Choosing modes for thermal treatment of deposited coatings based on chromium steel with carbide-boride-nitride doping

被引：0
|
作者：
Eremin, E. N. [1 ]
Losev, A. S. [1 ]
Borodikhin, S. A. [1 ]
Ponomarev, I. A. [1 ]
Matalasova, A. E. [1 ]
机构：
[1] Omsk State Tech Univ, 11 Mira Ave, Omsk 644050, Russia
来源：
MECHANICAL SCIENCE AND TECHNOLOGY UPDATE (MSTU-2018) | 2018年 / 1050卷
基金：
俄罗斯科学基金会;
关键词：
D O I：
10.1088/1742-6596/1050/1/012024
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
This work explores the regimes of thermal treatment of corrosion-resistant coatings obtained by surfacing with a flux-cored wire with carbide-boride-nitride doping. It was found that tempering at a temperature of 800 degrees Celsius reduces the hardness of the metal to acceptable values for machining. To increase the hardness of the metal after tempering, it was suggested to perform quenching at a temperature of 1020 degrees Celsius. Carrying out such heat treatment ensures the hardness of the metal practically coinciding with the hardness of the metal after surfacing.
引用
收藏
页数：5
相关论文
共 46 条
  • [1] Structural transformations of martensitic class coatings deposited by a flux-cored wire with carbide-boride-nitride doping during tempering
    Eremin, E. N.
    Losev, A. S.
    Borodikhin, S. A.
    Ponomarev, I. A.
    Matalasova, A. E.
    XII INTERNATIONAL SCIENTIFIC AND TECHNICAL CONFERENCE APPLIED MECHANICS AND SYSTEMS DYNAMICS, 2019, 1210
  • [2] Hardening of coatings based on chromium steel alloyed with a complex of boride compounds by quenching
    Eremin, E. N.
    Losev, A. S.
    Borodikhin, S. A.
    Ponomarev, I. A.
    Matalasova, A. E.
    XII INTERNATIONAL SCIENTIFIC AND TECHNICAL CONFERENCE APPLIED MECHANICS AND SYSTEMS DYNAMICS, 2019, 1210
  • [3] STUDY OF THE STRUCTURE OF PYROLYTIC CHROMIUM CARBIDE COATINGS DEPOSITED ON THE INSIDE SURFACE OF STEEL TUBES
    KOSTENKOV, VA
    KRASHENINNIKOV, VN
    MURATOVA, NV
    KAVERIN, BS
    PROTECTION OF METALS, 1987, 23 (03): : 297 - 302
  • [4] Effects of deposition parameters on the properties of chromium carbide coatings deposited onto steel by sputtering
    Paul, A
    Lim, J
    Choi, K
    Lee, C
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2002, 332 (1-2): : 123 - 128
  • [5] Sputter deposited chromium nitride based ternary compounds for hard coatings
    Hones, P
    Sanjines, R
    Levy, F
    THIN SOLID FILMS, 1998, 332 (1-2) : 240 - 246
  • [6] Effect of the Boride-Nitride Hardening on the Structure and Properties of Chromium Steel Deposited with a Flux-Cored Wire
    Eremin, E. N.
    Losev, A. S.
    Borodikhin, S. A.
    Ivlev, K. Ye.
    OIL AND GAS ENGINEERING (OGE-2017), 2017, 1876
  • [7] Tribo-corrosion behaviour of chromium carbide based coatings deposited by HVOF
    Pileggi, Rosanna
    Tului, Mario
    Stocchi, Domenico
    Lionetti, Stefano
    SURFACE & COATINGS TECHNOLOGY, 2015, 268 : 247 - 251
  • [8] Investigation and characterization of electrospark deposited chromium carbide-based coating on the steel
    Korkmaz, Kemal
    SURFACE & COATINGS TECHNOLOGY, 2015, 272 : 1 - 7
  • [9] STUDY OF THE STRUCTURE OF PYROLYTIC CHROMIUM-CARBIDE COATINGS DEPOSITED ON THE INSIDE SURFACE OF STEEL TUBES.
    Kostenkov, V.A.
    Krasheninnikov, V.N.
    Muratova, N.V.
    Kaverin, B.S.
    Protection of Metals (English translation of Zaschita Metallov), 1987, 23 (03): : 297 - 302
  • [10] Electrochemical behaviour of chromium nitride coatings with various preferred orientations deposited on steel by unbalanced magnetron sputtering
    Lee, C. K.
    MATERIALS SCIENCE AND TECHNOLOGY, 2006, 22 (06) : 653 - 660
12345