Hardfacing of a Modified 9Cr-1Mo Steel Component Using a Nickel-Base Alloy

被引：13
|
作者：
Kumar, Hemant [1 ]
Albert, S. K. [1 ]
Sudha, C. [1 ]
Vijayashree, R. [1 ]
Bhaduri, A. K. [1 ]
Balasubramanian, C. [2 ]
机构：
[1] Indira Gandhi Ctr Atom Res, Kalpakkam 603102, Tamil Nadu, India
[2] Omplas Syst, Madras 602101, Tamil Nadu, India
来源：
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS | 2011年 / 64卷 / 4-5期
关键词：
PTA; Deloro-50; Inconel-625; Modified 9Cr-1Mo steel; Hardfacing;
D O I：
10.1007/s12666-011-0087-4
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
A dashpot piston made of modified 9Cr-1Mo steel is hardfaced with NiCr-B alloy by the Plasma Transferred Arc (PTA) process. During initial trials, a large number of cracks were observed in the hardface deposit when hardfacing was carried out directly on the modified 9Cr-1Mo steel substrate using a preheat temperature of 723 K. Both the deposit and the martensitic structure formed in the heat affected zone of the substrate during deposition are hard and hence were unable to absorb the thermal stresses generated, leading to cracking. Subsequently, hardfacing trials carried out with an intermediate layer of 2 mm thick Inconel-625 alloy, were successful and deposits were crack-free. Use of a relatively soft Inconel-625 between the hardface deposit and the substrate reduced martensite formation in the substrate, and thus the cracking susceptibility of the deposit.
引用
收藏
页码：339 / 343
页数：5
相关论文
共 50 条
  • [41] The application of nondestructive methods for degradation evaluation of modified 9Cr-1Mo steel
    Park, Jong Seo
    Baek, Un Bong
    Nahm, Seung Hoon
    Han, Sang In
    Choi, Song Chun
    ADVANCED NONDESTRUCTIVE EVALUATION I, PTS 1 AND 2, PROCEEDINGS, 2006, 321-323 : 528 - 531
  • [42] Basic investigation for life assessment technology of modified 9Cr-1Mo steel
    Okamura, H
    Ohtani, R
    Saito, K
    Kimura, K
    Ishii, R
    Fujiyama, K
    Hongo, S
    Iseki, T
    Uchida, H
    NUCLEAR ENGINEERING AND DESIGN, 1999, 193 (03) : 243 - 254
  • [43] Microstructure and tensile properties of modified 9Cr-1Mo steel (grade 91)
    Chandravathi, KS
    Laha, K
    Rao, KBS
    Mannan, SL
    MATERIALS SCIENCE AND TECHNOLOGY, 2001, 17 (05) : 559 - 565
  • [44] The study of carbon migration in dissimilar welding of the modified 9Cr-1Mo steel
    You, YY
    Shiue, RK
    Shiue, RH
    Chen, C
    JOURNAL OF MATERIALS SCIENCE LETTERS, 2001, 20 (15) : 1429 - 1432
  • [45] Influence of intermediate rolling on mechanical behavior of modified 9Cr-1Mo steel
    Samant, S. S.
    Singh, I., V
    Singh, R. N.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 738 : 135 - 152
  • [46] Constitutive equation describing tertiary creep of a modified 9Cr-1Mo steel
    Park, KS
    Masuyama, F
    Endo, T
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1998, 84 (08): : 553 - 558
  • [47] Creep Deformation Behaviour of Modified 9Cr-1Mo Steel Clad Tubes
    Latha, S.
    Laha, K.
    Parameswaran, P.
    Reddy, G. V. Prasad
    Sasikala, G.
    Albert, Shaju K.
    STRUCTURAL INTEGRITY ASSESSMENT, ICONS 2018, 2020, : 387 - 396
  • [48] Effect of normalization temperature on the creep strength of modified 9Cr-1Mo steel
    T. C. Totemeier
    H. Tian
    J. A. Simpson
    Metallurgical and Materials Transactions A, 2006, 37 : 1519 - 1525
  • [49] Serrated yielding in 9Cr-1Mo ferritic steel
    Choudhary, BK
    Rao, KBS
    Mannan, SL
    Kashyap, BP
    MATERIALS SCIENCE AND TECHNOLOGY, 1999, 15 (07) : 791 - 797
  • [50] HYDROGEN AND TEMPER EMBRITTLEMENT IN 9CR-1MO STEEL
    HIPPSLEY, CA
    HAWORTH, NP
    MATERIALS SCIENCE AND TECHNOLOGY, 1988, 4 (09) : 791 - 802
12345