Dry sliding wear of Ti-6Al-4V alloy in air and vacuum

被引：0
|
作者：
Liu, Y [1 ]
Yang, DZ [1 ]
He, SY [1 ]
Wu, WL [1 ]
机构：
[1] Harbin Inst Technol, Space Mat & Environm Engn Lab, Harbin 150001, Peoples R China
来源：
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA | 2003年 / 13卷 / 05期
关键词：
dry sliding; titanium alloy; delamination; adhesion; deformation;
D O I：
暂无
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
Differences in wear rate, morphology of the worn surface and debris, and the microstructure in subsurface of the Ti-6Al-4V alloy after wear in air and vacuum were compared. The wear rate of Ti-6Al-4V alloy in air is higher than that in vacuum in all the ranges of sliding velocities and applied loads. The wear of Ti-6Al-4V alloy in air is controlled by a combination of abrasion, oxidation and delamination with micro-cracks remaining in subsurface. Under the vacuum condition, the surface layer of Ti-6Al-4V alloy experiences a severe plastic deformation on a great scale, which results in an ultra-fine microstructure.
引用
收藏
页码：1137 / 1140
页数：4
相关论文
共 50 条
  • [21] High temperature dry sliding wear behaviour of selective laser melted Ti-6Al-4V alloy surfaces
    Praveenkumar, K.
    Vishnu, Jithin
    Samuel, S. Calvin
    Gopal, Vasanth
    Arivarasu, Moganraj
    Lackner, Juergen M.
    Meier, Benjamin
    Karthik, D.
    Suwas, Satyam
    Swaroop, S.
    Prashanth, K. G.
    Yadav, Mayank Kumar
    Manivasagam, Geetha
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2024, 329
  • [22] MORPHOLOGY OF WEAR DEBRIS DURING DRY SLIDING OF Ti-6Al-4V ALLOY AT HIGH TEMPERATURE UNDER VACUUM ENVIRONMENTS (SEPT, 2550044, 2024)
    Lal, Basant
    Dey, Abhijit
    Maurya, Upendra
    Ali, Ajaz
    SURFACE REVIEW AND LETTERS, 2024,
  • [23] Improving wear resistance of alloy Ti-6Al-4V
    Ucok, I
    Gungor, M
    Klug, KL
    Pickens, JR
    COST-AFFORDABLE TITANIUM: SYMPOSIUM DEDICATED TO PROFESSOR HARVEY FLOWER, 2004, : 59 - 66
  • [24] Dry friction characteristics of Ti-6Al-4V alloy under high sliding velocity
    Ming Qiu
    Yongzhen Zhang
    Jun Zhu
    Jianheng Yang
    Journal of Wuhan University of Technology-Mater. Sci. Ed., 2007, 22 : 582 - 585
  • [25] Dry Friction Characteristics of Ti-6Al-4V Alloy under High Sliding Velocity
    邱明
    Journal of Wuhan University of Technology(Materials Science Edition), 2007, (04) : 582 - 585
  • [26] Dry friction characteristics of Ti-6Al-4V alloy under high sliding velocity
    Qiu Ming
    Zhang Yongzhen
    Zhu Jun
    Yang Jianheng
    JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION, 2007, 22 (04): : 582 - 585
  • [27] Oxygen Diffusion Layer on Ti-6Al-4V Alloy: Scratch and Dry Wear Resistance
    Yazdi, R.
    Ghasemi, H. M.
    Abedini, M.
    Wang, C.
    Neville, A.
    TRIBOLOGY LETTERS, 2019, 67 (04)
  • [28] Dry sliding wear behavior of laser clad TiVCrAlSi high entropy alloy coatings on Ti-6Al-4V substrate
    Huang, Can
    Zhang, Yongzhong
    Vilar, Rui
    Shen, Jianyun
    MATERIALS & DESIGN, 2012, 41 : 338 - 343
  • [29] Oscillating and unidirectional sliding wear behaviour of cold sprayed Ti-6Al-4V coating on Ti-6Al-4V substrate
    Sirvent, P.
    Garrido, M. A.
    Lozano-Perez, S.
    Poza, P.
    SURFACE & COATINGS TECHNOLOGY, 2020, 382
  • [30] Effect of Temperature and Sliding Velocity on the Dry Sliding Wear Mechanisms of Boron Modified Ti-6Al-4V Alloys
    Dixit, Tulika
    Prasad, K. Eswar
    LUBRICANTS, 2022, 10 (11)
12345