Dry sliding wear of Ti-6Al-4V alloy in air and vacuum

被引：0
|
作者：
Liu, Y [1 ]
Yang, DZ [1 ]
He, SY [1 ]
Wu, WL [1 ]
机构：
[1] Harbin Inst Technol, Space Mat & Environm Engn Lab, Harbin 150001, Peoples R China
来源：
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA | 2003年 / 13卷 / 05期
关键词：
dry sliding; titanium alloy; delamination; adhesion; deformation;
D O I：
暂无
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
Differences in wear rate, morphology of the worn surface and debris, and the microstructure in subsurface of the Ti-6Al-4V alloy after wear in air and vacuum were compared. The wear rate of Ti-6Al-4V alloy in air is higher than that in vacuum in all the ranges of sliding velocities and applied loads. The wear of Ti-6Al-4V alloy in air is controlled by a combination of abrasion, oxidation and delamination with micro-cracks remaining in subsurface. Under the vacuum condition, the surface layer of Ti-6Al-4V alloy experiences a severe plastic deformation on a great scale, which results in an ultra-fine microstructure.
引用
收藏
页码：1137 / 1140
页数：4
相关论文
共 50 条
  • [31] Effect of heat treatment on dry sliding wear of Ti-6Al-4V and Ti-6Al-7Nb implant alloys
    Ganesh, B.K.C. (bkcganesh@yahoo.com), 1600, Inderscience Enterprises Ltd., 29, route de Pre-Bois, Case Postale 856, CH-1215 Geneva 15, CH-1215, Switzerland (08):
  • [32] Effects of sliding velocity on tribo-oxides and wear behavior of Ti-6Al-4V alloy
    Li, X. X.
    Zhou, Y.
    Ji, X. L.
    Li, Y. X.
    Wang, S. Q.
    TRIBOLOGY INTERNATIONAL, 2015, 91 : 228 - 234
  • [33] Hydrogen-induced wear of Ti-6Al-4V alloy
    Yuan, Baoguo
    Yu, Haiping
    Li, Ping
    Xu, Guihua
    Li, Chunfeng
    Xue, Kemin
    Sun, Dongli
    NEW MATERIALS AND PROCESSES, PTS 1-3, 2012, 476-478 : 566 - +
  • [34] Tool wear in cryogenic turning of Ti-6Al-4V alloy
    Venugopal, K. A.
    Paul, S.
    Chattopadhyay, A. B.
    CRYOGENICS, 2007, 47 (01) : 12 - 18
  • [35] Dry sliding wear behaviour of binary powder laser cladded Ti-6Al-4V using SiC and Al
    Okoli, U. O.
    Otunniyi, I. O.
    Adebiyi, I. D.
    MATERIALS TODAY-PROCEEDINGS, 2021, 38 : 988 - 993
  • [36] Wear mechanism analysis in milling of Ti-6Al-4V alloy
    Jaffery, Syed H. I.
    Khan, Mushtaq
    Sheikh, Nadeem A.
    Mativenga, Paul
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2013, 227 (08) : 1148 - 1156
  • [37] FRACTOGRAPHIC OBSERVATIONS OF TI-6AL-4V ALLOY FATIGUED IN VACUUM
    RITTER, DL
    WEI, RP
    METALLURGICAL TRANSACTIONS, 1971, 2 (11): : 3229 - &
  • [38] Study on vacuum brazing of titanium alloy Ti-6Al-4V
    Wu, Minfang
    Jiang, Chengyu
    Yu, Zhishui
    Liang, Chao
    2002, Editorial Office of Chinese Journal of Mechanical Engineering (38):
  • [39] Comparative research on the effect of an oxide coating and a tribo-oxide layer on dry sliding wear of Ti-6Al-4V alloy
    Zhou, Yin
    Wang, Shuqi
    Chen, Wei
    Jiang, Wei
    Wang, Lan
    Chen, Kangmin
    Cui, Xianghong
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2018, 232 (12) : 1569 - 1580
  • [40] Mild wear and severe wear behavior of Ti-6Al-4V alloy at low, intermediate and high sliding speeds
    An, Jian
    Yu, Zhijia
    Duan, Hongfei
    Tian, Yuxi
    Chen, Yiguang
    SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES, 2021, 9 (03)
12345