Choosing modes for thermal treatment of deposited coatings based on chromium steel with carbide-boride-nitride doping

被引：0

作者：

Eremin, E. N. ^{[1
]}

Losev, A. S. ^{[1
]}

Borodikhin, S. A. ^{[1
]}

Ponomarev, I. A. ^{[1
]}

Matalasova, A. E. ^{[1
]}

机构：

[1] Omsk State Tech Univ, 11 Mira Ave, Omsk 644050, Russia

来源：

MECHANICAL SCIENCE AND TECHNOLOGY UPDATE (MSTU-2018) | 2018年 / 1050卷

基金：

俄罗斯科学基金会;

关键词：

D O I：

10.1088/1742-6596/1050/1/012024

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

This work explores the regimes of thermal treatment of corrosion-resistant coatings obtained by surfacing with a flux-cored wire with carbide-boride-nitride doping. It was found that tempering at a temperature of 800 degrees Celsius reduces the hardness of the metal to acceptable values for machining. To increase the hardness of the metal after tempering, it was suggested to perform quenching at a temperature of 1020 degrees Celsius. Carrying out such heat treatment ensures the hardness of the metal practically coinciding with the hardness of the metal after surfacing.

引用

页数：5

共 46 条

[41] Comparison of microstructure and mechanical properties of chromium nitride-based coatings deposited by high power impulse magnetron sputtering and by the combined steered cathodic arc/unbalanced magnetron technique
Ehiasarian, AP
Hovsepian, PE
Hultman, L
Helmersson, U
THIN SOLID FILMS, 2004, 457 (02) : 270 - 277
[42] Influence of Thermal Treatment on Structure and Properties of RF-Magnetron Calcium Phosphate Coatings Deposited on Mg-Based Alloy
Prosolov, Konstantin A.
Khimich, Margarita A.
Bolat-ool, Anna A.
Belyavskaya, Olga A.
Lastovka, Vladimir V.
Tolmachev, Alexey, I
Uvarkin, Pavel, V
Chebodaeva, Valentina V.
Chaikina, Marina, V
Sharkeev, Yurii P.
PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON PHYSICAL MESOMECHANICS. MATERIALS WITH MULTILEVEL HIERARCHICAL STRUCTURE AND INTELLIGENT MANUFACTURING TECHNOLOGY, 2020, 2310
[43] Effect of heat treatment on friction and wear behavior of Ni-based thermal spray coating deposited on Z200C12 steel
Alioui, Sarra
Himour, Abdelaziz
MATERIALS RESEARCH EXPRESS, 2019, 6 (12)
[44] Microstructure and abrasive wear resistance of metal matrix composite coatings deposited on steel grade aisi 4715 by powder plasma transferred arc welding part 2. Mechanical and structural properties of a nickel-based alloy surface layer reinforced with particles of tungsten carbide and synthetic metal–diamond composite
Czupryński, Artur
Materials, 2021, 14 (11)
[45] Microstructure and Abrasive Wear Resistance of Metal Matrix Composite Coatings Deposited on Steel Grade AISI 4715 by Powder Plasma Transferred Arc Welding Part 2. Mechanical and Structural Properties of a Nickel-Based Alloy Surface Layer Reinforced with Particles of Tungsten Carbide and Synthetic Metal-Diamond Composite
Czuprynski, Artur
MATERIALS, 2021, 14 (11)
[46] Microstructure and Abrasive Wear Resistance of Metal Matrix Composite Coatings Deposited on Steel Grade AISI 4715 by Powder Plasma Transferred Arc Welding Part 1. Mechanical and Structural Properties of a Cobalt-Based Alloy Surface Layer Reinforced with Particles of Titanium Carbide and Synthetic Metal-Diamond Composite
Czuprynski, Artur
MATERIALS, 2021, 14 (09)

← 1 2 3 4 5 →