IMPROVEMENT OF CAVITATION SURGE IN A DOUBLE SUCTION CENTRIFUGAL PUMP BY USE OF CFD

被引:0
|
作者
Kagawa, Shusaku [1 ]
Matsushita, Naoki [1 ]
机构
[1] EBARA CORP, 78-1 Shintomi, Futtsu, Chiba 2930011, Japan
关键词
D O I
暂无
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
This paper discussed about suppressions of cavitation surge in a double suction centrifugal pump. In order to suppress the cavitation surge, CFD simulation was carried out. Cavitation surge was observed near the best efficiency point, and it was difficulty to operate the pump stably. The specific speed of the tested pump was about 81 [m3/min, min(-1), m] or 533 [ft., USGPM, In general, the main cause of the cavitation surge is inlet reverse flows at the impeller inlet. In order to prevent the inlet reverse flow, two kinds of modification at the impeller inlet were applied. One was the reduction of impeller inlet area by using a suction ring, and the other was the reduction of impeller inlet diameter. To reduce the computational time, in CFD model, a half of the double suction centrifugal pump was modeled. CFD simulations were carried out using ANSYS CFX with the Rayleigh Preset cavitation model. It was confirmed that the head fluctuation caused by the cavitation phenomena was predicted qualitatively by use of unsteady CFD simulation in the original pump impeller. The head fluctuation was about the 16% of the time averaged head and the very low frequency was confirmed by the FFT analysis. In addition, the relationship between head characteristics and cavitation behavior was observed clearly. The objective of the suction ring was to eliminate the head fluctuations caused by the cavitation. It was concluded that the suction ring was very effective to prevent the cavitation surge. On the other hand, the decrease of impeller inlet diameter was effective to reduce the head fluctuations, which became half of that for the original pump impeller. As a result, it was suggested that the complete suppression of the cavitation surge by the reduction of impeller inlet diameter was difficult in this case. It was concluded that unsteady CFD simulations with cavitation model is very effective for clarification of the impeller inlet modification on the cavitation surge.
引用
收藏
页数:6
相关论文
共 50 条
  • [41] The influence of ring clearance on the performance of a double-suction centrifugal pump
    Lei, Lei
    Wang, Tao
    Qiu, Bo
    Yu, He
    Liu, Yunqi
    Dong, Yuancheng
    PHYSICS OF FLUIDS, 2024, 36 (02)
  • [42] Investigation on Reduction of Pressure Fluctuation for a Double-Suction Centrifugal Pump
    Li, Qianqian
    Li, Shiyang
    Wu, Peng
    Huang, Bin
    Wu, Dazhuan
    CHINESE JOURNAL OF MECHANICAL ENGINEERING, 2021, 34 (01)
  • [43] Investigation on Unsteady Erosion Characteristics in Impeller of Double Suction Centrifugal Pump
    Zhang Z.
    Li Y.
    Chen D.
    Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery, 2022, 53 (04): : 140 - 148and191
  • [44] Investigation on Reduction of Pressure Fluctuation for a Double-Suction Centrifugal Pump
    Qianqian Li
    Shiyang Li
    Peng Wu
    Bin Huang
    Dazhuan Wu
    Chinese Journal of Mechanical Engineering, 2021, 34 (01) : 192 - 209
  • [45] Experimental investigation on pressure fluctuations in suction chamber and volute of a double-suction centrifugal pump
    Yao, Zhi-Feng
    Wang, Fu-Jun
    Xiao, Ruo-Fu
    He, Cheng-Lian
    Shuili Xuebao/Journal of Hydraulic Engineering, 2012, 43 (04): : 473 - 479
  • [46] Design and CFD performance analysis of a novel impeller for double suction centrifugal pumps
    Capurso, T.
    Bergamini, L.
    Torresi, M.
    NUCLEAR ENGINEERING AND DESIGN, 2019, 341 : 155 - 166
  • [47] CFD Simulation of Pressure, Temperature and Rotational Speed Influence on the Cavitation in Centrifugal Pump Impeller
    Gupta P.
    Subhash M.
    Dobriyal R.
    Sharma R.C.
    International Journal of Vehicle Structures and Systems, 2023, 15 (02) : 147 - 153
  • [48] Improvement Design of a Two-Stage Double-Suction Centrifugal Pump for Wide-Range Efficiency Enhancement
    Zhu, Di
    Hu, Zilong
    Chen, Yan
    Wang, Chao
    Yang, Youchao
    Lu, Jiahao
    Song, Xijie
    Tao, Ran
    Wang, Zhengwei
    Ma, Wensheng
    WATER, 2023, 15 (09)
  • [49] Hydrodynamic improvement by adding inlet baffles on centrifugal pump for reducing cavitation instabilities
    Wei, Zhicong
    Tao, Ran
    Xiao, Ruofu
    Hu, Honglin
    JOURNAL OF VIBRATION AND CONTROL, 2023, 29 (1-2) : 334 - 345
  • [50] Impact of Double-Suction Pump Eye Diameter Variation on Cavitation Phenomena
    Oh, Kyungseok
    Kim, Junho
    MACHINES, 2024, 12 (09)