this 3D warp interlock fabric in the no-friction case.
引用
收藏
页码：1792 / 1802
页数：11
相关论文
共 50 条
  • [21] Local strain measurements of yarns inside of 3D warp interlock fabric during forming process
    Clément Dufour
    François Boussu
    Peng Wang
    Damien Soulat
    International Journal of Material Forming, 2018, 11 : 775 - 788
  • [22] Numerical Analysis of 3D Interlock Composite Preforming
    E. De Luycker
    F. Morestin
    P. Boisse
    D. Marsal
    International Journal of Material Forming, 2008, 1 : 843 - 846
  • [23] The Effect of Compaction on the Compressive Properties of a 3D Woven Interlock Fabric
    Mahadik, Y.
    Hallett, S. R.
    RECENT ADVANCES IN TEXTILE COMPOSITES, 2010, : 248 - 255
  • [24] The use of warp interlock fabric inside textile composite protection against ballistic impact
    Boussu, Francois
    TEXTILE RESEARCH JOURNAL, 2011, 81 (04) : 344 - 354
  • [25] Experimental and numerical comparisons of ballistic impact behaviors between 3D angle-interlock woven fabric and its reinforced composite
    Ma, Pibo
    Jin, Limin
    Wu, Liwei
    JOURNAL OF INDUSTRIAL TEXTILES, 2019, 48 (06) : 1044 - 1058
  • [26] Investigation of ballistic performance on 3D compound structure fabric by finite element analysis
    Yang, Dan
    Wei, Qingsong
    Chen, Xiaogang
    Li, Jinchun
    TEXTILE RESEARCH JOURNAL, 2022, 92 (11-12) : 1782 - 1795
  • [27] Experimental and numerical investigation of a 3D woven fabric subjected to a ballistic impact
    Cuong Ha-Minh
    Imad, Abdellatif
    Boussu, Francois
    Kanit, Toufik
    INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 2016, 88 : 91 - 101
  • [28] A Study on the Properties of Aramid Angle Interlock 3D Fabric and Plain Fabric
    Zhu, Li
    Yan, Tao
    Jin, Liu
    Tatyana, Merkulova
    Zhang, Shang-Yong
    TEXTILE BIOENGINEERING AND INFORMATICS SYMPOSIUM (TBIS) PROCEEDINGS, 2018, 2018, : 1034 - 1040
  • [29] Numerical simulation of 3D angle-interlock woven fabric forming and compression processes
    Liu, Yongqiang
    Pan, Zhongxiang
    Yu, Jiajia
    Hong, Xiaoyu
    Ying, Zhiping
    Wu, Zhenyu
    INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2024, 17 (03)
  • [30] A numerical study on the effects of fabric structure on the impact resistance of 3D interlock woven fabrics
    Wei, Qingsong
    Chen, Jiaxue
    Yang, Dan
    Pan, Zhongxiang
    JOURNAL OF COMPOSITE MATERIALS, 2024, 58 (20) : 2279 - 2296
12345