The effects of additive elements on the sliding wear behavior of Fe-base hardfacing alloys

被引：32
|
作者：
Lee, KY [1 ]
Lee, SH
Kim, Y
Hong, HS
Oh, YM
Kim, SJ
机构：
[1] Hanyang Univ, Div Mat Sci & Engn, Seoul 133791, South Korea
[2] Pusan Natl Univ, Div Mat Sci & Engn, Pusan 609735, South Korea
来源：
WEAR | 2003年 / 255卷
关键词：
hardfacing alloy; sliding wear; strain-induced phase transformation;
D O I：
10.1016/S0043-1648(03)00155-8
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The present research is aiming at the development of new Fe-base wear resistance alloy, which has been expected to the substitute for Stellite 6 in nuclear power industry. The effects of Cr and C addition on the wear resistance were investigated. The sliding wear tests were performed in air at the temperature range 25-300 degreesC, and also in pressurized water at 25-250 degreesC. The contact stress was 103 MPa in accordance with current nuclear power plant component designs. The composition of Fe-base alloy was optimized to improve the wear resistance. The sliding wear behaviors of the optimized Fe-base alloy and Stellite 6 were compared in the present study. The weight loss of new Fe-base alloy after 100 cycles sliding wear test was found to be smaller than that of Stellite 6. (C) 2003 Published by Elsevier Science B.V.
引用
收藏
页码：481 / 488
页数：8
相关论文
共 50 条
  • [21] Effect of alloying elements on microstructure, wear, and corrosion behavior of Fe-based hardfacing
    Kaushal Kishore
    Kuntal Sarkar
    Kanwer Singh Arora
    Welding in the World, 2023, 67 : 2463 - 2475
  • [22] Establishment of the Elastic Property Database of Fe-base Alloys
    Su, Di
    He, Yan-Lin
    Liu, Ji-Qiong
    Lu, Xiao-Gang
    PROCEEDINGS OF THE FIRST INTERNATIONAL CONFERENCE ON INFORMATION SCIENCES, MACHINERY, MATERIALS AND ENERGY (ICISMME 2015), 2015, 126 : 1840 - 1850
  • [23] The effect of boron on the abrasive wear behavior of austenitic Fe-based hardfacing alloys
    Kim, Ji Hui
    Ko, Kang Hee
    Noh, Seung Dae
    Kim, Gyung Guk
    Kim, Seon Jin
    WEAR, 2009, 267 (9-10) : 1415 - 1419
  • [24] Tempering stability of Fe-base hardfacing layer containing RE and multiple alloying
    Liu, JH
    Chen, H
    Yang, QX
    Zeng, XW
    Hu, WT
    Zhao, HL
    JOURNAL OF RARE EARTHS, 2005, 23 : 399 - 402
  • [25] Effect of alloying elements on microstructure, wear, and corrosion behavior of Fe-based hardfacing
    Kishore, Kaushal
    Sarkar, Kuntal
    Arora, Kanwer Singh
    WELDING IN THE WORLD, 2023, 67 (11) : 2463 - 2475
  • [26] The sliding wear behavior of cobalt-based hardfacing alloys used in steam valve applications
    Kostick, JA
    Segall, AE
    Conway, JC
    Amateau, MF
    Opet, S
    TRIBOLOGY TRANSACTIONS, 1997, 40 (01): : 168 - 172
  • [27] The effects of substrate compositions on adhesion of diamond films deposited on Fe-base alloys
    Li, Y. S.
    Hirose, A.
    SURFACE & COATINGS TECHNOLOGY, 2007, 202 (02): : 280 - 287
  • [28] HYDROGEN EMBRITTLEMENT OF SOME FE-BASE AMORPHOUS ALLOYS
    NAGUMO, M
    TAKAHASHI, T
    MATERIALS SCIENCE AND ENGINEERING, 1976, 23 (2-3): : 257 - 259
  • [29] A preliminary study of the development of 9Cr Fe-base ODS alloys: The effects of minor elements and cooling rate
    Jang, Jinsung
    Jang, Young Moon
    Shen, Yin Zhong
    PROGRESS IN POWDER METALLURGY, PTS 1 AND 2, 2007, 534-536 : 617 - +
  • [30] Modeling the impact-sliding wear characteristics of rare earth additive iron-based hardfacing alloys
    Singla, Yogesh Kumar
    Dwivedi, D. K.
    Arora, Navneet
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2017, 231 (11) : 1486 - 1499
12345